1. Introduction
Thank you for choosing the Oypla Blue 3 Tier 36 Cupcake Plastic Carrier Holder Storage Container. This manual provides essential information for the safe and effective use of your product. Please read these instructions carefully before initial use and retain them for future reference.
2. Product Overview
The Oypla 3 Tier Cupcake Carrier is designed for storing and transporting up to 36 cupcakes. Its modular design allows for versatility, enabling it to carry various baked goods.
2.1 Key Features
- 3 removable compartments, each holding up to 12 cupcakes.
- Removable cupcake holders for carrying sheet cakes or other treats.
- Secure snap fittings to keep contents safe during transport.
- Sealed design to help maintain freshness.
- Integrated handle for easy carrying.
2.2 Dimensions
The overall dimensions of the assembled carrier are approximately 35 cm (length) x 26 cm (width) x 27.5 cm (height).
2.3 Product Components
The carrier consists of a base, three individual tiers with removable cupcake inserts, a top lid, and a carrying handle. Each tier is designed to stack securely.
Figure 1: Fully assembled Oypla 3 Tier Cupcake Carrier.
Figure 2: Front view of the carrier, showcasing the three tiers.
Figure 3: Detail of the top tier and integrated handle.
3. Setup Instructions
3.1 Unpacking
Carefully remove all components from the packaging. Inspect for any damage. Dispose of packaging materials responsibly.
3.2 Assembly
- Ensure all parts are clean before assembly. Refer to the 'Maintenance and Care' section for cleaning instructions.
- Place the bottom tier onto a flat, stable surface.
- If using for cupcakes, ensure the blue cupcake insert is correctly seated within the tier. The insert has ridges on one side for cupcakes and is plain on the reverse for flat items.
- Carefully align the next tier on top of the previous one. Ensure the side clips engage securely. Repeat for all three tiers.
- Place the lid on the top tier, ensuring all four lid clips snap into place firmly.
Figure 4: Individual tiers with cupcake inserts removed.
Figure 5: Detail of the secure snap fittings between tiers.
4. Operating Instructions
4.1 Using with Cupcakes
- Ensure the blue cupcake inserts are placed with the ridged side facing upwards in each tier.
- Carefully place up to 12 cupcakes into the designated slots on each tier.
- Stack the tiers and secure the lid as described in the 'Assembly' section.
4.2 Using with Other Baked Goods (e.g., Sheet Cakes)
- To carry larger items like sheet cakes or tray bakes, remove the blue cupcake inserts from the desired tiers.
- Place your baked goods directly onto the flat base of the tier.
- Stack the tiers and secure the lid as described in the 'Assembly' section.
4.3 Securing the Carrier
Always ensure all side clips between tiers and the lid clips are firmly engaged before lifting or transporting the carrier. This prevents accidental opening and helps maintain the freshness of the contents.
5. Maintenance and Care
5.1 Cleaning
- The Oypla Cupcake Carrier is not dishwasher-safe.
- Hand wash all components with warm, soapy water.
- Rinse thoroughly with clean water.
- Allow all parts to air dry completely before reassembling or storing to prevent moisture buildup.
- Avoid using abrasive cleaners or scouring pads, as these can scratch the plastic surface.
5.2 Storage
Store the carrier in a clean, dry place away from direct sunlight and extreme temperatures when not in use. Disassembling the tiers can save storage space.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tiers do not stack securely. | Clips not fully engaged; debris obstructing connection. | Ensure clips are aligned and pressed firmly until they click. Check for and remove any food particles or debris. |
| Lid does not close properly. | Lid clips not aligned; contents too tall. | Align lid clips with the top tier. Ensure contents do not exceed the height of the top tier. |
| Contents not staying fresh. | Lid or tier clips not fully sealed. | Verify all clips are securely fastened to create an airtight seal. |
| Handle feels unstable when carrying. | Excessive weight; clips not fully secured. | Ensure all tiers and the lid are securely clipped. Avoid overloading the carrier beyond its intended capacity. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | OYP4054 |
| Material | Plastic |
| Color | Blue |
| Dimensions (L x W x H) | 35 x 26 x 27.5 cm (approximate) |
| Item Weight | 2.1 Kilograms |
| Capacity | 36 Cupcakes (12 per tier) |
| Dishwasher Safe | No (Hand wash recommended) |
| Special Features | Removable tiers and inserts |
8. Warranty Information
Specific warranty details for the Oypla Blue 3 Tier 36 Cupcake Plastic Carrier Holder Storage Container are not provided within this manual. For information regarding warranty coverage, please refer to the product packaging or contact the retailer where the product was purchased. Please retain your proof of purchase for any warranty claims.
9. Customer Support
If you encounter any issues or have questions regarding your Oypla Blue 3 Tier 36 Cupcake Plastic Carrier Holder Storage Container that are not addressed in this manual, please contact the retailer or the manufacturer's customer service department. Contact information can typically be found on the product packaging or the official Oypla website.