Introduction
Thank you for choosing the Feit Electric BR40 Dimmable LED Floodlight. This energy-efficient LED bulb is designed to replace traditional 75-watt incandescent floodlights, consuming only 11.8 watts while providing 1065 lumens of soft white 2700K light. It is suitable for various indoor applications, including track lighting and recessed fixtures, offering a wide 110-degree beam spread. With a lifespan of up to 15,000 hours, this ENERGY STAR qualified bulb is built for long-lasting performance and significant energy savings.
Image: Front view of the Feit Electric BR40 Dimmable LED Floodlight 2-pack packaging, highlighting its LED, dimmable, flood, 1065 lumens, 11.8 watts, 15,000 life hours, and 75W replacement features.
Safety Information
WARNING:
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications.
- Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
CAUTION:
- Use only on 120 volt, 60Hz circuits.
- Suitable for damp locations.
- Minimum operating temperature: -25°C (-13°F).
- This device is not intended for use with emergency exit fixtures or emergency lights.
- Lamp may not be compatible with all dimmers. For dimmer compatibility information, visit www.feit.com or call 1-866-329-BULB.
- When installing or replacing, ensure that power is switched off at the circuit breaker before connecting or disconnecting to the fixture.
Image: Back view of the Feit Electric BR40 Dimmable LED Floodlight packaging, showing detailed specifications, warranty information, and safety warnings.
Setup and Installation
- Power Off: Before beginning installation, ensure the power to the light fixture is switched off at the circuit breaker to prevent electrical shock.
- Remove Old Bulb: Carefully unscrew and remove the existing bulb from the fixture. Allow the old bulb to cool if it has been recently in use.
- Install New LED Bulb: Screw the Feit Electric BR40 Dimmable LED Floodlight into the standard E26 medium screw base socket until it is finger-tight. Do not overtighten.
- Restore Power: Once the bulb is securely installed, restore power at the circuit breaker.
- Application: This BR40 floodlight is designed for track lighting and recessed applications, providing a wide beam of light.
Image: Side view of the Feit Electric BR40 Dimmable LED Floodlight packaging, illustrating its wide light distribution and suitability for track and recessed applications.
Operating Instructions
The Feit Electric BR40 LED Floodlight is designed for simple operation in compatible fixtures.
- Standard Operation: Once installed and power is restored, the bulb will illuminate when the light switch is turned on.
- Dimmable Functionality: This LED bulb is dimmable. For optimal performance and to avoid flickering or buzzing, use with LED-compatible dimmer switches. If you experience issues with your current dimmer, consult www.feit.com for a list of compatible dimmers or contact customer support.
- Indoor Use: This bulb is intended for indoor use in dry or damp locations.
Maintenance
Feit Electric LED bulbs require minimal maintenance due to their long lifespan and durable design.
- Cleaning: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: Replace the bulb only after it has cooled down completely.
- Disposal: Dispose of LED bulbs according to local regulations for electronic waste.
Troubleshooting
If you encounter issues with your Feit Electric BR40 LED Floodlight, consider the following:
- Bulb Not Lighting Up:
- Ensure the bulb is screwed in securely into the socket.
- Check if the power switch is on and the circuit breaker has not tripped.
- Test the bulb in a different, known-working fixture.
- Flickering or Buzzing:
- This often indicates incompatibility with the dimmer switch. Ensure you are using an LED-compatible dimmer.
- Visit www.feit.com for a list of recommended dimmers or contact customer support.
- Radio or TV Interference:
- If the bulb causes interference, try reorienting or relocating the receiving antenna.
- Increase the separation between the light fixture and the affected receiver.
- Connect the light fixture to an outlet on a different circuit from the receiver.
- Consult a dealer or an experienced radio/TV technician for further assistance.
Specifications
| Feature | Specification |
|---|---|
| Model Number | CEBR40/927K/LED/2 |
| Light Type | LED |
| Bulb Shape Size | BR40 (Reflector) |
| Bulb Base | E26 (Medium Screw Base) |
| Wattage (Actual) | 11.8 Watts |
| Incandescent Equivalent | 75 Watts |
| Brightness | 1065 Lumens |
| Light Color | Soft White |
| Color Temperature | 2700 Kelvin |
| Color Rendering Index (CRI) | 80 |
| Beam Angle | 110° (Wide Beam) |
| Dimmable | Yes |
| Voltage | 110 Volts |
| Operating Life | 15,000 Hours |
| Indoor/Outdoor Usage | Indoor (Suitable for damp locations) |
| Estimated Yearly Energy Cost | $1.42 (Based on 3 hrs/day) |
| UPC | 017801459401 |
Warranty and Support
Warranty: This Feit Electric LED lamp comes with a 5-year, free replacement warranty. If the product fails or you are not satisfied with its performance, please contact Feit Electric directly. This replacement is the sole remedy available, and liability for incidental or consequential damage is expressly excluded.
Contact Information:
- Website: www.feit.com
- Email: info@feit.com
- Toll-Free Number: 1-866-329-BULB (1-866-329-2852)
Manufacturer:
Feit Electric Company
Pico Rivera, CA 90660
Made in China
