1. Introduction
Thank you for choosing the LEDMO 200W LED Parking Lot Light. This high-performance outdoor lighting fixture is designed for commercial and industrial applications, providing powerful and efficient illumination. Featuring a dusk-to-dawn photocell, durable construction, and 26000 lumens of 5000K daylight white light, this fixture is ideal for parking lots, streets, courts, and other large outdoor areas. Please read this manual thoroughly before installation and operation to ensure safe and proper use.
Figure 1: LEDMO 200W LED Parking Lot Light with included Allen wrench.
2. Safety Information
WARNING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
- Disconnect power at the circuit breaker before installation or servicing.
- Ensure the supply voltage is compatible with the fixture (100-277V AC).
- Do not handle live wires.
- Ensure all connections are secure and properly insulated.
- Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
- Do not modify the fixture in any way.
- Keep flammable materials away from the light fixture.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- LED Parking Lot Light Fixture
- Photocell Sensor (pre-installed or included separately)
- Allen Wrench (for adjustment)
- Installation Manual
4. Specifications
| Specification | Value |
|---|---|
| Wattage | 200W |
| Lumen Output | 26000 Lumens |
| Color Temperature | 5000K Daylight White |
| Input Voltage | 100-277V AC |
| IP Rating | IP65 Waterproof |
| Beam Angle | 80-150° |
| LED Type | Lumileds 3030 SMD |
| Material | Die-casting Aluminum, ABS Industrial Plastics |
| Operating Temperature | -30°C to 50°C |
| Average Life | 50,000 Hours |
| Mounting Type | Slip-fitter (Pole Mount) |
Figure 2: Detailed Product Information.
5. Installation Instructions
This fixture is designed for pole mounting using a slip-fitter arm. Ensure the mounting pole is sturdy enough to support the weight of the fixture (approximately 12.54 lbs).
5.1 Wiring
- Turn off power: Before starting, ensure the power supply to the installation area is completely disconnected at the circuit breaker.
- Connect wires: Connect the fixture's wires to the main power supply wires as follows:
- Black wire (L) to Live wire
- White wire (N) to Neutral wire
- Yellow-green wire to Ground wire
5.2 Mounting
- Attach to pole: Slide the slip-fitter bracket onto the pole. The slip-fitter is designed to fit standard pole sizes.
- Adjust direction: Loosen the adjustment bolts on the slip-fitter arm. Adjust the lamp head to the desired direction and angle (up to 180 degrees rotation is possible).
- Secure fixture: Tighten the adjustment bolts firmly to secure the fixture in place. Ensure all four screws on the side of the slip-fitter are tightened to prevent movement.
Figure 3: Installation Steps.
Figure 4: Adjustable Mounting Angle.
6. Operating Instructions
The LEDMO 200W LED Parking Lot Light is equipped with a dusk-to-dawn photocell sensor for automatic operation.
- Automatic Operation: The photocell sensor detects ambient light levels. The light will automatically turn ON when it gets dark and turn OFF when it gets light.
- Manual Override (Optional): If you wish to disable the dusk-to-dawn function and control the light manually via a switch, you can cover the photocell sensor with opaque black tape. This will cause the light to remain on whenever power is supplied to the fixture.
Figure 5: Photocell Sensor Details.
Figure 6: Photocell Replacement and Manual Override.
7. Maintenance
The LEDMO 200W LED Parking Lot Light is designed for minimal maintenance.
- Cleaning: Periodically clean the lens and housing with a soft, damp cloth to remove dirt and debris that may accumulate and affect light output or photocell performance. Do not use abrasive cleaners or solvents.
- Photocell Replacement: If the photocell sensor malfunctions, it can be easily replaced. Simply twist to remove the old photocell and twist in a new compatible one. Ensure power is disconnected before attempting replacement.
- Heat Dissipation: The hollow heat sink design helps maintain optimal operating temperature. Ensure no obstructions block the heat sink fins.
Figure 7: Efficient Heat Dissipation and IP65 Rating.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn ON | No power supply Faulty wiring Photocell malfunction Insufficient darkness | Check circuit breaker and power connections. Verify wiring connections are correct and secure. Test or replace photocell sensor. Ensure photocell is not obstructed and ambient light is low enough. |
| Light flickers | Unstable power supply Loose wiring connection Internal component issue | Consult an electrician to check power stability. Inspect and secure all wiring connections. Contact customer support if problem persists after checking power and wiring. |
| Light stays ON during daytime | Photocell obstructed Photocell malfunction | Remove any obstructions from the photocell sensor. Test or replace photocell sensor. |
9. Warranty and Support
The LEDMO 200W LED Parking Lot Light comes with a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact LEDMO customer service. Please have your model number (295) and proof of purchase available when contacting support.
Contact Information: Please refer to the seller's contact information on your purchase platform or visit the official LEDMO website for support details.