HOME DESIGN Tory Upholstered Panel Bed (Queen, Dark Grey) User Manual

Introduction

Thank you for choosing the HOME DESIGN Tory Upholstered Panel Bed. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bed. Please read this manual thoroughly before assembly and retain it for future reference.

The Tory Upholstered Panel Bed features a clean-styled upholstered headboard with nail head trim, crafted from quality fabric. It includes a low-profile footboard and is designed for easy assembly, with all parts conveniently located in a zippered compartment on the back of the headboard.

Important Safety Information

WARNING:

• Keep small children and pets away during assembly to prevent choking hazards from small parts.
• Do not place any open flames or heat sources near the bed to prevent fire risk.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the recommended weight capacity for the bed frame.
• Use only the mattress size for which the bed is designed (Queen).

Package Contents

Before beginning assembly, verify that all parts are present and undamaged. All assembly parts are located in the zippered compartment on the back of the headboard.

• Upholstered Headboard with Nail Head Trim
• Footboard
• Side Rails (2)
• Center Support Beam
• Wooden Slats
• Legs (for headboard, footboard, and center support)
• Hardware Pack (bolts, washers, nuts, Allen wrench)

Image: The bed frame components, including the upholstered headboard, side rails, footboard, and wooden slats, laid out before assembly. This shows the structure that supports the mattress.

Setup and Assembly

Assembly is required for this product. It is recommended that two adults assemble the bed. Please follow these general steps:

1. Unpack Components: Carefully remove all parts from the packaging. Locate the zippered compartment on the back of the headboard and retrieve all hardware and smaller components from inside.
2. Attach Legs: Securely attach the legs to the headboard and footboard using the provided hardware.
3. Connect Side Rails: Attach the side rails to the headboard and footboard using the appropriate bolts and washers. Ensure connections are firm but do not overtighten until all major components are aligned.
4. Install Center Support: Place the center support beam and its legs into position, connecting it to the headboard and footboard rails if applicable, or to the side rails.
5. Place Slats: Lay the wooden slats across the side rails, ensuring they are evenly spaced and secured according to the instructions provided with the hardware.
6. Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws.

Image: A diagram showing the overall dimensions of the assembled Queen size bed: 85.7 inches in length, 64.42 inches in width, and 45.51 inches in height at the headboard.

Operating Instructions

The HOME DESIGN Tory Upholstered Panel Bed is designed for standard Queen size mattresses. Once assembled, place your mattress directly onto the wooden slats. A box spring is not typically required but can be used if desired for additional height or support, depending on your mattress type.

• Ensure the mattress is centered on the bed frame.
• Avoid jumping on the bed, as this can damage the frame and slats.
• Distribute weight evenly across the bed surface.

Image: The fully assembled HOME DESIGN Tory Upholstered Panel Bed with a mattress and bedding, showcasing its appearance in a contemporary room.

Care and Maintenance

Proper care will extend the life and appearance of your upholstered bed.

• Cleaning Fabric: For general cleaning, vacuum the upholstered headboard and side rails regularly using an upholstery attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner or use a mild fabric cleaner designed for upholstered furniture, testing on an inconspicuous area first.
• Frame Care: Wipe down the wooden or metallic parts of the frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Hardware Check: Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Re-tighten if necessary to maintain stability and prevent squeaking.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fabric fading. Position your bed away from direct sunlight or use curtains/blinds.

Image: A detailed view of the headboard's dark grey fabric upholstery and the decorative silver nail head trim along its curved edge.

Troubleshooting

Product Specifications

Warranty and Customer Support

HOME DESIGN stands behind the quality of its products. For specific warranty details, please refer to the documentation included with your purchase or contact the seller directly. This product is eligible for a 30-day easy return policy.

For assistance with assembly, missing parts, or any other inquiries, please contact HMD Furniture, the seller, or Amazon Customer Support.

• Seller: HMD Furniture (View Seller Profile)
• Amazon Customer Support: For general inquiries or returns, visit Amazon Customer Service.
• Optional Protection Plans: Additional protection plans (2-Year, 3-Year, or Complete Protect) may be available for purchase separately.