Introduction
This manual provides essential information for the safe and efficient operation of your Bostitch Office KT-VLED1810-WHITE Rechargeable LED Desk Lamp. Please read these instructions thoroughly before use and retain them for future reference.
The Bostitch Office KT-VLED1810-WHITE is a portable, battery-operated LED desk lamp designed for versatile lighting needs. Its compact, folding design makes it suitable for various environments, including home, office, or dorm rooms. The lamp features a rechargeable lithium-ion battery, three adjustable color temperature modes, and multiple dimming levels to optimize your lighting experience.
Safety Information
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Do not expose the lamp to water or excessive moisture. This product is not waterproof and is intended for indoor use only.
- Avoid disassembling, repairing, or modifying the lamp. Unauthorized modifications may void the warranty and pose safety risks.
- Keep the lamp away from direct heat sources, open flames, and flammable materials.
- Use only the provided USB charging cord or a certified equivalent for recharging the battery.
- Do not operate the lamp if it has been damaged in any way.
- Dispose of the battery and lamp according to local regulations. Do not dispose of batteries in household waste.
- Ensure the lamp is placed on a stable, flat surface to prevent tipping.
Package Contents
Verify that all items are present in the package:
- Bostitch Office KT-VLED1810-WHITE Rechargeable LED Desk Lamp
- 3-foot USB Charging Cord
- User Manual (this document)
Product Overview
Familiarize yourself with the components of your LED desk lamp.
Setup
Initial Charging
- Unfold the lamp to its upright position.
- Locate the USB charging port on the base of the lamp.
- Connect the smaller end of the included 3-foot USB charging cord to the lamp's charging port.
- Connect the larger end of the USB charging cord to a compatible USB power adapter (not included) or a powered USB port (e.g., on a computer).
- A small red LED indicator light on the base will illuminate to confirm charging is in progress. This light will turn off once the battery is fully charged.
- Allow approximately 2-3 hours for a full charge. A fully charged battery provides up to three hours of continuous use, depending on the brightness and color temperature settings.
Positioning the Lamp
The lamp features a flip-open design, allowing the lamp head to adjust up to 180 degrees. Position the lamp head to direct light as desired for your task or environment.
Operating Instructions
The lamp is controlled by a single touch-sensitive button located on the base.
- Power On/Off: Lightly touch the power button once to turn the lamp on. Touch it again to turn the lamp off.
- Adjusting Color Temperature: When the lamp is on, repeatedly touch the power button to cycle through the three available color temperature modes:
- 2700K (Warm White): Ideal for relaxing or creating a cozy ambiance.
- 4000K (Neutral White): Suitable for general reading and everyday tasks.
- 6500K (Cool White): Best for focused work and detailed tasks.
- Adjusting Brightness (Dimming Levels): Each color temperature mode has three dimming levels. To adjust brightness, press and hold the power button while the lamp is on. The brightness will cycle through its levels. Release the button when the desired brightness is reached.
Maintenance
Cleaning
- Ensure the lamp is turned off and unplugged from its power source before cleaning.
- Wipe the lamp's surfaces with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
Storage
When not in use for extended periods, fold the lamp into its compact position and store it in a cool, dry place away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Connect the lamp to a power source using the USB charging cord and allow it to charge. |
| Lamp does not charge. | USB cable or power adapter is faulty. Charging port is damaged. | Try a different USB cable or power adapter. Ensure the charging cable is securely connected. If the issue persists, contact customer support. |
| Light output is dim or inconsistent. | Low battery charge. Incorrect brightness setting. | Recharge the lamp. Adjust the brightness by pressing and holding the touch button. |
| Cannot change color temperature. | Incorrect operation. | Ensure the lamp is on, then repeatedly touch the power button to cycle through color modes. |
Specifications
| Model Number | KT-VLED1810-WHITE |
| Brand | Bostitch |
| Light Source Type | LED |
| Power Source | Battery Powered (1 Lithium Ion battery, included) |
| Battery Life | Up to 3 hours (depending on settings) |
| Charging Port | USB (3-foot USB charging cord included) |
| Wattage | 4.5 watts |
| Voltage | 5 Volts |
| Brightness | 180 Lumens (Maximum) |
| Color Temperatures | 2700K (Warm White), 4000K (Neutral White), 6500K (Cool White) |
| Control Method | Touch |
| Adjustable Head | Up to 180 degrees |
| Dimensions (Folded) | 2.13"D x 2.5"W x 11.02"H |
| Item Weight | 12.8 ounces |
| Material | Plastic |
| Indoor/Outdoor Usage | Indoor use only |
| Assembly Required | No |
| UPC | 842048031628 |
Warranty and Support
This Bostitch Office KT-VLED1810-WHITE Rechargeable LED Desk Lamp is covered by a 1-year manufacturer's warranty from the date of purchase.
The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.
For warranty claims, technical support, or product inquiries, please contact Bostitch customer service. Please have your model number (KT-VLED1810-WHITE) and proof of purchase available when contacting support.
For more information, visit the official Bostitch website or refer to your purchase documentation.