Soundfreaq Sound Rise Classic SFQ-14 User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Soundfreaq Sound Rise Classic SFQ-14. This device combines an analog alarm clock, FM radio, and Bluetooth speaker with a USB charging port, designed for bedside use.

Important Safety Information

• Read all instructions before use.
• Keep the device away from water and moisture.
• Do not expose to direct sunlight or extreme temperatures.
• Ensure proper ventilation; do not block ventilation openings.
• Use only the power adapter supplied by the manufacturer.
• Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.

Package Contents

Verify that all items are present in the package:

• Soundfreaq Sound Rise Classic SFQ-14 Unit
• Power Adapter
• AA Battery (1, pre-installed or separate)
• User Manual (this document)

Product Overview

Familiarize yourself with the various parts and controls of your Sound Rise Classic SFQ-14.

Figure 1: Front View. This image displays the front of the Soundfreaq Sound Rise Classic SFQ-14, featuring a prominent analog clock face with white hands and markers on a black background. Below the analog clock, a small digital display shows "FM SLEEP" and "106.50 MHz". The Soundfreaq logo and "Bluetooth" icon are also visible on the clock face. The lower part of the unit has horizontal ridges, and a stylized logo is present at the bottom left.

Figure 2: Top Control Panel. This image provides a detailed view of the top control panel. From left to right, there are switches for "WAKE TO" (RADIO, BT, AUX, BEEP) and "ALARM" (ON, OFF). Below these are buttons for "SOURCE", "Bluetooth pairing", "PRESET", "ALM VOL" (previous track, play/pause, next track), and "VOL" (minus, plus). A large "SNOOZE / LIGHT" button is centrally located, flanked by a "UQ+" button on the left and a power button on the right.

Controls and Indicators:

• Analog Clock Face: Displays current time with hour, minute, and second hands.
• Digital Display: Shows FM frequency, sleep timer status, and other indicators.
• Wake To Switch: Selects alarm source (Radio, Bluetooth, Aux, Beep).
• Alarm ON/OFF Switch: Activates or deactivates the alarm function.
• Source Button: Cycles through audio input modes (FM, Bluetooth, Aux).
• Bluetooth Button: Initiates Bluetooth pairing mode.
• Preset Buttons: Navigates through saved FM radio stations.
• Alarm Volume / Track Control: Adjusts alarm volume or skips tracks in Bluetooth mode.
• Volume +/- Buttons: Adjusts playback volume.
• Snooze / Light Button: Temporarily silences the alarm and activates the backlight.
• UQ+ Button: Activates UQ3 Sound Enhancement.
• Power Button: Turns the unit on or off.
• USB Charging Port: Located on the back or side for charging external devices.
• 3.5mm Line-in Jack: For connecting external audio sources.

Setup

1. Power Connection

1. Connect the provided power adapter to the DC input jack on the back of the Sound Rise Classic.
2. Plug the power adapter into a standard wall outlet. The unit will power on automatically or enter standby mode.

2. Battery Installation (Backup)

The unit includes one AA battery for time and alarm settings backup during power outages.

1. Locate the battery compartment on the bottom or back of the unit.
2. Insert one AA battery, observing the correct polarity (+/-).
3. Close the battery compartment cover securely.

3. Setting the Time

The analog clock hands are set manually.

1. Locate the time setting knob on the back or side of the unit (often a small wheel or dial).
2. Rotate the knob to adjust the hour and minute hands to the current time.
3. The digital display will automatically synchronize or can be set separately if applicable (refer to specific model instructions if digital time setting is available).

Figure 3: Clock in Use. This image shows the Soundfreaq Sound Rise Classic SFQ-14 positioned on a wooden nightstand. The analog clock hands indicate approximately 11:55, and the digital display below shows "8:50". A green plant and a stack of books are visible in the background, suggesting a typical bedroom environment.

Operating Instructions

Power On/Off

• Press the Power Button (

  Adjusting Volume

  • Press the Volume + or Volume - buttons to increase or decrease the audio output level.

  FM Radio Operation

  1. Press the Source button until "FM" appears on the digital display.
  2. Use the Preset buttons (<< / >>) to tune to your desired FM station. A long press may initiate an auto-scan for available stations.
  3. To save a preset, tune to the desired station, then press and hold one of the Preset buttons until the display confirms the save.

  Bluetooth Speaker Function

  1. Press the Source button until "BT" (Bluetooth) appears on the digital display. The unit will enter pairing mode, indicated by a flashing Bluetooth icon.
  2. On your mobile device, enable Bluetooth and search for "Sound Rise Classic" in the list of available devices.
  3. Select "Sound Rise Classic" to pair. Once paired, the Bluetooth icon on the display will stop flashing.
  4. You can now play audio from your device through the Sound Rise Classic. Use the track control buttons (<< / >>) to navigate tracks and the play/pause button (>) for playback control.

  Auxiliary Input

  1. Connect an external audio device (e.g., MP3 player) to the 3.5mm Line-in jack using an audio cable (not included).
  2. Press the Source button until "AUX" appears on the digital display.
  3. Audio from your external device will now play through the Sound Rise Classic. Control playback from your external device.

  Setting the Alarm

  1. Locate the alarm setting wand on the analog clock face. This is typically a small, movable indicator.
  2. Rotate the alarm setting wand to the desired wake-up time. Note that this alarm mechanism does not distinguish between AM and PM.
  3. Select your desired alarm source using the WAKE TO switch (RADIO, BT, AUX, BEEP).
  4. Slide the ALARM switch to the "ON" position to activate the alarm.
  5. To adjust alarm volume, use the ALM VOL buttons.

  Note: Due to the analog alarm setting, the alarm will sound twice a day (e.g., 7 AM and 7 PM) if left in the "ON" position. You must manually turn the alarm "OFF" after waking and "ON" again before going to sleep if you only desire a morning alarm.

  Snooze Function

  • When the alarm sounds, press the large SNOOZE / LIGHT button to temporarily silence the alarm for a few minutes. The alarm will sound again after the snooze period.

  Backlight Control

  • Press the SNOOZE / LIGHT button to activate the backlight for the analog clock face and digital display. The backlight will remain on for a short duration.

  USB Charging Port

  • Connect your mobile device's USB charging cable to the USB port on the Sound Rise Classic to charge your device. This port is for charging only and does not transfer data.

  UQ3 Sound Enhancement

  • Press the UQ+ button to activate or deactivate the UQ3 Sound Enhancement Process for improved audio quality.

Maintenance

Cleaning

• Unplug the unit from the power outlet before cleaning.
• Use a soft, dry cloth to wipe the exterior surfaces.
• Do not use liquid cleaners, abrasive cleaners, or sprays, as these may damage the finish or internal components.

Battery Replacement

• If the time or alarm settings are lost during a power outage, the backup battery may need replacement.
• Replace the AA battery in the battery compartment, ensuring correct polarity.

Troubleshooting

Specifications

Warranty and Support

For detailed warranty information and customer support, please refer to the official Soundfreaq website or contact their customer service directly. Warranty terms may vary by region and retailer.

You can typically find support resources, FAQs, and contact information on the manufacturer's website: www.soundfreaq.com