Introduction
The Kwikset 910 SmartCode Contemporary Electronic Deadbolt offers keyless entry and Z-Wave technology for seamless integration into smart home systems. This motorized deadbolt features a backlit keypad for enhanced visibility and allows for remote monitoring and control when connected to a compatible Z-Wave hub. This manual provides essential information for the proper installation, setup, operation, and maintenance of your new electronic deadbolt.
Safety Information
- Read all instructions completely before installation and operation.
- Protect your User Code and Master Code.
- Do not expose the lock to direct sunlight or rain for prolonged periods.
- Ensure the door is properly aligned and closes smoothly before installing the lock.
- Use only 4 AA alkaline batteries. Do not mix old and new batteries or different types of batteries.
Package Contents
Verify that all components are present before beginning installation:
- Deadbolt exterior assembly
- Deadbolt interior assembly
- Two keys
- Latch
- Strike Plate
- Adapter Ring
- Installation and Mounting Hardware
- SmartKey learn tool
- Installation and User Manual
Image: Kwikset SmartCode Deadbolt components.
Installation
The Kwikset 910 SmartCode deadbolt is designed for easy installation with a screwdriver, typically taking minutes. It fits standard doors between 1-3/8" and 1-3/4" thick. Refer to the included Installation Manual for detailed, step-by-step instructions and diagrams.
- Prepare the door and frame, ensuring proper bore holes and backset.
- Install the latch into the door edge.
- Install the exterior keypad assembly.
- Install the interior assembly, connecting the cable and securing with screws.
- Install the strike plate on the door frame.
- Perform the door handing process to calibrate the lock.
Image: Exterior view of the Kwikset 910 SmartCode Electronic Deadbolt.
Setup and Programming
Programming User Codes
The lock supports up to 30 programmable user codes for keyless entry. Follow the instructions in the included manual to set your Master Code and individual User Codes.
Image: Close-up of the SmartCode keypad.
Z-Wave Connectivity
The 910 SmartCode deadbolt integrates with Z-Wave security and home automation systems. To connect your lock to a Z-Wave hub (e.g., Amazon Alexa, SmartThings, Vera), initiate the pairing process on your hub and then follow the lock's specific Z-Wave inclusion instructions. This allows for remote checking of door lock status, locking/unlocking, and receiving notifications via your smart home app.
Image: Z-Wave connectivity for smart home integration.
Operating Instructions
- Keyless Entry: Enter your personalized user code on the backlit keypad, then press the Lock button. The motorized deadbolt will retract.
- One-Touch Locking: Press the Lock button on the keypad to engage the deadbolt.
- Auto-Locking: The deadbolt can be configured to automatically lock after 30 seconds of being unlocked, providing added security. Refer to the programming guide for enabling this feature.
- Manual Operation: The interior thumb-turn allows for manual locking and unlocking. The exterior keyway provides a traditional backup entry method.
Maintenance
Battery Replacement
The lock operates on 4 AA batteries, which typically last 12 months or longer. Replace batteries when the low battery indicator activates. To replace, remove the interior cover, replace the old batteries with new alkaline AA batteries, and reattach the cover.
Image: Interior view of the SmartCode deadbolt, showing battery access.
SmartKey Security Re-keying
The SmartKey Security feature allows you to re-key your lock yourself in seconds, using the provided SmartKey learn tool. This is useful if you move, lose a key, or wish to consolidate multiple Kwikset locks to a single key. Follow the specific re-keying instructions in your manual.
Image: SmartKey Security re-keying process.
Troubleshooting
- Lock not responding: Check battery levels and replace if necessary. Ensure the interior cable is securely connected.
- Keypad not lighting up: Verify batteries are correctly installed and charged.
- Z-Wave connection issues: Ensure the lock is within range of your Z-Wave hub. Re-initiate the pairing process on both the lock and the hub. Consult your Z-Wave hub's manual for specific troubleshooting steps.
- Deadbolt not extending/retracting fully: Check for any obstructions in the door frame or latch mechanism. Ensure the door is properly aligned.
- Forgotten User Code: Use the Master Code to add or delete user codes. If the Master Code is forgotten, a factory reset may be required (refer to the full manual for instructions).
Specifications
| Feature | Detail |
|---|---|
| Brand | Kwikset |
| Model Number | 99100-083 |
| Lock Type | Keypad Electronic Deadbolt |
| Special Feature | Keyless Entry, Z-Wave Technology |
| Material | Metal |
| Item Dimensions (L x W x H) | 4.27 x 3.99 x 9.74 inches |
| Power Source | 4 AA Batteries |
| Door Thickness Compatibility | 1-3/8" to 1-3/4" |
| User Codes | Up to 30 |
| Smart Home Compatibility | Amazon Alexa, SmartThings, Vera (Z-Wave hub required) |
Warranty and Support
Kwikset provides a lifetime mechanical and finish warranty for the lock and handles, and a 1-year electronics warranty. For full details regarding warranty coverage and to access customer support, please refer to the official Kwikset website or the warranty information included with your product.
For additional assistance, visit the Kwikset Store on Amazon.