Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Sauder Clifford Place L-Desk, Model 421120. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This L-shaped desk, featuring a Grand Walnut finish, is designed to enhance your home office or workspace with ample surface area and integrated storage solutions.
Image: The Sauder Clifford Place L-Desk, showcasing its L-shaped design and Grand Walnut finish.
Important Safety Information
Always adhere to the following safety guidelines to ensure safe use and prevent injury or damage:
- Assemble the desk strictly according to the provided instructions.
- Ensure the desk is properly anchored to the floor to prevent tipping, especially when utilizing drawers or the reversible return section.
- Exercise caution when using the grommet holes for cord management to prevent potential entrapment hazards.
- Always observe the recommended weight limits for the desk and its components. The maximum weight recommendation is 50 pounds.
Package Contents
Your Sauder Clifford Place L-Desk is shipped in two separate boxes. Please verify that you have received both packages and all components before beginning assembly. The packages contain:
- All necessary furniture panels and parts.
- Hardware kit (screws, cam locks, bolts, etc.).
- Assembly instructions manual.
Image: Illustration showing the desk and two shipping boxes, indicating that the product ships in two separate packages.
Important Note: It is recommended to check that both boxes originate from the same country to avoid potential part mismatches. If you encounter any discrepancies, contact customer support before proceeding with assembly.
Setup and Assembly Instructions
Assembly of the Sauder Clifford Place L-Desk requires attention to detail. It is recommended that two adults perform the assembly. Tools recommended for assembly include a drill, hammer, and screwdriver. Please follow the step-by-step instructions provided in the included manual carefully.
- Unpack and Organize: Carefully unpack all components and lay them out. Group similar parts together (e.g., ends, tops, drawer pieces).
- Identify Hardware: Familiarize yourself with the different types of screws, cam locks, and bolts. Using the correct hardware for each step is crucial.
- Follow Steps Sequentially: Begin with Step 1 and proceed in order. Double-check each step before moving to the next to avoid reassembly.
- Reversible Return: The desk's return section can be fastened to either the left or right side to suit your room's layout. Ensure you select the correct orientation during assembly.
Image: The assembled L-Desk in a room, demonstrating its functional layout.
Features
The Sauder Clifford Place L-Desk is designed with several features to enhance functionality and aesthetics:
- Ample Workspace: Provides a large L-shaped surface for computers, documents, and other office essentials.
- Storage Drawers: Includes three easy-gliding storage drawers for various items.
- File Drawers: Two file drawers with full extension slides accommodate letter-size hanging files.
- Slide-Out Keyboard/Mouse Shelf: A dedicated shelf that operates on smooth metal runners for keyboard and mouse.
- Cubbyhole Storage: Open storage areas for books, bins, and folders.
- Grommet Holes: Integrated holes for organized cable management.
- Grand Walnut Finish: An elegant finish that complements various interior designs.
- Solid Wood Feet: Sturdy and stylish feet providing stable support.
Image: Slide-out keyboard/mouse shelf.
Image: File drawer with full extension slides.
Image: Cubbyhole storage for organization.
Image: Grommet hole for cable management.
Operating Instructions
Using your L-Desk effectively:
- Drawers: The storage and file drawers operate on smooth metal runners. Pull them gently to open and push firmly to close. Ensure file drawers are not overloaded to maintain smooth operation.
- Keyboard/Mouse Shelf: Extend the shelf by pulling it forward. Retract it by pushing it back into the desk. Avoid placing heavy objects on the shelf.
- Cable Management: Utilize the integrated grommet holes to route power cords and data cables, keeping your workspace tidy and organized.
Maintenance and Care
To maintain the appearance and longevity of your Sauder Clifford Place L-Desk:
- Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the Grand Walnut finish.
- Spills: Clean spills immediately to prevent staining or damage to the wood finish.
- Heat and Moisture: Protect the desk from direct heat sources and excessive moisture. Use coasters under beverages.
- Hardware: Periodically check and tighten any loose hardware to ensure structural integrity.
Troubleshooting
If you encounter issues during assembly or use, consider the following:
- Missing or Damaged Parts: If parts are missing or damaged upon arrival, contact Sauder customer support immediately. Refer to the parts list in your assembly manual.
- Assembly Difficulties: Review the assembly instructions carefully. Ensure all parts are oriented correctly and the proper hardware is used for each step. Sometimes, a fresh look or a second pair of eyes can help identify an overlooked detail.
- Drawers Not Gliding Smoothly: Check that the drawer slides are correctly installed and free of obstructions. Ensure the desk is level.
- Desk Wobbles: Verify that all cam locks and screws are fully tightened. Ensure the desk is on a flat, even surface.
Specifications
| Brand | Sauder |
| Model Number | 421120 |
| Model Name | Clifford Place |
| Dimensions (L x W x H) | 59.06" x 53.54" x 30.2" (150.0 cm x 136.0 cm x 76.7 cm) |
| Finish Type | Grand Walnut Finish |
| Base Material | Engineered Wood |
| Number of Drawers | 5 (3 storage, 2 file) |
| Maximum Weight Recommendation | 50 Pounds |
| Recommended People for Assembly | 1 (though 2 is often recommended for ease) |
| Required Assembly | Yes |
| Item Weight | 137.2 Pounds |
Image: Dimensional diagram of the Sauder Clifford Place L-Desk, showing overall and component measurements.
Warranty Information
The Sauder Clifford Place L-Desk comes with a 5-year limited warranty. This warranty covers parts and ensures lasting peace of mind regarding your investment. For specific details regarding coverage and claims, please refer to the warranty documentation included with your product or contact Sauder customer support.
Support Information
For assistance with assembly, missing parts, or any other inquiries, please contact Sauder customer support:
- Website: Visit sauder.com/service for assembly tip videos, replacement parts, and live chat support.
- Phone: Call 800-523-3987.
Image: Sauder Domestic Call Center information, including website and phone number.
