Introduction
This manual provides essential information for the safe and efficient use of your Rocada E-Table electric height-adjustable desk. Please read these instructions carefully before assembly and operation.
The Rocada E-Table features a 25mm thick melamine surface with PVC edging, supported by a robust steel tube and sheet structure. Its electric mechanism allows for three-level height adjustment, providing ergonomic flexibility for various tasks.
Safety Instructions
- Ensure all components are present and undamaged before assembly.
- Keep children and pets away from the desk during operation.
- Do not overload the desk. Refer to specifications for maximum weight capacity.
- Ensure the power cable is not pinched or damaged.
- Disconnect power before cleaning or maintenance.
- Only use the desk for its intended purpose.
Setup and Assembly
This section outlines the general steps for assembling your Rocada E-Table. While specific tools are not listed, standard assembly tools (e.g., screwdrivers, Allen keys) are typically required.
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the packing list are present and undamaged.
- Assemble the Frame: Attach the desk legs to the crossbar and feet according to the diagrams provided in the separate assembly guide. Ensure all screws are tightened securely.
- Attach the Desktop: Carefully place the desktop onto the assembled frame. Align the pre-drilled holes and secure the desktop using the provided screws.
- Install Control Panel: Mount the electric control panel to the underside of the desktop in an easily accessible location. Connect the motor cables and power supply cable to the control unit.
- Connect Power: Plug the power cord into a suitable electrical outlet.
- Initial Test: Perform a brief test of the height adjustment mechanism to ensure it operates smoothly.
Image: The Rocada E-Table desk set up in an office environment, showcasing its design and functionality. A laptop and office chair are visible, indicating its use as a workstation.
Image: A detailed view of the desk's leg and base structure, highlighting the sturdy construction and height adjustment mechanism.
Operating Instructions
Your Rocada E-Table features an intuitive electric control panel for adjusting the desk height.
Basic Height Adjustment
- To Raise the Desk: Press and hold the "Up" arrow button on the control panel. The desk will move upwards. Release the button when the desired height is reached.
- To Lower the Desk: Press and hold the "Down" arrow button on the control panel. The desk will move downwards. Release the button when the desired height is reached.
Memory Presets (if applicable)
Some models may include memory preset buttons (e.g., M1, M2, M3) to save preferred heights.
- To Save a Height: Adjust the desk to your desired height. Press the "M" button (or "Set" button) once, then press one of the numbered preset buttons (e.g., "1", "2", "3") within 3 seconds. The display may flash to confirm.
- To Recall a Height: Press and hold the desired numbered preset button (e.g., "1") until the desk reaches the saved height.
Image: A white version of the Rocada E-Table, showing the integrated control panel on the underside of the desktop for electric height adjustment.
Image: A woman comfortably working at the Rocada E-Table desk in a seated position, demonstrating its ergonomic use.
Image: A woman utilizing the Rocada E-Table desk in a standing position, highlighting the desk's ability to promote active working postures.
Maintenance
- Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Cable Management: Periodically check that all cables are neatly organized and not interfering with the desk's movement.
- Fasteners: Occasionally check and tighten any loose screws or bolts to ensure stability.
- Motor Care: The electric motor is maintenance-free. Do not attempt to open or lubricate it.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected; motor overload; control panel issue. | Check power connection. Unplug and replug the desk. Reduce weight on the desk. Contact support if issue persists. |
| Desk moves unevenly. | Uneven weight distribution; loose fasteners. | Distribute weight evenly. Check and tighten all assembly screws. |
| Unusual noise during operation. | Obstruction; loose components. | Check for any objects obstructing the desk's movement. Ensure all parts are securely fastened. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Rocada |
| Model Number | 2002XCR01 |
| Tabletop Material | 25mm Melamine with PVC edging |
| Frame Material | Steel tube and sheet |
| Height Adjustment | Electric, three-level column |
| Dimensions | 160cm x 80cm (Length x Width) |
| Special Features | Height Adjustable |
| Style | Modern |
| Top Material Type | Melamine |
| Frame Material | Steel, PVC |
| Furniture Finish | Melamine, PVC |
Warranty and Support
For warranty information or technical support, please contact Rocada customer service. Keep your purchase receipt as proof of purchase.
For further assistance, please visit the official Rocada website or contact your retailer.
