Metrex 10-4400

Metrex Empower 10-4400 Dual Enzymatic Detergent Fragrance Free User Manual

Model: 10-4400 | Brand: Metrex

1. Introduction

The Metrex Empower 10-4400 is a multi-enzymatic detergent designed for the effective cleaning of medical instruments and equipment. This low-foaming, fragrance-free solution facilitates a one-step cleaning process by disintegrating blood, tissue, mucous, and other protein-rich body fluids. It is formulated to be safe for a wide range of materials commonly found in medical devices.

2. Product Overview

Metrex Empower Dual Enzymatic Detergent contains two proteolytic enzymes that efficiently break down organic matter. Its neutral pH formula provides advanced corrosion protection, making it safe for materials such as rubber, plastic, stainless steel, carbon steel, and soft metals. The detergent is designed for rapid action in various cleaning systems.

Key Features:

  • Dual Enzymatic Formula: Contains two proteolytic enzymes for effective breakdown of bioburden.
  • Low-Foaming: Ideal for use in evacuation lines and automated systems.
  • Fragrance-Free: Suitable for environments where scents are undesirable.
  • Fast Acting: Rapidly dissolves and carries away organic soils in manual, ultrasonic, and automatic cleaning systems.
  • Instrument Safe: Neutral pH formula provides corrosion protection for various instrument materials.
  • User Safe: Reduces the need for extensive manual handling and scrubbing, particularly in hard-to-reach areas like channels, lumens, and instrument box locks.
Metrex Empower 10-4400 Dual Enzymatic Detergent, 1 Gallon Bottle

Image 1: Metrex Empower 10-4400 Dual Enzymatic Detergent, 1 Gallon Bottle. This image displays a white 1-gallon bottle of Metrex Empower Dual Enzymatic Detergent, Fragrance Free. The label highlights its multi-enzymatic properties, low-foaming nature, and safety for instruments and users.

3. Safety Information

WARNING: KEEP OUT OF REACH OF CHILDREN.

This product is for professional use only. Refer to the Safety Data Sheet (SDS) for complete safety information. Always wear appropriate personal protective equipment (PPE), including gloves and eye protection, when handling this product.

Rx only: For US law only.

4. Setup

Before use, ensure the work area is well-ventilated. Gather all necessary instruments and equipment to be cleaned. Prepare the cleaning solution according to the instructions on the product label or your facility's established protocols. Typically, this involves diluting the concentrated detergent with water.

5. Operating Instructions

Metrex Empower 10-4400 can be used in manual, ultrasonic, and automatic cleaning systems. Always follow the specific dilution ratios and contact times recommended on the product label for optimal performance and instrument compatibility.

General Application Steps:

  1. Dilution: Prepare the working solution by diluting the concentrate with water as specified on the product label.
  2. Immersion/Application: Immerse instruments completely in the prepared solution or apply the solution as directed for your cleaning system. Ensure all surfaces are exposed to the detergent.
  3. Soak Time: Allow instruments to soak for the recommended duration to permit enzymatic action.
  4. Rinsing: Thoroughly rinse instruments with water after cleaning to remove all detergent residue.
  5. Disposal: Dispose of used solution according to local regulations.

Note: Specific instructions for manual scrubbing, ultrasonic baths, or automated washers may vary. Always consult the product label and your facility's protocols.

6. Maintenance

Store Metrex Empower 10-4400 in its original container, tightly closed, in a cool, dry place away from direct sunlight and incompatible materials. Do not freeze. Ensure the container is properly sealed after each use to maintain product integrity.

7. Troubleshooting

If cleaning results are unsatisfactory, verify that the correct dilution ratio was used, the contact time was sufficient, and the water quality is appropriate. Ensure instruments were properly pre-cleaned if necessary. If issues persist, consult the product label or contact Metrex customer support for further assistance.

8. Specifications

Item Model Number10-4400
BrandMetrex
Volume1 Gallon (3.8 Litres)
FormulationDual Enzymatic Detergent, Low-Foaming, Fragrance-Free
Package DimensionsApproximately 10 x 10 x 10 inches
Package WeightApproximately 38.49 Pounds (for a pack of 4)
ManufacturerMetrex Research Corporation

9. Warranty and Support

Specific warranty information for Metrex Empower 10-4400 Dual Enzymatic Detergent is not provided within this manual. For details regarding product warranty, technical support, or any inquiries, please contact Metrex Research Corporation directly through their official website or customer service channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.