Qiilu KW808 OBD2 Scanner User Manual

1. Product Overview

The Qiilu KW808 OBD2 Scanner is a professional diagnostic tool designed to help car owners and technicians quickly and accurately diagnose engine problems. It supports all OBDII/EOBD protocols, allowing it to work with most vehicles manufactured after 1996. This scanner provides comprehensive diagnostic functions including reading and clearing Diagnostic Trouble Codes (DTCs), viewing live data, freeze frame data, I/M readiness status, O2 sensor test, on-board monitor test, EVAP system test, and vehicle information.

Image 1.1: Front view of the Qiilu KW808 OBD2 Scanner, showcasing its display and control buttons.

2. Key Features

• 2.8-inch Black and White Screen: Provides clear display of diagnostic information.
• Read Codes: Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes.
• Erase Codes: Clears Diagnostic Trouble Codes (DTCs) and resets the Check Engine Light (MIL).
• Data Stream: Displays live data readings from the vehicle's sensors in real-time.
• Freeze Frame Data: Shows engine conditions at the time a fault code was set.
• O2 Sensor Test: Retrieves O2 sensor monitor test results for the most recently completed tests from the vehicle's on-board computer.
• On-Board Monitoring: Retrieves results for on-board diagnostic monitoring tests for specific components/systems.
• EVAP System Test: Initiates a leak test for the vehicle's EVAP system.
• Vehicle Information: Retrieves VIN (Vehicle Identification Number), CIN (Calibration ID Number), and CVN (Calibration Verification Number).
• Multi-language Support: Supports English, German, Dutch, French, Portuguese, Spanish, and Russian.

Image 2.1: Visual representation of the main functions of the KW808 scanner, including reading and erasing codes, data stream, and more.

3. Setup

3.1 Unpacking

Carefully remove the KW808 OBD2 Scanner from its packaging. Ensure all components are present:

• Qiilu KW808 OBD2 Scanner unit
• OBDII connection cable
• USB cable (for updates/printing)

3.2 Connecting the Device

The KW808 scanner is powered directly from the vehicle's OBDII port.

1. Locate the 16-pin Data Link Connector (DLC) in your vehicle. This is typically found under the dashboard on the driver's side.
2. Ensure the vehicle's ignition is OFF.
3. Firmly plug the OBDII connector of the scanner's cable into the vehicle's DLC.
4. Turn the vehicle's ignition to the ON position (engine can be off). The scanner will automatically power on and begin communication with the vehicle.

Image 3.1: Step-by-step guide on how to connect the OBD2 scanner to a vehicle's diagnostic port.

4. Operating Instructions

4.1 Button Functions

Familiarize yourself with the scanner's buttons for easy navigation:

• ENTER Button: Confirms a selection or action from a menu list.
• ESC Button: Returns to the previous menu or cancels an operation.
• UP/DOWN Scroll Buttons: Moves the cursor up or down through menu items.
• LEFT/RIGHT Scroll Buttons: Used for navigating within certain data displays or changing values.
• Help Button (?): Provides helpful information or definitions when pressed.
• Power Switch: Resets the scanner.

Image 4.1: Detailed diagram illustrating the function of each button on the KW808 scanner.

4.2 Reading Diagnostic Codes

1. Connect the scanner to the vehicle's DLC as described in Section 3.2.
2. From the main menu, select "Read Codes" using the UP/DOWN buttons and press ENTER.
3. The scanner will communicate with the vehicle's ECU and display any stored DTCs.
4. Use the UP/DOWN buttons to scroll through the codes and their descriptions.

4.3 Erasing Diagnostic Codes

Warning: Clearing DTCs will also clear all stored diagnostic data. Ensure you have recorded all necessary information before proceeding.

1. After reading codes, navigate back to the main diagnostic menu.
2. Select "Erase Codes" and press ENTER.
3. Confirm your choice when prompted. The Check Engine Light (MIL) should turn off if the underlying issue has been resolved.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the scanner's exterior. Do not use abrasive cleaners or solvents.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Software Updates: Periodically check the manufacturer's website for software updates to ensure optimal performance and compatibility with newer vehicles. Use the provided USB cable to connect to a computer for updates.
• Cable Care: Avoid bending or crimping the OBDII cable excessively. Always grasp the connector, not the cable, when plugging or unplugging.

Image 5.1: The KW808 scanner connected to a computer, illustrating its capability for software updates and data printing.

6. Troubleshooting

This section addresses common issues you might encounter while using the Qiilu KW808 OBD2 Scanner.

Image 6.1: A visual representation of common car issues that the KW808 scanner helps diagnose, such as excessive exhaust emissions or sudden engine cut-off.

7. Specifications

Image 7.1: Diagram showing the physical dimensions of the Qiilu KW808 OBD2 Scanner.

8. Warranty Information

Qiilu products are designed and manufactured to the highest quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase. Please retain your purchase receipt as proof of purchase.

For specific warranty terms and conditions, or to make a warranty claim, please refer to the documentation included with your product or visit the official Qiilu website.

9. Support

If you encounter any issues or have questions regarding the Qiilu KW808 OBD2 Scanner that are not covered in this manual, please contact Qiilu customer support through the following channels:

• Online Support: Visit the official Qiilu website for FAQs, troubleshooting guides, and contact forms.
• Email Support: Refer to your product packaging or the official website for the customer service email address.
• Retailer Support: Contact the retailer from whom you purchased the product for assistance.

For the latest information and software updates, please visit the Qiilu Store on Amazon.