1. Introduction
Thank you for choosing the Scheppach HCE2200 High-Pressure Cleaner. This powerful 2200W unit, with a maximum pressure of 165 bar and a flow rate of 468 liters per hour, is designed for effective cleaning tasks around your home and garden. It features a durable aluminum pump, integrated detergent tank, and a 10-meter high-pressure hose on a convenient reel. The Quick Connect system allows for fast and easy accessory changes, making it versatile for various applications such as surface cleaning, car washing, and drain cleaning.
This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your high-pressure cleaner. Please read it thoroughly before first use and keep it for future reference.
2. Safety Instructions
Always observe the following safety precautions to prevent injury or damage to the unit.
2.1 General Safety
- Read all instructions carefully before operating the appliance.
- Keep children and pets away from the operating area.
- Do not direct the water jet at people, animals, electrical equipment, or the machine itself.
- Wear appropriate personal protective equipment (PPE) such as safety glasses and hearing protection.
- Ensure the work area is well-lit and free of obstacles.
2.2 Electrical Safety
- Connect the appliance only to a properly grounded outlet.
- Do not use the appliance if the power cord or plug is damaged.
- Avoid using extension cords; if necessary, use only outdoor-rated cords with sufficient gauge.
- Never touch the plug or outlet with wet hands.
2.3 Product-Specific Safety
- High-pressure jets can be dangerous if misused.
- Always hold the spray gun firmly with both hands during operation.
- Do not operate the machine without a water supply.
- Before performing any maintenance or cleaning, always disconnect the power supply and water supply.
3. Product Overview and Components
Familiarize yourself with the various parts of your Scheppach HCE2200 High-Pressure Cleaner and its accessories.

Figure 3.1: The Scheppach HCE2200 High-Pressure Cleaner shown with its complete set of 10 accessories, including various nozzles, brushes, a patio cleaner, and a detergent tank. This image provides a comprehensive view of all components included with the unit.

Figure 3.2: A side view of the high-pressure cleaner, highlighting the integrated hose reel for convenient storage of the 10-meter high-pressure hose. The large wheels for mobility are also visible.

Figure 3.3: The rear view of the unit, demonstrating the practical storage solutions for various accessories, including brushes and the detergent tank, ensuring all tools are kept neatly together.
Main Components:
- High-Pressure Cleaner Unit
- High-Pressure Hose (10m) with Reel
- Spray Gun with Lance
- Various Nozzles (e.g., Vario nozzle, Dirt Blaster)
- Surface Cleaner Attachment
- Rotating Wash Brush
- Fixed Wash Brush
- Detergent Tank
- Water Inlet Connector
- Power Cable
4. Setup
Follow these steps to prepare your high-pressure cleaner for first use.
4.1 Unpacking and Assembly
- Carefully remove all components from the packaging.
- Attach the wheels and handle to the main unit as per the diagrams in the quick start guide (not included in this manual).
- Mount the hose reel if it is not pre-assembled.
- Connect the high-pressure hose to the outlet on the unit and to the spray gun. Ensure connections are secure.
4.2 Water Supply Connection
- Connect a garden hose (minimum 1/2 inch diameter) to the water inlet connector on the high-pressure cleaner.
- Ensure the garden hose is connected to a clean water supply with adequate flow.
- Turn on the water supply fully before starting the unit.
- Important: Do not use hot water or contaminated water. The unit is designed for cold water use only.
4.3 Electrical Connection
- Unwind the power cable completely.
- Plug the power cable into a suitable, grounded electrical outlet (230V, 50Hz).
- Ensure the power switch on the unit is in the "OFF" position before plugging in.
5. Operating Instructions
Learn how to effectively use your high-pressure cleaner for various cleaning tasks.
5.1 Starting the Unit and Priming
- Ensure water supply is connected and turned on.
- Hold the spray gun and press the trigger to release any air from the system. Allow water to flow through until a steady stream is achieved.
- Turn the main power switch on the unit to the "ON" position. The motor will start.
- Release the trigger on the spray gun; the motor will stop or run in bypass mode.
5.2 Using Accessories and Nozzles
The HCE2200 features a Quick Connect system for easy attachment changes.
- Vario Nozzle: Adjust the spray pattern from a concentrated jet to a wide fan by twisting the nozzle. Suitable for general cleaning.
- Dirt Blaster Nozzle: Provides a rotating jet for stubborn dirt and grime. Use with caution on delicate surfaces.
- Surface Cleaner: Ideal for cleaning patios, driveways, and large flat surfaces. Connect it to the spray gun and move it evenly over the surface.
- Wash Brushes: Use the rotating or fixed wash brush for gentle cleaning of vehicles or other surfaces, often in conjunction with detergent.
5.3 Using the Detergent Tank
- Fill the integrated detergent tank with a suitable pressure washer detergent.
- Attach the detergent nozzle or select the detergent setting on your Vario nozzle (if applicable).
- The detergent will be mixed with the water at low pressure. Apply detergent to the surface, allow it to soak, then rinse with high pressure.
5.4 Cleaning Applications

