Introduction
This manual provides essential information for the safe and effective use of your Masterplug 100ft Metal Cord Reel. Please read these instructions thoroughly before operation and retain for future reference.
Image: The Masterplug 100ft Metal Cord Reel, showcasing its robust design with an orange cable coiled around a metal drum, four power outlets, and a sturdy base.
Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury, always follow basic safety precautions when using electrical products.
- Do not immerse the cord reel in water or use it in wet conditions.
- Ensure the cord is fully unwound when using high-power appliances to prevent overheating.
- Always plug the cord reel into a grounded outlet.
- Do not overload the cord reel. The built-in safety overload circuit breaker will cut power in case of an overload.
- Keep children and pets away from the cord reel during operation.
- Inspect the cord and outlets for damage before each use. Do not use if damaged.
Product Features
- 100ft 12AWG Cable: Provides extended reach for various tasks.
- 4 Shuttered Power Outlets: Allows connection of multiple appliances.
- Integrated Power Switch: Localized control for turning power on/off at the reel.
- Safety Overload Circuit Breaker: Automatically cuts power to prevent overheating and damage from electrical overloads. Resettable after a cut-out.
- Durable Metal Cord Drum: High-quality construction for protection and longevity.
- Ergonomic Winding Handle: Two-tone handle for comfortable and easy cord retraction.
- Integrated Cord Guide: Facilitates tangle-free winding and unwinding of the cable.
- High Visibility Cable: Enhances safety in various work environments.
Image: An annotated view of the cord reel highlighting its key features: carry handle, heavy-duty steel stand, easy wind handle, and tangle-free cord guide.
Setup
- Unpack: Carefully remove the cord reel from its packaging.
- Position: Place the cord reel on a stable, flat surface near a grounded power outlet.
- Inspect: Before first use, visually inspect the entire length of the cable, the plug, and the outlets for any signs of damage.
Operating Instructions
- Extend the Cable:
- Grasp the cord reel by the handle.
- Pull the desired length of cable from the reel. Ensure the cable is fully unwound when connecting high-power devices to prevent heat buildup.
- The integrated cord guide helps prevent tangles during extension.
- Connect to Power:
- Plug the cord reel's main plug into a suitable grounded wall outlet.
- Power On:
- Press the red ON/OFF switch located on the face of the reel to the 'ON' position. The power LED indicator will illuminate, showing that power is live.
- Connect Appliances:
- Plug your tools or appliances into the four available shuttered outlets.
- Retract the Cable:
- After use, unplug all appliances and turn off the power switch.
- Use the winding handle to retract the cable back onto the drum. The cord guide will assist in neat coiling.
Image: A detailed view of the cord reel's control panel, showing the four grounded outlets, the safety overload reset button, the power indicator light, and the ON/OFF switch.
Maintenance
- Cleaning: Disconnect from power before cleaning. Wipe the exterior with a dry cloth. Do not use liquid cleaners.
- Storage: Store the cord reel in a dry, cool place, away from direct sunlight and moisture. Ensure the cable is fully retracted before storage.
- Inspection: Regularly inspect the cable for cuts, fraying, or insulation damage. Check the plug and outlets for wear or corrosion.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets. | Power switch is off. Overload circuit breaker tripped. Wall outlet has no power. | Ensure power switch is ON. Press the red reset button on the reel. Reduce connected load. Check wall outlet with another device or circuit breaker. |
| Cable tangles during winding/unwinding. | Improper use of cord guide. | Ensure cable passes through the integrated cord guide correctly. Wind/unwind slowly and evenly. |
| Cord reel feels hot. | Cable not fully unwound when in use. Overloaded. | Always fully unwind the cable when using high-power appliances. Disconnect appliances and allow to cool. Reduce total wattage. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Masterplug |
| Model Number | OTLP1001512G4SL-US |
| Cable Length | 100 ft |
| Wire Gauge | 12 AWG |
| Amperage | 15 Amps |
| Voltage | 127 Volts |
| Wattage | 1800 Watts |
| Number of Outlets | 4 |
| Material | Metal |
| Item Weight | 17.96 pounds |
| Product Dimensions | 11.14 x 7.87 x 12.8 inches |
Official Product Video
Video: An official Masterplug video titled "Power At Work," demonstrating the features and applications of the cord reel in various work environments.
Warranty
This Masterplug 100ft Metal Cord Reel comes with a 3-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Masterplug customer support.
Support
For further assistance, technical support, or inquiries regarding your Masterplug product, please refer to the contact information provided in your product packaging or visit the official Masterplug website.
