Introduction
This manual provides comprehensive instructions for the Master & Dynamic MW50+ Wireless Bluetooth Headphones. It covers product features, setup, operation, maintenance, and technical specifications to ensure optimal use of your device. Please read this manual thoroughly before using the headphones.
Package Contents
Verify that all items listed below are present in your package:
- MW50+ Headphones
- Interchangeable On-Ear Pads
- Interchangeable Over-Ear Pads
- Leather Ear Pad Case
- Canvas Headphone Pouch
- USB-C Charging Cable
- 1.25m Standard 3.5mm Audio Cable
Figure 1: Included accessories with the MW50+ Headphones.
Product Overview
The Master & Dynamic MW50+ headphones are designed for versatile audio experiences, offering both on-ear and over-ear configurations. They feature premium materials and advanced audio technology.
Figure 2: Front view of MW50+ Headphones.
Figure 3: Angled view of MW50+ Headphones.
Setup
Charging the Headphones
Before initial use, fully charge your MW50+ headphones. Connect the supplied USB-C charging cable to the headphone's charging port and to a USB power source. The LED indicator will show charging status.
Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the power button until the LED indicator flashes blue, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "MW50+" from the list of devices.
- Once connected, the LED indicator will turn solid blue.
Earpad Installation and Removal
The MW50+ headphones feature interchangeable ear pads, allowing you to switch between on-ear and over-ear styles. The ear pads attach magnetically.
- To remove an ear pad, gently pull it away from the earcup.
- To install an ear pad, align it with the earcup and allow the magnets to snap it into place. Ensure it is securely attached.
Video 1: Demonstrates the process of switching ear pads on the MW50+ headphones.
Figure 4: On-ear (left) and over-ear (right) pads.
Figure 5: Earpad removal process.
Operation
Controls
The MW50+ headphones feature intuitive controls located on the earcups:
- Power Button: Press and hold to power on/off. Press to check battery status.
- Volume Up/Down: Adjusts audio volume.
- Multi-function Button:
- Press once to Play/Pause audio or Answer/End calls.
- Press twice to skip to the next track.
- Press three times to go to the previous track.
- Press and hold to activate voice assistant.
Wearing the Headphones
Adjust the headband for a comfortable and secure fit. Ensure the earcups fully cover your ears (over-ear) or rest comfortably on your ears (on-ear) for optimal sound isolation and audio performance.
Maintenance
To maintain the performance and longevity of your MW50+ headphones:
- Clean the ear pads and headband with a soft, dry cloth.
- Avoid exposing the headphones to extreme temperatures, humidity, or liquids.
- Store the headphones in the provided canvas pouch or leather ear pad case when not in use.
- Do not attempt to disassemble or modify the headphones, as this will void the warranty.
Troubleshooting
| Problem | Solution |
|---|---|
| Headphones do not power on. | Ensure the headphones are charged. Connect to a power source using the USB-C cable. |
| Cannot pair via Bluetooth. | Ensure headphones are in pairing mode (flashing blue LED). Turn off and on Bluetooth on your device. Move closer to the device. |
| No sound or low volume. | Check volume levels on both headphones and connected device. Ensure headphones are properly paired. If using wired connection, ensure cable is fully inserted. |
| Sound quality is poor. | Ensure ear pads are correctly installed and sealed. Check for interference from other wireless devices. Try moving closer to the audio source. |
| Battery drains quickly. | Ensure headphones are fully charged. Reduce listening volume. Avoid extreme temperatures. |
Specifications
| Feature | Detail |
|---|---|
| Brand | MASTER & DYNAMIC |
| Model Number | MW50S1+ |
| Connectivity Technology | Bluetooth |
| Bluetooth Version | 5.0 |
| Bluetooth Range | 30 Meters |
| Ear Placement | Over Ear & On-Ear (Interchangeable) |
| Impedance | 32 Ohms |
| Noise Control | Sound Isolation |
| Battery Life | Up to 16 Hours |
| Audio Driver Type | Dynamic Driver |
| Frequency Response | 30000 Hz |
| Material | Leather (Premium grain cowhide, lambskin) |
| Weight | 0.21 Kilograms |
| Additional Features | Microphone Included, Media Control |
Warranty and Support
The Master & Dynamic MW50+ headphones come with a 1 Year Limited Warranty. For detailed warranty terms, service, or technical support, please visit the official Master & Dynamic website or contact their customer service department. Keep your proof of purchase for warranty claims.
For further assistance, you may visit the Master & Dynamic Brand Store.