1. Introduction
Thank you for choosing the JUMMICO Recliner Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new recliner. Please read these instructions carefully before use and retain them for future reference.
Figure 1.1: Recliner Chair Key Features. This image details the construction and comfort elements of the chair.
2. Safety Information
- Maximum Weight Capacity: The recliner is designed to support a maximum weight of 265 pounds (120 kg). Do not exceed this limit to prevent damage or injury.
- Stability: The steel frame footrest design enhances stability. Ensure the chair is placed on a flat, stable surface.
- Children and Pets: Keep children and pets away from the reclining mechanism to prevent pinching or injury.
- Movement: Do not move the chair while someone is seated in it or while the footrest is extended.
- Maintenance: Regularly inspect all bolts and connections to ensure they are tight.
3. Package Contents
Before assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Recliner Base (1)
- Backrest (1)
- Legs (4)
- Assembly Hardware (Screws for legs)
- Instruction Manual (This document)
4. Assembly Instructions
Assembly is straightforward and typically takes less than 10 minutes. No special tools are required.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
- Attach Legs: Locate the four legs. Screw each leg securely into the designated threaded holes on the bottom of the recliner base. Ensure they are tightened firmly.
- Connect Backrest: Align the metal brackets on the backrest with the corresponding slots on the recliner base. Slide the backrest down firmly until it clicks into place. Ensure both sides are securely engaged.
- Final Check: Gently rock the chair to ensure all connections are stable. Your recliner is now ready for use.
Figure 4.1: Recliner Chair Dimensions. This diagram illustrates the chair's measurements, including seat height, seat dimensions, and overall dimensions in both closed and open (reclined) states.
5. Operating Instructions
The JUMMICO Recliner Chair features an adjustable reclining mechanism for optimal comfort.
5.1 Reclining the Chair
- Initiate Recline: To recline, apply gentle pressure to the backrest while pushing back. The footrest will automatically extend.
- Adjust Angle: Continue to lean back to adjust the reclining angle between approximately 90° (upright) and 165° (fully reclined). The chair offers multiple comfortable positions.
- Return to Upright: To return to the upright position, lean forward and gently push the footrest down with your legs until it locks into place.
Figure 5.1: Adjustable Reclining Positions. This image demonstrates the chair's versatility with positions for resting (90°), watching TV (105°), and napping (120°).
5.2 Recommended Uses
- Reading: Adjust to a comfortable upright or slightly reclined position.
- Watching TV: Utilize the 105° position for optimal viewing comfort.
- Relaxing/Napping: Extend to the 120° or further reclined position for a restful experience.
6. Care and Maintenance
6.1 General Cleaning
- Fabric Care: The Aurora Grey Textile fabric is breathable and durable. For general cleaning, use a soft brush or vacuum cleaner with an upholstery attachment to remove dust and loose debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner diluted according to its instructions. Test on an inconspicuous area first. Avoid harsh chemicals.
- Pet Hair: Pet hair may cling to the fabric. Use a lint roller or a damp cloth to effectively remove it.
Figure 6.1: Comfortable Recliner Features. This image highlights the material properties contributing to the chair's comfort.
6.2 Structural Maintenance
- Hardware Check: Periodically check all screws and connections, especially the legs and backrest attachment points, to ensure they remain tight. Tighten if necessary.
- Mechanism Lubrication: If the reclining mechanism becomes stiff or noisy over time, a small amount of silicone-based lubricant can be applied to the moving parts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not recline smoothly. | Mechanism obstruction or lack of lubrication. | Check for any objects obstructing the mechanism. Apply silicone lubricant to moving parts if needed. |
| Footrest does not stay extended or retracts quickly. | Insufficient or uneven pressure applied during recline. | Ensure full and even pressure is applied to the backrest when reclining. The mechanism requires consistent pressure to hold certain positions. |
| Chair feels wobbly after assembly. | Loose leg screws or backrest connection. | Verify all four legs are securely tightened. Ensure the backrest is fully engaged and clicked into its slots. |
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | JUMMICO |
| Model Name | Recliner Chair |
| Item Model Number | SD24LR-87L4 |
| Color | Aurora Grey |
| Material Type | Textile (Fabric) with Sponge Fill |
| Product Dimensions (Closed) | 19.8" (W) x 28.8" (D) x 38.6" (H) |
| Product Dimensions (Open) | 19.8" (W) x 62.6" (D) x 29.8" (H) |
| Seat Dimensions | 19.8" (W) x 20.5" (D) |
| Seat Height | 17.7" |
| Back Dimensions | 20.9" (W) x 29.1" (H) |
| Maximum Weight Recommendation | 265 lbs (120 kg) |
| Reclining Positions | Adjustable from 90° to 165° (approx. 3 main positions) |
| Frame Material | Steel (for footrest mechanism) |
| Room Type | Living Room, Bedroom, Home Theater |
| Special Feature | Adjustable Recline |
| Item Weight | 56.1 pounds |
9. Customer Support
For any questions, concerns, or assistance with your JUMMICO Recliner Chair, please contact our customer support team. Refer to your purchase documentation for specific contact details or visit the official JUMMICO website.
Online Support: Visit the JUMMICO Store on Amazon