PHI VILLA RANKSL1407H-OMBAFE

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

PHI VILLA Swivel Patio Chairs Instruction Manual

Model: RANKSL1407H-OMBAFE

1. Important Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

Regularly check the stability of the chairs. Tighten screws if they become loose.
Do not use the chairs during thunderstorms or lightning conditions.
Keep the chairs away from open flames or direct heat sources.
Avoid exposing the chairs to extreme temperatures or direct sunlight for extended periods to prevent material degradation.
Ensure the chairs are placed on a stable, level surface before use.
Do not exceed the maximum weight capacity of 300 lbs.

2. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

Chair Frames (2 sets)
Seat Cushions (2)
Hardware Pack (bolts, washers, nuts, Allen wrench)
Instruction Manual

3. Setup and Assembly Instructions

Assembly typically requires two people. Do not fully tighten bolts until all components are loosely assembled.

Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches. Identify all components against the package contents list.
Attach Chair Back to Seat Frame: Align the chair back with the seat frame. Insert bolts through the designated holes and loosely secure with washers and nuts.
Attach Armrests: Connect the armrests to both the chair back and the seat frame. Insert bolts and loosely secure. Ensure the curved armrest design is facing the correct direction.
Assemble Swivel Base: Attach the swivel mechanism to the bottom of the seat frame. Then, connect the circular base to the swivel mechanism. Ensure the 3 steel frame bottom brackets are correctly aligned for stability. Loosely secure all bolts.
Final Tightening: Once all components are loosely assembled, place the chair upright on a flat surface. Gradually tighten all bolts evenly using the provided Allen wrench. Do not overtighten.
Place Cushions: Position the padded cushions onto the chair seats. The cushions are designed to be water-resistant.

Two assembled PHI VILLA swivel patio chairs with wooden armrests and beige cushions.

Figure 3.1: Fully assembled PHI VILLA Swivel Patio Chairs.

Diagram showing steps for assembling the chair frame components.

Figure 3.2: Assembly diagram illustrating the connection of chair components.

Diagram detailing the attachment of the swivel base to the chair seat.

Figure 3.3: Detailed view of swivel base attachment.

4. Operating Instructions

The PHI VILLA Swivel Patio Chairs are designed for comfortable outdoor seating with a smooth 360-degree rotation feature.

Swivel Function: The chair seat is designed to rotate smoothly 360 degrees. To swivel, simply apply gentle pressure with your feet or body in the desired direction.
Rocker Function: The chair also features a gentle rocking motion. Lean back slightly to engage the rocking mechanism.
Seating: Sit centrally on the cushion to ensure even weight distribution and optimal comfort.

Two PHI VILLA swivel chairs demonstrating 360-degree rotation with green arrows.

Figure 4.1: Illustration of the 360-degree swivel capability.

5. Maintenance and Care

Proper maintenance will extend the life and appearance of your patio chairs.

Cleaning: Wipe the chair frames with a damp cloth and mild soap. Rinse thoroughly with clean water and dry completely to prevent water spots and rust. The cushions can be spot cleaned with a mild detergent and water.
Rust Prevention: The steel frame features a rust-resistant powder coating. However, regular inspection for scratches or chips in the coating is recommended. Touch up any damaged areas to prevent rust.
Cushion Care: While water-resistant, it is recommended to store cushions indoors during heavy rain or prolonged periods of non-use to maintain their quality and prolong their lifespan.
Storage: During off-season or extended periods of non-use, store the chairs in a dry, covered area to protect them from harsh weather conditions.
Stability Check: Periodically check all bolts and connections to ensure they remain tight. Tighten as necessary.

Diagram illustrating the multi-layer powder E-coating process for rust resistance.

Figure 5.1: Explanation of the powder E-coating frame for durability.

6. Troubleshooting

If you encounter any issues with your PHI VILLA Swivel Patio Chairs, refer to the following common problems and solutions.

Problem	Possible Cause	Solution
Chair feels wobbly or unstable.	Loose bolts or uneven surface.	Ensure all bolts are securely tightened. Move the chair to a flat, level surface.
Swivel mechanism is stiff or noisy.	Lack of lubrication or debris in the mechanism.	Apply a silicone-based lubricant to the swivel mechanism. Clean any visible debris.
Rust spots appear on the frame.	Damage to the powder coating, prolonged exposure to moisture.	Clean the rust spots with a wire brush, apply rust-inhibiting primer, and touch-up paint. Store in a dry area.
Cushions retain water or become moldy.	Prolonged exposure to rain or humidity.	Ensure cushions are thoroughly dried after rain. Store indoors during wet weather. Clean mold with a diluted bleach solution (test in an inconspicuous area first).

7. Specifications

Detailed specifications for the PHI VILLA Swivel Patio Chairs.

Brand: PHI VILLA
Model Name: Swivel
Model Number: RANKSL1407H-OMBAFE
Product Dimensions: 22"D x 22"W x 35"H (Overall)
Seat Depth: 25 inches
Maximum Weight Recommendation: 300 Pounds
Material: Steel frame with powder coating, Foam fill material (cushions)
Color: Wooden Armrest Design (Black frame with beige cushions and wooden armrest accents)
Special Feature: 360-degree Swivel, Rocker Function, Ergonomic Design, Rust-resistant
Indoor/Outdoor Usage: Outdoor
Unit Count: 2.0 Count (Set of 2 chairs)
UPC: 720355876326

Diagram showing the dimensions of the PHI VILLA swivel patio chair, including height, seat width, and seat depth.

Figure 7.1: Key dimensions of the swivel patio chair.

8. Warranty and Support

For warranty information or customer support regarding your PHI VILLA Swivel Patio Chairs, please refer to the documentation included with your purchase or contact PHI VILLA customer service directly. Contact details can typically be found on the manufacturer's website or on your purchase receipt.

When contacting support, please have your model number (RANKSL1407H-OMBAFE) and proof of purchase readily available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.