Product Overview
The Fricosmos 061466 Sink is a freestanding stainless steel unit designed for efficient handwashing. It features a large capacity basin with integrated splash guards and an overflow system. This model is activated by electronic foot impulses, allowing for hands-free operation. It includes all necessary accessories for installation and offers real-time temperature regulation.

Image: Fricosmos 061466 Sink, showing the stainless steel unit with a faucet, basin, and foot pedals for activation.
Setup and Installation
The Fricosmos 061466 Sink is designed for freestanding installation. While it does not require a direct water inlet or outlet connection, it necessitates a high-power electrical outlet for operation.
Pre-Installation Checklist:
- Ensure a stable, level surface for placement.
- Verify the availability of a high-power electrical outlet (230V, 4400W, 50Hz) within reach of the unit's power cord.
- Unpack all components and verify against the included accessories list.
Installation Steps:
- Carefully place the sink unit in its desired location, ensuring it is level and stable.
- Connect the power cord to the high-power electrical outlet.
- Fill the internal water reservoir.
- Perform an initial test run to check for proper operation and water flow.
Operating Instructions
The Fricosmos 061466 Sink is designed for simple, hygienic operation via foot pedals.
Basic Operation:
- To activate water flow, gently press one of the foot pedals located at the base of the unit.
- The unit features electronic foot impulses for activation.
- Release the foot pedal to stop the water flow.
Temperature Regulation:
This unit allows for real-time temperature regulation. Specific controls for temperature adjustment are integrated into the system. Refer to the visual indicators or specific controls on the unit for precise temperature setting.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Fricosmos 061466 Sink.
Cleaning:
- The manufacturer recommends handwashing for care instructions.
- Clean the stainless steel surfaces with a soft cloth and a mild, non-abrasive cleaner.
- Avoid using harsh chemicals or abrasive pads that could scratch the finish.
- Regularly clean the basin and overflow area to prevent buildup.
Water Reservoir Management:
- Periodically check and refill the internal water reservoir as needed.
- For optimal hygiene, consider draining and cleaning the reservoir at regular intervals, especially if the unit is not in frequent use.
Troubleshooting
This section provides solutions to common issues you might encounter with your Fricosmos 061466 Sink.
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow when foot pedal is pressed. | Unit not powered; internal water reservoir empty; electrical issue. | Ensure unit is plugged into a high-power electrical outlet. Check if the reservoir needs refilling. Verify power supply. |
| Water temperature is incorrect. | Temperature settings are not adjusted correctly. | Adjust the temperature controls on the unit. Allow time for water to heat/cool. |
| Slow drainage or basin fills up. | Drainage system is clogged. | Clear any debris from the basin drain and overflow. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 061466 |
| Brand | Fricosmos |
| Dimensions (L x W x H) | 45 x 45 x 85 cm |
| Weight | 20.5 kg |
| Material | Stainless Steel |
| Installation Method | Freestanding |
| Power | 4400 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Maximum Temperature | 50°C |
| Flow Rate | 3.8 L/min |
| Finish | Brushed |
| Shape | Rectangular |
| Drain Type | Grid |
| Care Instructions | Handwash |
Warranty Information
Specific warranty details for the Fricosmos 061466 Sink are not provided in the product information. Please refer to your purchase documentation or contact the retailer for warranty terms and conditions.
Customer Support
For further assistance, technical support, or inquiries regarding your Fricosmos 061466 Sink, please contact your point of purchase or refer to the manufacturer's official website for contact information.





