POWRUI Surge Protector & USB Wall Charger User Manual

Introduction

Thank you for choosing the POWRUI Surge Protector, USB Wall Charger. This multi-functional device expands a single wall outlet into 6 AC outlets and 2 smart USB charging ports, allowing you to power and charge up to 8 devices simultaneously. It features built-in surge protection to safeguard your electronic devices from electrical spikes. This manual provides essential information for safe and efficient use of your new surge protector.

Image: Front view of the POWRUI Surge Protector, showcasing its 6 AC outlets and 2 USB charging ports.

Safety Information

• Do not exceed the maximum power rating of 15A/1875W.
• Avoid using in wet or damp environments.
• Do not disassemble or modify the device.
• Keep out of reach of children.
• Ensure the device is properly plugged into a grounded outlet.

Setup

1. Prepare the Wall Outlet: For a secure and flush fit, it is recommended to remove the center screw from your existing wall outlet's faceplate.
2. Plug in the Surge Protector: Align the prongs on the back of the POWRUI Surge Protector with the bottom outlet of your standard wall receptacle. Insert firmly.
3. Secure the Device: Use the provided screw to secure the surge protector to the wall outlet's center screw hole. Tighten until snug, but do not overtighten.
4. Verify Power: Once plugged in and secured, the "Protected" indicator LED light on the bottom of the unit will illuminate green, indicating that your devices are protected against electrical spikes and the unit is functioning correctly.

Image: Back view of the surge protector, illustrating the prongs and the central screw for secure wall mounting. It also shows compatibility with duplex and decor outlets.

Image: Diagram showing the dimensions of the POWRUI Surge Protector (3.74" x 1.30" x 5.11").

Operating Instructions

Using AC Outlets

The surge protector provides 6 standard AC outlets. Simply plug your electronic devices into any available outlet. The wide-spaced design accommodates larger power adapters without blocking adjacent outlets.

Using USB Charging Ports

The two smart USB charging ports (total output DC 5V/2.4A) automatically detect your connected devices and deliver optimal charging speed. Connect your smartphones, tablets, or other USB-powered devices using their respective USB cables.

Phone Holder Feature

A convenient top phone holder is integrated into the design, allowing you to place your cell phone securely on top of the unit while it charges, keeping it off the floor or counter.

Image: Diagram highlighting key features: 2 USB ports, 6 AC outlets, 1680 Joules surge protection, Smart USB Port (2.4A shared), Safe Fireproof Shell, Wide Spaced AC Outlets (15A/1875W), Multiple Outlets, and ETL approval.

Image: The surge protector mounted on a wall, charging a phone placed on its top holder, and other devices plugged into its outlets. Text indicates it can charge 8 devices simultaneously and has a convenient cradle ledge.

Image: An exploded view of the surge protector showing its internal components, specifically highlighting the TVS (Transient Voltage Suppressor), MOV (Metal Oxide Varistor), and GDT (Gas Discharge Tube) for surge protection, along with the lightning protection indicator light.

Image: The surge protector surrounded by various electronic devices (phone, tablet, laptop, game console, vacuum cleaner, refrigerator, microwave, computer monitor), illustrating its broad compatibility for charging and powering.

Maintenance

• Keep the surge protector clean and free of dust. Use a dry, soft cloth for cleaning.
• Do not use liquid cleaners or aerosol sprays directly on the unit.
• Ensure no foreign objects enter the outlets or USB ports.

Troubleshooting

No Power to Devices

• Check if the surge protector is firmly plugged into the wall outlet.
• Verify that the wall outlet itself is receiving power by testing it with another device.
• Ensure the total power consumption of connected devices does not exceed 1875W.

"Protected" Indicator Light is Off

• If the green "Protected" LED light is off, it indicates that the surge protection components have been consumed or damaged by a power surge. The unit may still provide power, but it will no longer offer surge protection.
• In this case, it is recommended to replace the surge protector to ensure continued protection for your devices.

Specifications

Warranty & Support

POWRUI products are ETL Certified and come with a 30-day return policy and a 12-month warranty. Our friendly and reliable customer service team is available to respond to your inquiries within 24 hours.

For support or warranty claims, please contact POWRUI customer service through the retailer's platform or visit the official POWRUI website for contact information.