1. Introduction
Thank you for choosing the OLEVS Men's Ultra-Thin Quartz Analog Watch, Model XLY-S-G5869PSZ-MB. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
2. Product Overview
The OLEVS Men's Watch is designed with a minimalist aesthetic, featuring an ultra-thin profile and a clear analog display. It incorporates a reliable quartz movement for accurate timekeeping and includes a date display function. The watch is fitted with a comfortable leather strap and offers 30-meter water resistance for daily use.

Figure 2.1: OLEVS Men's Ultra-Thin Quartz Analog Watch (Brown belt, rose shell, white mirror variant).

Figure 2.2: The ultra-thin design of the watch, measuring 6.5mm in thickness.

Figure 2.3: Detailed product dimensions for the OLEVS watch.
3. Setup
- Unpacking: Carefully remove the watch from its packaging. Inspect for any visible damage.
- Crown Protector: If present, gently remove any plastic protector from under the crown (the small knob on the side of the watch case).
- Initial Time Setting: Pull the crown out to the furthest position. Rotate the crown to set the correct time. Push the crown back in to start the watch movement.
- Strap Adjustment: Adjust the leather strap to fit comfortably on your wrist. Ensure it is not too tight or too loose.
4. Operating Instructions
4.1 Setting the Time
- Pull the crown out to the second click position (furthest out).
- Rotate the crown clockwise or counter-clockwise to move the hour and minute hands to the desired time.
- Once the time is set, push the crown back into its normal position (first click) to engage the movement.
4.2 Setting the Date
- Pull the crown out to the first click position (halfway out).
- Rotate the crown clockwise or counter-clockwise (depending on the specific movement) to adjust the date.
- Once the date is set, push the crown back into its normal position.
Note: Avoid setting the date between 9:00 PM and 3:00 AM, as this can interfere with the automatic date change mechanism and potentially damage the movement.
5. Maintenance
- Cleaning: Wipe the watch case and strap regularly with a soft, dry cloth to remove dust and dirt. For the leather strap, avoid excessive moisture.
- Water Exposure: While the watch is water-resistant, avoid prolonged exposure to water, hot water, or steam. Always ensure the crown is fully pushed in before any contact with water.
- Temperature: Avoid exposing the watch to extreme temperatures (hot or cold) or sudden temperature changes, as this can affect the movement and battery life.
- Chemicals: Keep the watch away from chemicals, solvents, and detergents, which can damage the case, strap, or seals.
- Battery Replacement: The quartz movement is powered by a battery. When the watch stops running, it indicates the battery needs replacement. This should be performed by a qualified watch technician to ensure proper sealing and function.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch stops running | Depleted battery | Replace the battery (professional service recommended). |
| Date does not change | Incorrect date setting time; Crown not fully pushed in | Avoid setting date between 9 PM and 3 AM. Ensure crown is fully pushed in. Re-set the date. |
| Condensation under crystal | Exposure to extreme temperature changes or moisture ingress | Seek professional service immediately to prevent damage to the movement. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | OLEVS |
| Model Number | XLY-S-G5869PSZ-MB |
| Movement Type | Quartz Analog |
| Case Material | Alloy |
| Strap Material | Leather (Cowhide) |
| Dial Diameter | 40 mm (1.57 inches) |
| Case Thickness | 6.5 mm (0.26 inches) |
| Strap Width | 20 mm (0.78 inches) |
| Total Length | 23 cm (9.06 inches) |
| Clasp Type | Buckle |
| Water Resistance | 30 Meters (3ATM) |
| Functions | Time, Date Display |
8. Water Resistance Guidelines
This OLEVS watch is rated for 30 meters (3ATM) of water resistance. This means it is suitable for daily use and can withstand splashes, rain, and brief immersion in water, such as during hand washing or dishwashing. It is not suitable for showering, bathing, swimming, diving, or any water-related activities where it would be submerged for extended periods or exposed to high-pressure water.
- Do not operate the crown or pushers when the watch is wet or submerged.
- Ensure the crown is always fully pushed in to maintain water resistance.
- Avoid exposing the watch to hot water or steam, as this can compromise the seals.

Figure 8.1: Water resistance demonstration for daily activities.
9. Product Video
Watch this video for a closer look at the OLEVS watch and its features.
Video 9.1: A detailed demonstration of the OLEVS watch, showcasing its design, features, and wearability.
10. Warranty and Support
OLEVS is committed to providing quality products. If you encounter any difficulties or have questions regarding your watch, please consult the manufacturer, XIN LINGYU. They are dedicated to providing effective and satisfactory solutions to your inquiries.
For further assistance, please refer to the contact information provided with your purchase or visit the official OLEVS store online.
Manufacturer: XIN LINGYU





