1. Introduction
This manual provides essential information for the safe and effective use of your Feit Electric A19 LED Light Bulb, Model OM60DM/930CA/4. This energy-efficient LED bulb is designed to replace traditional 60-watt incandescent bulbs, offering significant energy savings and a long operational lifespan.
The Feit Electric A19 LED bulb features a 3000K bright white color temperature, 800 lumens of brightness, and a high Color Rendering Index (CRI) of 90+ for realistic and vibrant color representation. It is dimmable, suitable for use in enclosed fixtures, and rated for damp locations.
Image 1.1: Feit Electric A19 LED Light Bulbs (4-pack). This image displays the four individual bulbs included in the product package, highlighting their standard A19 shape and E26 medium base.
Safety Information
- Risk of Electric Shock: Always turn off power to the fixture before inspecting, installing, or removing the bulb.
- Risk of Burns: Do not touch the bulb when it is operating or immediately after turning it off. Allow the bulb to cool before handling.
- Not for Emergency Exits: This bulb is not intended for use with emergency exit fixtures or emergency lights.
- Dimmability: This bulb is dimmable. Ensure your dimmer switch is compatible with LED technology for optimal performance and to prevent damage.
- Indoor/Outdoor Use: Suitable for indoor and outdoor use, including damp locations. Do not expose to direct water spray or submersion.
2. Setup and Installation
Installing your Feit Electric A19 LED Light Bulb is a simple process. Follow these steps carefully:
- Turn Off Power: Before installation, ensure the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it has been recently in use.
- Insert New Bulb: Screw the Feit Electric A19 LED bulb into the standard E26 medium base socket. Turn clockwise until it is finger-tight. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
- Test: Turn on the light switch to confirm the bulb is working correctly.
Image 2.1: A19 LED Bulb Light Specification. This diagram illustrates the physical dimensions (2.3 inches width, 4.3 inches height) and key specifications of the bulb, including 800 lumens brightness, 8.8W wattage, 22.8 years lifetime, and E26 medium base type.
3. Operating Instructions
Your Feit Electric A19 LED bulb is designed for simple operation and enhanced functionality.
Standard Operation
Once installed, the bulb operates like any standard light bulb. Simply use your wall switch to turn the light on or off.
Dimming Functionality
This LED bulb is fully dimmable, allowing you to adjust the light output to suit your preference and create the desired ambiance. For optimal performance, ensure your dimmer switch is compatible with LED lighting. The bulb supports a dimming range of 10% to 100%.
Image 3.1: Smooth Dimmability. This visual representation shows a room's lighting changing across five stages, from 10-20% brightness to 81-100% brightness, illustrating the bulb's smooth dimming capability.
4. Maintenance
Feit Electric A19 LED bulbs require minimal maintenance due to their long lifespan and durable design.
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the bulb.
- Replacement: With an average life of 25,000 hours (approximately 22.8 years based on 3 hours/day), frequent replacement is not necessary. Replace the bulb only when it reaches the end of its operational life.
- Storage: If storing bulbs, keep them in their original packaging in a cool, dry place to protect them from damage.
5. Troubleshooting
If you encounter issues with your Feit Electric A19 LED bulb, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up | No power to the fixture; Bulb not screwed in properly; Faulty bulb or fixture. | Check power supply and circuit breaker. Ensure bulb is securely screwed into the socket. Test the bulb in another working fixture or try a different bulb in the same fixture. |
| Bulb flickers or blinks | Incompatible dimmer switch; Loose connection; Electrical interference. | Ensure your dimmer switch is LED-compatible. Tighten the bulb in the socket. If flickering persists, try the bulb in a non-dimmable fixture to rule out dimmer incompatibility. |
| Bulb hums or buzzes | Incompatible dimmer switch; Electrical interference. | This is often caused by incompatible dimmer switches. Replace with an LED-compatible dimmer. If used in a non-dimmable fixture, check for loose wiring or consult an electrician. |
| Light output is too low or too high | Dimmer setting; Incorrect bulb for application. | Adjust the dimmer setting. Ensure the bulb's brightness (800 lumens) and color temperature (3000K) are suitable for your intended use. |
6. Specifications
Detailed technical specifications for the Feit Electric A19 LED Light Bulb (Model OM60DM/930CA/4):
| Feature | Specification |
|---|---|
| Model Number | OM60DM/930CA/4 |
| Light Type | LED |
| Bulb Shape Size | A19 |
| Bulb Base | E26 Medium |
| Wattage | 8.8 Watts |
| Incandescent Equivalent | 60 Watts |
| Brightness | 800 Lumens |
| Color Temperature | 3000K Bright White |
| Color Rendering Index (CRI) | 90+ |
| Dimmable | Yes (10%-100% range) |
| Voltage | 120 Volts (100-120V, 60Hz) |
| Average Life | 25,000 Hours (22.8 years based on 3 hrs/day) |
| Indoor/Outdoor Usage | Indoor, Outdoor (Damp Rated) |
| Certifications | UL Listed, Energy Star, FCC, RoHS, CEC Certified |
| Material | Plastic |
| Product Dimensions | 2.3"W x 4.3"H |
Image 6.1: Feit LED A19 Bulb vs. Incandescent Bulb. This image compares the Feit LED A19 bulb, described as brighter, more efficient, eco-friendly with a lower carbon footprint, and safer, against a traditional incandescent bulb, which is noted for low efficiency, shorter lifespan, high heat output, and frequent replacements.
7. Warranty and Support
Warranty Information
This Feit Electric A19 LED Light Bulb comes with a 5-Year Limited Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For specific warranty terms and conditions, refer to the documentation included with your product packaging or visit the official Feit Electric website.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Feit Electric customer support:
- Website: Visit the official Feit Electric website for FAQs and support resources.
- Contact Information: Refer to your product packaging or the Feit Electric website for current customer service phone numbers and email addresses.
