Product Overview
The Evenflo® Chase® Harnessed Booster is a versatile 2-in-1 combination booster car seat designed to accommodate children from 22 to 110 pounds. It seamlessly converts from a 5-point harnessed seat to a belt-positioning car seat, offering extended use as your child grows. Enhanced side walls and head support provide comfort and safety. The seat includes integrated cup holders and is designed for easy installation and transfer between vehicles.
Key Features:
- 2-in-1 Design: Converts from a 5-point harnessed seat to a belt-positioning booster for children 22-110 lbs.
- Upfront Harness Adjust: Central, front access to harness adjuster for an accurate, snug fit.
- Lightweight & Portable: Equipped for LATCH systems, allowing for easy installation and transfer between multiple vehicles.
- Adjustable Buckle Positions: Two crotch buckle positions to adapt as your child grows.
- Integrated Cup Holders: Keeps drinks accessible without increasing the car seat's width.
- No Assembly Required: Ready to use out of the box, except for minor cup holder attachment.
Front view of the Evenflo Chase Harnessed Booster in Jubilee color, showcasing its design and integrated cup holders.
Safety Information
The Evenflo Chase Harnessed Booster is designed with your child's safety as a priority. It has undergone rigorous testing to meet safety standards.
- Rollover Tested: This car seat has been tested for rollover protection.
- Side Impact Tested: Enhanced side walls and head support provide protection in side impact collisions.
- Forward-Facing Only: This car seat is designed for forward-facing use only. It is not suitable for rear-facing installation.
For detailed safety guidelines and complete installation instructions, please refer to the official PDF documents:
Setup
Attaching Cup Holders:
The Evenflo Chase Harnessed Booster comes with two integrated cup holders. To attach them, simply snap them into the designated slots on each side of the car seat. Once snapped in, secure them further by installing the small Phillips head screws provided into the bottom of the cup holders. This is the only assembly required for the car seat.
The Evenflo Chase Harnessed Booster with its two integrated cup holders securely attached.
Installation in Vehicle:
This car seat is equipped for LATCH systems, which allows for easy installation and transfer between multiple vehicles. Ensure the car seat is securely fastened using either the LATCH system or the vehicle's seat belt, following the detailed instructions in the user manual for proper fit and safety.
A child properly seated and secured in the Evenflo Chase Harnessed Booster within a vehicle.
Operating Instructions
Adjusting Harness Length:
The harness system can be easily adjusted to ensure a snug and secure fit for your child. Locate the central, front access harness adjuster. Press the release button and pull the harness straps to loosen, or pull the adjustment strap to tighten. This system is designed for quick and easy adjustments.
Close-up view of the 5-point harness system and central buckle on the Evenflo Chase Harnessed Booster.
Adjusting Crotch Buckle Positions:
The car seat features two crotch buckle positions, allowing you to adjust for more seating space as your child grows. Refer to the user manual for specific instructions on how to change the crotch buckle position to ensure optimal comfort and safety for your growing child.
Headrest Adjustment:
The innovative headrest design allows the vehicle belt to self-adjust to your child’s height when in booster mode. The headrest can also be manually adjusted to provide proper head and neck support for your child.
A hand demonstrating the adjustment of the headrest on the Evenflo Chase Harnessed Booster.
Maintenance
Cleaning Instructions:
- Plastic and Metal Parts: May be wiped clean with mild soap and water and dried with a soft cloth. Do not use abrasive cleaners or solvents.
- Harness: Can be wiped clean with mild soap and water. Allow harness to air dry.
- Seat Pad: Machine wash the seat pad separately in cold water. Tumble dry for 10 to 15 minutes on low heat.
- Buckle: Place the buckle in a cup of warm water and gently agitate. To avoid damage, do not clean the buckle with soap or detergents and do not use a lubricant.
Visual guide for cleaning the car seat fabric, including machine washing and spot cleaning.
Troubleshooting
If you encounter any issues with your Evenflo Chase Harnessed Booster, please refer to the comprehensive user manual for detailed troubleshooting steps. Many common issues can be resolved by ensuring correct installation and proper use according to the manual's guidelines. If problems persist, please contact Evenflo customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 18"D x 18.5"W x 29.5"H |
| Item Model Number | 30611847 |
| Minimum Weight Recommendation | 22 Pounds |
| Maximum Weight Recommendation | 110 Pounds |
| Minimum Height Recommendation | 28 Inches |
| Maximum Height Recommendation | 57 Inches |
| Material Type | Polyester, Fabric |
| Number of Items | 1 |
| Style | Harnessed Booster |
| Number of Reclining Positions | 4 |
| Harness Type | 5-Point |
| Item Weight | 9.14 Pounds |
Visual representation of the Evenflo Chase Harnessed Booster's dimensions.
Warranty and Support
Evenflo products are designed for durability and safety. For specific warranty information regarding your Evenflo Chase Harnessed Booster, please refer to the warranty section in the included user manual or visit the official Evenflo website. For any questions, concerns, or support needs, please contact Evenflo customer service.
Visit the Evenflo Store for more products and information.
