Belmint Home Foot Spa Bath Massager User Manual

Introduction

The Belmint Home Foot Spa Bath Massager is designed to provide a comprehensive and relaxing foot spa experience in the comfort of your home. This all-in-one unit features water jets, bubble massaging, loofah discs for exfoliation, and a bath salt holder to enhance your relaxation. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Important Safety Information

To reduce the risk of electric shock, burns, fire, or injury, always follow these basic safety precautions:

• Do not use the massager while skin is wet or damaged.
• Limit usage time as recommended. Prolonged use may cause discomfort.
• Keep away from children. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• The manufacturer is not responsible for injuries caused by misuse.
• This massager does not heat water up. Always fill with water at your desired temperature.
• Always unplug the appliance from the electrical outlet immediately after using and before cleaning.
• Do not reach for an appliance that has fallen into water. Unplug it immediately.
• Do not use while bathing or in a shower.
• Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
• Never use pins or other metallic fasteners with this appliance.
• Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.
• Keep cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• To disconnect, turn all controls to the "OFF" position, then remove plug from outlet.

Product Overview and Components

The Belmint Foot Spa is designed with several features to provide a relaxing experience:

• 2 Exfoliating Loofah Discs: For gentle skin softening and rejuvenation.
• Salt/Herb Diffuser: A dedicated compartment for adding bath salts or herbs for aromatherapy.
• 2 Water Jets for Bubbles: Creates a soothing bubble massage.
• Shiatsu Massage Rollers: Manual rollers to invigorate your feet through stress-relieving massage.
• Infrared Light: Provides a soothing warmth and has antibacterial action.
• Power & Mode Switch: Easy-to-use knob for selecting desired functions.
• Wide Water Reservoir: Designed for comfortable foot immersion.

Image: Overview of the Belmint Foot Spa with key components labeled, including exfoliating loofahs, salt/herb diffuser, bubble jets, Shiatsu rollers, infrared light, and power switch.

Image: Visual representation of the foot spa's benefits: softening with loofah discs, relaxing with salt/herb diffuser, invigorating with Shiatsu rollers and bubbles, and disinfecting with infrared light.

Setup

1. Unpack: Carefully remove the foot spa from its packaging. Ensure all components are present, including the main unit, loofah discs, and any included accessories.
2. Placement: Place the foot spa on a flat, stable, and waterproof surface. Ensure it is near an electrical outlet and in a comfortable position for use.
3. Fill with Water: Fill the foot spa with hot or warm water to your desired comfort level. Do not overfill. The unit does not heat water, so ensure the water is at the temperature you prefer before starting.
4. Add Enhancements (Optional):
   • Place your favorite bath salts or herbs into the dedicated salt/herb diffuser.
   • Ensure the loofah discs are properly seated in their designated spots.
5. Connect Power: Plug the power cord into a standard electrical outlet.

Image: Contents of the box, showing the Belmint Foot Spa unit, power cord, and user manual, indicating what to expect upon unboxing.

Operating Instructions

The Belmint Foot Spa features a simple one-knob operation for ease of use:

1. Power On: Once the unit is filled with water and plugged in, turn the control knob to select your desired mode.
2. Mode Selection:
   • Position 0: Power Off.
   • Position 1: Activates Bubble Jets.
   • Position 2: Activates Infrared Light only.
   • Position 3: Activates both Bubble Jets and Infrared Light.
3. Foot Immersion: Gently place your feet into the foot spa.
4. Massage and Exfoliation:
   • Move your feet over the Shiatsu massage rollers for a deeper massage experience.
   • Gently rub your feet against the loofah discs for exfoliation.
5. Duration: Enjoy your foot spa session for a comfortable duration. It is recommended to limit sessions to 20-30 minutes.
6. Power Off: After use, turn the control knob back to Position 0 to power off the unit. Unplug the unit from the electrical outlet.

Image: Close-up of the control knob on the Belmint Foot Spa, illustrating the different settings: Power Off, Bubbles, Infrared Light, and Bubbles + Infrared Light.

Image: A person comfortably using the Belmint Foot Spa, demonstrating typical usage in a home environment.

Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and hygienic operation of your foot spa.

1. Drain Water: After each use, unplug the unit and carefully drain the water. The unit may have a built-in drain plug or spout for convenience.
2. Clean Interior: Wipe the interior of the foot spa with a soft cloth and mild soap. Rinse thoroughly with clean water.
3. Clean Loofah Discs: Remove the loofah discs and rinse them under running water. Allow them to air dry completely before reinserting or storing.
4. Exterior Cleaning: Wipe the exterior of the unit with a damp cloth. Do not immerse the unit in water.
5. Storage: Store the foot spa in a cool, dry place, away from direct sunlight and moisture. Ensure the unit is completely dry before storage.
6. Avoid Harsh Chemicals: Do not use abrasive cleaners, brushes, gasoline, kerosene, glass or furniture polish, or paint thinner to clean the foot spa.

Troubleshooting

If you encounter any issues with your Belmint Foot Spa, refer to the following common problems and solutions:

Specifications

Image: Diagram showing the dimensions of the Belmint Foot Spa, including length, width, and height measurements.

Warranty and Support

For information regarding warranty coverage, product support, or to purchase replacement parts, please refer to the warranty card included with your product or visit the official Belmint website. Contact information for customer service is typically provided in the product packaging.

You can also visit the Belmint Store on Amazon for more product information and support resources.