Feit Electric LED PAR30 Light Bulb Instruction Manual

Introduction

This manual provides essential information for the safe and efficient use of your Feit Electric LED PAR30 Dimmable Light Bulb. Designed for energy efficiency and long life, this bulb offers bright, warm white light suitable for various indoor applications. Please read these instructions carefully before installation and retain them for future reference.

Image 1: Front view of the Feit Electric PAR30 LED Light Bulb, showcasing its long neck and standard E26 base.

Setup and Installation

1. Safety First: Before attempting any installation, ensure the power to the fixture is turned OFF at the circuit breaker or fuse box.
2. Remove Old Bulb: Allow the old bulb to cool completely before carefully unscrewing it from the fixture. Dispose of the old bulb according to local regulations.
3. Install New Bulb: Carefully screw the Feit Electric PAR30 LED bulb into the standard E26 medium screw base socket. Do not overtighten.
4. Restore Power: Once the bulb is securely installed, restore power to the fixture at the circuit breaker or fuse box.
5. Test: Turn on the light switch to confirm proper operation.

This bulb is designed for indoor use and is compatible with most standard dimmers. For best dimming performance, ensure your dimmer is LED compatible.

Image 2: Packaging of the Feit Electric PAR30 LED Light Bulb, highlighting key features such as 75W equivalent, 8.3W actual usage, 750 lumens, 3000K warm white, and 25,000-hour lifespan.

Operating Instructions

• Power On/Off: Operate the bulb using a standard wall switch connected to the fixture.
• Dimmable Functionality: This LED bulb is dimmable. When connected to a compatible dimmer switch, you can adjust the light output from full brightness down to a lower level. Ensure your dimmer is designed for LED lighting to prevent flickering or poor performance.
• Instant On: The bulb provides instant full brightness with no warm-up time required.

Maintenance

• Cleaning: Ensure the power is OFF before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• Replacement: Due to the long lifespan of LED bulbs, frequent replacement is not typically necessary. When replacement is required, follow the installation steps outlined above.

Troubleshooting

• Bulb Does Not Light Up:
  • Check that the power is ON at the wall switch and circuit breaker.
  • Ensure the bulb is screwed in securely into the socket.
  • Verify that the fixture itself is working by testing with another known-good bulb.
• Bulb Flickers or Dims Incorrectly:
  • This often indicates incompatibility with your dimmer switch. Ensure your dimmer is specifically designed for LED lighting.
  • Try the bulb in a non-dimmable fixture to confirm the bulb is functioning correctly.
• Light Output is Too Low/High:
  • If using a dimmer, adjust the dimmer setting.
  • Confirm the bulb's specifications (lumens, color temperature) match your desired lighting needs.

Specifications

Warranty and Support

For detailed warranty information, please refer to the documentation included with your purchase or visit the official Feit Electric website. Feit Electric stands behind the quality of its products.

If you require technical assistance or have questions not covered in this manual, please contact Feit Electric customer support. You can typically find contact information on the product packaging or on the Feit Electric website: www.feit.com.