SNDWAY SW-S50

Download PDF
Contents

SNDWAY SW-S50 Handheld Laser Distance Meter User Manual

Model: SW-S50 | Brand: SNDWAY

1. Introduction

This user manual provides detailed instructions for the operation and maintenance of the SNDWAY SW-S50 Handheld Laser Distance Meter. Please read this manual carefully before using the device to ensure proper and safe operation.

The SNDWAY SW-S50 is a versatile tool designed for precise measurement of distance, area, volume, and angles. It features advanced functions such as Pythagorean measurement, continuous measurement, staking-out, and delay measurement, making it suitable for various professional and DIY applications.

2. Product Overview

2.1 Key Features

  • Multifunctional: Individual and continuous distance measurement, area, volume, and angle measurement, Pythagorean theorem, addition and subtraction, large LCD screen with backlight.
  • Connect to Computer: Transfer device recordings to a computer and configure 7 options.
  • Multi-directional Electronic Level Bubble: Simulates actual horizontal bubble function, measures tilt angle relative to horizontal and vertical positions.
  • Staking-out: Find positions corresponding to a set distance.
  • Delay Measurement: Convenient for delayed measurements. Long press the button to start.

2.2 Package Contents

The package includes the following items:

  • 1 x Laser Distance Meter
  • 1 x Portable Bag
  • 1 x USB Connector
  • 1 x Disk (Software/Drivers)
  • 1 x Hand Strap
  • 1 x User Manual
SNDWAY SW-S50 Laser Distance Meter and included accessories: portable bag, USB cable, software disk, hand strap, and user manual.

Figure 2.1: Contents of the SNDWAY SW-S50 package.

3. Setup

3.1 Battery Installation

The device requires 3 x AAA 1.2V batteries (not included). To install the batteries:

  1. Open the battery compartment cover on the back of the device.
  2. Insert three AAA batteries, ensuring correct polarity (+/-).
  3. Close the battery compartment cover securely.

3.2 Initial Power On

Press the READ button to power on the device. The LCD screen will illuminate.

3.3 Unit Selection

Press the UNIT button to cycle through measurement units: meters (m), inches (in), and feet (ft).

4. Operating Instructions

4.1 Basic Measurement

To perform a single distance measurement:

  1. Point the laser at the target.
  2. Press the READ button. The measured distance will be displayed on the screen.
SNDWAY SW-S50 displaying a single distance measurement of 1.300 meters for a box.

Figure 4.1: Single Distance Measurement.

4.2 Continuous Measurement (Tracking)

For continuous measurement, also known as tracking mode, the device will constantly update the distance as you move it.

  1. Long press the READ button.
  2. Move the device. The maximum and minimum values will be displayed on the screen along with the current distance.
SNDWAY SW-S50 illustrating continuous measurement, showing how the device tracks distance as it moves along a wall or corner.

Figure 4.2: Continuous Measurement Mode.

4.3 Area Measurement

To measure the area of a rectangular space:

  1. Enter Area Measurement mode (refer to device interface for specific button).
  2. Measure the length.
  3. Measure the width. The device will automatically calculate and display the area.
SNDWAY SW-S50 demonstrating area measurement, showing measurements of length and width to calculate the area of a room.

Figure 4.3: Area Measurement.

4.4 Volume Measurement

To measure the volume of a space:

  1. Enter Volume Measurement mode.
  2. Measure the length.
  3. Measure the width.
  4. Measure the height. The device will automatically calculate and display the volume.
SNDWAY SW-S50 demonstrating volume measurement, showing measurements of length, width, and height to calculate the volume of a room.

Figure 4.4: Volume Measurement.

4.5 Pythagorean Measurement

The device supports various Pythagorean measurement modes to calculate indirect distances (e.g., height of a building).

  1. Select the desired Pythagorean mode.
  2. Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
  3. The device will calculate and display the unknown side.
SNDWAY SW-S50 illustrating different Pythagorean measurement scenarios, including calculating height from two or three measurements.

Figure 4.5: Pythagorean Measurement Examples.

4.6 Multi-directional Electronic Level Bubble

The integrated electronic level bubble allows for precise angle measurement and ensures the device is level during measurements.

SNDWAY SW-S50 displaying its multi-directional electronic level bubble, showing tilt angles in both horizontal and vertical orientations.

Figure 4.6: Electronic Level Bubble in Use.

4.7 Auxiliary Camera Measurement

For outdoor use or in bright conditions where the laser spot may be difficult to see, the auxiliary camera can assist in targeting.

SNDWAY SW-S50 showing its auxiliary camera display, which helps in targeting the laser spot in bright outdoor conditions.

Figure 4.7: Auxiliary Camera for Targeting.

4.8 Data Storage and PC Connection

The device can store up to 100 sets of measurement data. This data can be transferred to a computer using the provided USB connector and software for further analysis or printing.

SNDWAY SW-S50 connected to a computer via USB, showing the software interface for data export and printing.

Figure 4.8: Connecting to a Computer for Data Transfer.

5. Maintenance

5.1 Cleaning

Regularly clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the laser lens is free from dust and debris for accurate measurements.

5.2 Storage

When not in use, store the device in its portable bag in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.

5.3 Calibration

The device features a self-calibration function. Refer to the device's on-screen menu or the full user manual for instructions on how to perform self-calibration if you suspect measurement inaccuracies.

6. Troubleshooting

ProblemPossible CauseSolution
Device does not power on.Low or dead batteries; incorrect battery installation.Replace batteries; ensure correct polarity.
Inaccurate measurements.Laser lens is dirty; device not stable; target surface is reflective or transparent; device needs calibration.Clean laser lens; ensure stable measurement; use a non-reflective target; perform self-calibration.
Laser spot not visible outdoors.Bright ambient light.Use the auxiliary camera function for targeting.
Cannot connect to computer.Incorrect USB cable; driver not installed; software issue.Use the provided USB cable; install drivers from the included disk; restart software/computer.

7. Specifications

FeatureSpecification
BrandSNDWAY
Model NumberSW-S50
Working Range50 m
Accuracy± 2 mm
Unit Optionsm / in / ft
Continuous MeasurementYes
Area MeasurementYes
Volume MeasurementYes
Pythagorean MeasurementYes
Addition/SubtractionYes
Staking-outYes
Delay MeasurementYes
Self-calibrationYes
Min/Max Value DisplayYes
USB ConnectorYes
Max Storage100 units
Angle Sensor± 90 degrees
Multi-directional Electronic Level BubbleYes
BacklightYes
Button/Key SoundYes
Laser LevelClass II
Laser Type635 nm, <1 mW
Auto-laser Off20 ~ 120 seconds
Auto Power Off100 ~ 300 seconds
Storage Temperature-20 to 60 °C
Operating Temperature0-40 °C
Storage Humidity85% RH
Battery Type3 x AAA 1.2V (not included)
Dimensions125 x 53 x 26 mm
Weight117 g

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Hermosairis

First Available Date: August 13, 2020

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.