1. Introduction
Thank you for choosing the DeWalt DPG780 Performance Mechanic Work Gloves. These gloves are designed to provide superior grip and protection for various mechanical and industrial tasks. This manual contains important information regarding the proper use, care, and maintenance of your gloves to ensure their longevity and your safety.
The DPG780 gloves feature impact guards to protect against incidental bumps and scrapes, while maintaining flexibility and comfort. They include a SecureFit wrist closure for a snug fit and tacky silicone fingertip grips for enhanced dexterity and control.
Figure 1: DeWalt DPG780 Performance Mechanic Work Gloves. These gloves are designed for durability and comfort in demanding work environments.
2. Getting Started
2.1 Sizing and Fit
The DeWalt DPG780 gloves are available in various sizes. Proper sizing is crucial for comfort, dexterity, and protection. Refer to the manufacturer's sizing guide, if available, to determine the correct size for your hands. A glove that is too large may compromise grip and safety, while a glove that is too small can restrict movement and cause discomfort.
2.2 Wearing the Gloves
- Slide your hand into the glove, ensuring each finger is fully seated in its respective slot.
- Adjust the glove to fit snugly around your hand.
- Secure the SecureFit wrist closure firmly but comfortably around your wrist. This helps prevent debris from entering the glove and ensures the glove stays in place during use.
3. Operating and Intended Use
The DeWalt DPG780 Performance Mechanic Work Gloves are designed for general mechanical and industrial tasks where hand protection, grip, and dexterity are required. They are suitable for:
- Automotive repair and maintenance
- Construction and general labor
- Assembly work
- Tool handling
The tacky Silicone fingertip grips enhance precision and control when handling small parts or tools. The impact guards provide protection against minor impacts and abrasions to the back of the hand.
Important: These gloves are not designed for protection against extreme heat, open flames, sharp blades, or hazardous chemicals. Always assess the specific risks of your task and choose appropriate personal protective equipment (PPE).
4. Maintenance and Care
Proper care will extend the life of your DeWalt DPG780 gloves.
4.1 Cleaning Instructions
- Hand Wash Only: Wash the gloves by hand using mild soap and cool water.
- Gently scrub away dirt and grime.
- Rinse thoroughly to remove all soap residue.
- Do not use bleach or harsh detergents, as these can damage the fabric and protective coatings.
4.2 Drying and Storage
- Air dry the gloves away from direct heat or sunlight. Do not tumble dry.
- Ensure gloves are completely dry before storing to prevent mildew.
- Store in a cool, dry place, away from direct sunlight and extreme temperatures.
5. Troubleshooting
While the DeWalt DPG780 gloves are built for durability, wear and tear can occur. Here are some common issues and advice:
5.1 Seam Separation
If seams begin to separate, it may indicate excessive stress or normal wear over time. For minor separations, a durable fabric adhesive might offer a temporary repair. For significant damage, replacement is recommended to maintain protection.
5.2 Reduced Grip
If the silicone grips lose their tackiness, ensure the gloves are clean and free of oil or grease residue. Thoroughly hand wash as per Section 4.1. If grip remains compromised after cleaning, the gloves may be nearing the end of their useful life.
5.3 General Wear and Tear
Inspect your gloves regularly for signs of damage, such as holes, tears, or thinning material. Damaged gloves may not provide adequate protection and should be replaced promptly.
6. Specifications
| Feature | Detail |
|---|---|
| Model | DPG780 |
| Fabric Type | 100% Nylon |
| Care Instructions | Hand Wash |
| Origin | Made in the USA or Imported |
| Key Features | Impact Guards, SecureFit Wrist Closure, Tacky Silicone Fingertip Grips |
7. Warranty Information
Specific warranty details for the DeWalt DPG780 Performance Mechanic Work Gloves are typically provided by the manufacturer or the retailer at the time of purchase. Please retain your proof of purchase for any warranty claims. For the most accurate and up-to-date warranty information, please refer to the documentation included with your product or contact DeWalt customer service directly.
8. Support
If you have any questions regarding the DeWalt DPG780 Performance Mechanic Work Gloves, or require assistance, please contact the retailer from whom you purchased the product. Alternatively, you may visit the official DeWalt website for customer support resources and contact information.