Artiss Adjustable Drafting Table and Stool Set User Manual

Introduction

This manual provides essential information for the safe and efficient use of your Artiss Adjustable Drafting Table and Stool Set, Model ZLJ38-SRK002. Please read these instructions carefully before assembly and operation to ensure proper functionality and longevity of the product. Keep this manual for future reference.

Safety Information

WARNING:

• Always secure the desk to the floor to prevent tipping.
• Be cautious when adjusting the height or angle of the desk to avoid injury. Ensure all locking mechanisms are engaged before use.
• Keep small parts away from children during assembly.

Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Artiss Drawing Desk x 1
• Stool x 1
• Assembly manual x 1

Setup

Assembly is required for this product. It is recommended that one person performs the assembly. Please refer to the included assembly manual for detailed, step-by-step instructions.

Assembly Overview:

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify all parts against the parts list in the separate assembly manual.
3. Follow the instructions in the assembly manual to construct the desk frame.
4. Attach the MDF desktop and secure all hardware.
5. Assemble the stool according to its specific instructions.
6. Install the side tray, drawers, and hollow metal shelf.
7. Ensure all screws and bolts are tightened securely before use.

Operating Instructions

Adjusting Desk Height:

The desk height can be adjusted from 68cm to 136cm to accommodate both sitting and standing positions. Locate the height adjustment knobs or levers on the desk legs. Loosen them, carefully raise or lower the desktop to your desired height, and then securely tighten the knobs/levers to lock the desk in place.

Adjusting Desk Top Angle:

The main desktop can be tilted from 0° to 60°. To adjust the angle, locate the tilting mechanism under the desktop. Release the locking mechanism, adjust the desktop to your preferred working angle, and then re-engage the lock to secure it.

Using Storage Features:

• Extra Slide-Out Table: A secondary table can be pulled out from under the main desktop to extend your working area.
• Removable Side Pigment Shelf: This shelf is designed to hold art supplies and can be attached or removed as needed.
• Removable Non-Woven Fabric Drawers: Two fabric drawers are provided for organized storage of smaller items. These can be easily inserted or removed from their compartments.
• Hollow Metal Shelf: A perforated metal shelf is located at the base of the desk, offering additional storage space.

Maintenance

Cleaning:

To clean the desk and stool, wipe surfaces with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish. Ensure the desk is dry after cleaning.

General Care:

• Regularly check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
• Avoid placing excessively heavy items on the desk, especially on the tilted surface.
• Protect the MDF desktop from prolonged exposure to moisture or direct sunlight to prevent warping or discoloration.

Troubleshooting

Desk Instability:

• Issue: The desk wobbles or feels unstable.
• Solution: Check that all assembly hardware (screws, bolts) are securely tightened. Ensure the desk is placed on a flat, level surface. Adjust the anti-scratch feet pads if necessary to compensate for uneven flooring.

Difficulty Adjusting Height/Angle:

• Issue: The desktop height or angle adjustment mechanism is stiff or difficult to operate.
• Solution: Ensure that the locking mechanisms are fully disengaged before attempting to adjust. Apply a small amount of silicone-based lubricant to moving parts if stiffness persists, avoiding contact with the desktop surface.

Specifications

Warranty

This Artiss product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.

Support

For any questions, concerns, or assistance with your Artiss Adjustable Drafting Table and Stool Set, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact details.