RL LIVE YOUR LIGHT Reality Leuchten R50511079 Taba Ceramic Table Lamp User Manual

1. Introduction

Thank you for purchasing the RL LIVE YOUR LIGHT Taba Table Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before installation and operation, and retain them for future reference.

The Taba Table Lamp features a distinctive gold ceramic base and a black fabric shade, designed to complement various interior styles. It is equipped with an E14 lamp holder, compatible with bulbs up to 40W.

2. Important Safety Instructions

• Always disconnect the lamp from the power supply before cleaning, changing the bulb, or performing any maintenance.
• This lamp is designed for indoor use only. Do not expose it to moisture or extreme temperatures.
• Ensure the voltage rating of the lamp matches your local power supply before connecting.
• Do not exceed the maximum wattage specified for the bulb (40W). Using a higher wattage bulb can cause overheating and damage.
• Keep the lamp away from flammable materials.
• Do not operate the lamp with a damaged cord or plug. If damaged, contact a qualified electrician for repair.
• Ensure the lamp is placed on a stable, flat surface to prevent tipping.
• Keep out of reach of children and pets.

3. Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact your retailer.

• 1 x Taba Table Lamp (Ceramic Base with Fabric Shade)
• 1 x Power Cord with Inline Switch
• Bulb not included

4. Setup and Assembly

The Taba Table Lamp comes pre-assembled. Follow these steps for initial setup:

1. Carefully remove the lamp from its packaging.
2. Place the lamp on a stable, flat surface where it will be used.
3. Insert an E14 bulb (max 40W) into the lamp holder by screwing it clockwise until secure.
4. Plug the power cord into a suitable electrical outlet.

This diagram provides detailed measurements of the lamp's height (330mm), shade diameter (230mm), and base dimensions, along with a schematic of the power cord (1200mm) and inline switch.

This image shows the assembled Taba table lamp, featuring its distinctive black fabric shade and a textured gold ceramic base.

5. Operating Instructions

The Taba Table Lamp is operated using the inline cord switch.

• To turn the lamp ON, locate the switch on the power cord and press the 'ON' position.
• To turn the lamp OFF, press the 'OFF' position on the same switch.

A close-up view of the Taba table lamp, highlighting the texture and finish of the gold ceramic base and the black fabric shade.

6. Care and Maintenance

Cleaning

• Always unplug the lamp before cleaning.
• Wipe the ceramic base with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Gently dust the fabric shade with a soft brush or a lint roller. Do not wet the shade.

Bulb Replacement

• Ensure the lamp is unplugged and the bulb has cooled down completely before attempting to replace it.
• Carefully unscrew the old E14 bulb counter-clockwise.
• Screw in a new E14 bulb (max 40W) clockwise until it is firmly seated.

7. Troubleshooting

8. Product Specifications

This image displays two Taba table lamps of different sizes on a wooden surface, illustrating their appearance in a home environment.

9. Warranty and Support

This product is covered by the standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or inquiries regarding your RL LIVE YOUR LIGHT Taba Table Lamp, please contact the customer service department of your retailer or the manufacturer directly.