Smof 8 Pin Bluetooth Adapter Receiver for Bose Sounddock III/XT and Other Compatible Docking Stations

1. Product Overview

The Smof 8 Pin Bluetooth Adapter Receiver (Model BT4812) is designed to upgrade your existing 8-pin docking station, allowing it to receive audio wirelessly via Bluetooth 5.1. This adapter breathes new life into older speaker systems, enabling seamless music streaming from your smartphone or other Bluetooth-enabled devices without the need for cables.

Image: The Smof 8 Pin Bluetooth Adapter Receiver, a compact black device designed to add Bluetooth functionality to compatible speaker docks.

2. Package Contents

Verify that all items are present in your package:

Smof 8 Pin Bluetooth Adapter
User Manual

Package contents of Smof 8 Pin Bluetooth Adapter

Image: The Smof 8 Pin Bluetooth Adapter and its user manual, as included in the product packaging.

3. Compatibility

This Smof 8 Pin Bluetooth Adapter is specifically designed for use with the following 8-pin speaker docking stations:

Bose Sounddock III
Bose XT
JBL MS302GM
Philips DS1155B/93
Philips AJ7260D/93
RSR DS406BT
Yamaha TSX-14
iHome IPL8BN
Zeppelin Air C Bowers & Wilkons

Important Note:

This adapter is NOT compatible with 30-pin speakers or car audio systems.
Before purchasing, please confirm your speaker model is listed above.

Compatible speaker models for Smof 8 Pin Bluetooth Adapter

Image: A visual representation of the specific speaker models compatible with the Smof 8 Pin Bluetooth Adapter.

4. Setup Instructions

Follow these steps to connect and pair your Smof 8 Pin Bluetooth Adapter:

Insert the Adapter: Carefully plug the Smof 8 Pin Bluetooth Adapter into the 8-pin dock connector on your compatible speaker. Ensure it is firmly seated.

Smof 8 Pin Bluetooth Adapter inserted into a speaker dock

Image: The Smof 8 Pin Bluetooth Adapter correctly inserted into the docking port of a speaker.

Power On and Pairing Mode: Once inserted, the adapter will automatically power on and enter pairing mode. A blue indicator light on the adapter will flash, indicating it is ready to be paired.

Close-up of Smof 8 Pin Bluetooth Adapter with blue indicator light

Image: A close-up view of the Smof adapter showing its blue indicator light, signifying pairing mode.

Enable Bluetooth on Your Device: On your smartphone or other audio device, go to the Bluetooth settings and ensure Bluetooth is enabled.
Select "Smof BT4812": In the list of available Bluetooth devices, locate and select "Smof BT4812". Your device should connect automatically.
Confirmation: Once successfully paired, the blue indicator light on the adapter will stop flashing and remain solid. You can now stream audio wirelessly to your speaker.

5. Operating Instructions

After successful pairing, operating the Smof 8 Pin Bluetooth Adapter is straightforward:

Automatic Reconnection: The adapter will attempt to automatically reconnect to the last paired device when it is powered on and within range.
Playing Music: Play audio from your paired device as you normally would. The sound will be transmitted wirelessly to your docking station.
Volume Control: Adjust the volume directly from your paired device or using the volume controls on your docking station.
Disconnecting: To disconnect, simply turn off Bluetooth on your paired device or remove the adapter from the docking station.

6. Troubleshooting

If you encounter issues, refer to the following troubleshooting tips:

Problem	Possible Cause	Solution
No power/indicator light off	Adapter not fully inserted or speaker not powered.	Ensure the adapter is fully inserted into the dock. Verify the speaker is powered on.
Cannot pair with device	Bluetooth not enabled, adapter not in pairing mode, or device too far.	Ensure Bluetooth is enabled on your device. Unplug and re-plug the adapter to re-enter pairing mode (flashing blue light). Keep your device within 30 feet (10 meters) of the adapter. Forget "Smof BT4812" from your device's Bluetooth list and try pairing again.
No sound after pairing	Volume too low, incorrect audio output selected, or speaker issue.	Increase volume on both your device and the speaker. Ensure the speaker's input is set to the docking station. Test the speaker with a different audio source if possible.
Intermittent connection or poor audio quality	Interference, distance, or low battery on source device.	Move closer to the adapter. Remove obstacles between your device and the adapter. Ensure your device is fully charged. Avoid placing the adapter near other wireless devices that may cause interference.

7. Specifications

Feature	Detail
Model Number	BT4812
Product Dimensions	1.78 x 1.38 x 0.39 inches
Item Weight	0.48 ounces
Connectivity Technology	Bluetooth 5.1
Bluetooth Range	Up to 30 feet (approx. 10 meters)
Connector Type	8-pin dock connector
Audio Output Mode	Stereo
Color	Black

8. Maintenance

To ensure the longevity and optimal performance of your Smof 8 Pin Bluetooth Adapter, follow these maintenance guidelines:

Cleaning: Use a soft, dry cloth to clean the adapter. Avoid using liquid cleaners or abrasive materials.
Storage: When not in use for extended periods, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
Handling: Handle the adapter with care. Avoid dropping it or subjecting it to strong impacts, which could damage internal components.

9. Warranty and Support

The Smof 8 Pin Bluetooth Adapter comes with a 12-month warranty. If you encounter any issues or require assistance, please contact Smof customer support. Refer to the product packaging or the official Smof website for contact information.

For further support, you may visit the Smof Store on Amazon.

Smof BT4812