Figure 5.1: A user demonstrating the effective use of the Scheppach HCE2200 for washing a car. The high-pressure jet efficiently removes dirt and grime from vehicle surfaces.

Figure 5.2: This image shows the high-pressure cleaner being used with the patio cleaner attachment to clean a paved surface. This accessory ensures uniform cleaning and prevents splash-back.
- Car Washing: Use a wide fan spray or wash brush with detergent for initial cleaning, then rinse thoroughly with a medium pressure fan spray.
- Patio/Driveway Cleaning: Use the surface cleaner attachment for large areas. For stubborn spots, use the Dirt Blaster nozzle from a safe distance.
- General Cleaning: Adjust the Vario nozzle for various tasks like cleaning garden furniture, fences, or tools.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your high-pressure cleaner.
6.1 Cleaning the Unit
- After each use, disconnect power and water.
- Rinse the detergent tank with clean water if detergent was used.
- Clean the exterior of the unit with a damp cloth. Do not use harsh chemicals.
- Check the water inlet filter for debris and clean if necessary.
6.2 Storage
- Drain all water from the pump, hose, and spray gun before storing. Run the unit for a few seconds with the water supply off and trigger pressed to expel remaining water.
- Wind the high-pressure hose onto the integrated reel.
- Store accessories in their designated holders on the unit.
- Store the high-pressure cleaner in a dry, frost-free location.
6.3 Winter Storage (Frost Protection)
If storing in an area where temperatures may drop below freezing, it is crucial to protect the pump from frost damage.
- Completely drain all water from the unit as described above.
- Alternatively, circulate an anti-freeze solution (non-toxic, suitable for pumps) through the system. Consult a specialist if unsure.
7. Troubleshooting
This section addresses common issues you might encounter and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not start | No power supply; tripped circuit breaker; faulty switch. | Check power connection; reset circuit breaker; contact service if switch is faulty. |
| No pressure or low pressure | Insufficient water supply; air in pump; clogged nozzle; worn pump seals. | Ensure full water flow; prime pump (see Section 5.1); clean nozzle; contact service for pump issues. |
| Water leaks | Loose connections; damaged O-rings/seals. | Tighten all connections; replace damaged O-rings/seals. |
| Motor runs continuously | Air in pump; internal leak; bypass valve issue. | Prime pump; check for leaks; contact service. |
8. Specifications
Technical data for the Scheppach HCE2200 High-Pressure Cleaner.
| Specification | Value |
|---|---|
| Model Number | 5907702901 |
| Power Input | 2200 W |
| Voltage / Frequency | 230V / 50Hz |
| Max. Pressure | 165 bar |
| Rated Pressure | 110 bar |
| Max. Flow Rate | 468 liters per hour |
| Hose Length | 10 meters |
| Detergent Tank Volume | 1 Liter |
| Product Dimensions (L x W x H) | 38 x 28 x 82 cm (approx.) |
| Item Weight | 11.22 kg |
9. Warranty and Support
Scheppach products are manufactured to high quality standards. In the unlikely event of a defect, please refer to your purchase documentation for warranty terms and conditions. For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach website for contact information.
You can also visit the official Scheppach store on Amazon for more products and information: Scheppach Amazon Store





