Yaheetech Professional 45mm Dance Pole Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe and effective use of your Yaheetech Professional 45mm Dance Pole. Please read all instructions carefully before assembly and use. Proper installation and maintenance are crucial for user safety and product longevity.

1.1 Safety Information

• Ensure the pole is installed on a stable, level surface and securely anchored between a ceiling beam and the floor.
• Regularly inspect all components for wear, damage, or loose connections before each use.
• Do not exceed the maximum recommended weight capacity (if specified by manufacturer, otherwise use general safety precautions).
• Keep children and pets away from the pole during use.
• Wipe the pole with a dry cloth after each use to prevent rust and maintain grip.

2. Package Contents

Verify that all components listed below are present and undamaged before proceeding with assembly.

• Main Pole A (Upper Pole)
• Main Pole B (Lower Pole)
• Extension A
• Extension B
• Cover
• Top Dome (15.5 inches diameter)
• Base Dome (9 inches diameter)
• Tools (wrenches, hex key)
• Instruction Manual

3. Setup Instructions

Follow these steps carefully to assemble and install your dance pole. It is recommended to have a second person assist with installation.

1. Identify a Suitable Location: Choose a location with a solid ceiling beam for secure installation. Use a stud finder to locate a ceiling joist. The area should be clear of obstructions.
2. Determine Pole Height: Measure the floor-to-ceiling height. Select the appropriate combination of Main Poles and Extensions to achieve the desired height. The pole is adjustable from 85 inches (7 feet) to 108.5 inches (9 feet).

   

3. Assemble Pole Sections: Connect the chosen pole sections by screwing them together firmly. Ensure all threaded connections are tight and secure. The chrome-plated steel construction provides strength and durability.

   

4. Attach Domes: Place the Base Dome on the floor and the Top Dome on the ceiling, aligning them directly above each other. The domes feature silicone rubber rims to protect surfaces and enhance stability.

   

5. Install the Pole: Carefully lift the assembled pole and position it between the Top Dome and Base Dome. Ensure the pole is perfectly vertical using a spirit level.
6. Adjust and Secure: Rotate the adjustment mechanism (typically located at the top of the lower pole section) to extend the pole and create tension between the floor and ceiling. Tighten until the pole is firmly secured and does not wobble. Do not overtighten.
7. Final Check: Gently pull and push on the pole to confirm its stability. Re-tighten if any movement is detected.

4. Operating Modes

Your Yaheetech dance pole offers both static and spinning modes for versatile use.

4.1 Switching Between Modes

The mode selection is controlled by clamping screws located at the base of the pole.

• Static Mode: To engage static mode, fasten the clamping screws to the base pole using the provided hex key. This locks the pole in a fixed position, ideal for strength training and static holds.
• Spinning Mode: To engage spinning mode, loosen the clamping screws from the base pole. This allows the pole to rotate freely, enabling dynamic movements and spins.

5. Maintenance

Regular maintenance ensures the safety and extends the lifespan of your dance pole.

• Cleaning: After each use, wipe down the entire pole with a dry, clean rag to remove sweat and residue. This prevents rust and maintains optimal grip. Avoid abrasive cleaners that could damage the chrome finish.
• Inspection: Periodically check all pole sections, connections, and domes for any signs of wear, cracks, or damage. Ensure all screws and bolts remain tight.
• Storage: If disassembling for storage, ensure all parts are clean and dry. Store in a dry environment to prevent corrosion.

6. Troubleshooting

Refer to this section for solutions to common issues.

• Pole feels unstable:
  - Ensure the pole is installed directly under a ceiling beam.
  - Verify that the Top and Base Domes are perfectly aligned.
  - Re-tighten the adjustment mechanism until the pole is firm. Use a spirit level to confirm vertical alignment.
• Difficulty switching between static and spinning modes:
  - Ensure the clamping screws are fully tightened for static mode or fully loosened for spinning mode. Check for any debris obstructing the mechanism.
• Grinding or clicking noises in spinning mode:
  - This may indicate that the internal bearings require cleaning or lubrication. Disassemble the relevant section, clean thoroughly, and apply a small amount of appropriate lubricant if necessary. Ensure all parts are reassembled correctly.
• Pole sections difficult to separate:
  - If pole sections become stuck, try applying gentle, even pressure while twisting. Avoid excessive force. A small amount of penetrating oil might help if corrosion is suspected, but ensure it is thoroughly cleaned off before reassembly and use.

7. Specifications

8. Warranty Information

Yaheetech products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Yaheetech customer support directly. Keep your proof of purchase for warranty claims.

9. Customer Support

If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact Yaheetech customer support. You can often find contact information on the official Yaheetech website or through the retailer where the product was purchased.

Visit the Yaheetech Store for more information and support resources.