1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Commercial Electric 2 ft. High 100-Watt Equivalent Output White Integrated LED Strip Light (2-Pack). Please read this manual thoroughly before installation and retain it for future reference.
Image 1.1: Two Commercial Electric 2 ft. LED strip lights, illustrating the product in a two-pack configuration.
2. Safety Information
Observe the following safety precautions to reduce the risk of fire, electric shock, or injury:
- WARNING: Risk of electric shock. Disconnect power before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Do not install near heat sources or in areas with excessive moisture.
- Ensure the mounting surface can support the weight of the fixture.
- Do not attempt to modify the fixture. Integrated LEDs are not replaceable.
- This fixture is intended for indoor use only.
3. Package Contents
Your package should contain the following items:
- Integrated LED Strip Light Fixtures (2 units)
- Mounting Hardware (clips, screws, anchors)
- Linking Cord (for connecting multiple fixtures)
Image 3.1: Included mounting hardware, consisting of metal clips, screws, and plastic wall anchors, essential for securing the light fixture.
4. Specifications
| Feature | Detail |
|---|---|
| Brand | Commercial Electric |
| Model Number | CE-2FH-100W-2PACK |
| Light Source Type | Integrated LED |
| Wattage (per light) | 20 Watts |
| Watt Equivalence | 100 Watts |
| Brightness | 1800 Lumens |
| Color Temperature | 4000K (Bright White) |
| Color Rendering Index (CRI) | 80 |
| Dimmable | Yes |
| Connection Type | Plug-in |
| Installation Type | Flush Mount, Chain Mount |
| Product Dimensions (L x W x H) | 24.02 in x 1.57 in x 1.57 in |
| Product Weight (per light) | 1 lb (approx. 0.45 kg) |
| Certifications | cUL Listed |
| Indoor/Outdoor Usage | Indoor |
| Control Method | App, Push Button |
5. Setup and Installation
Before installation, ensure the power supply is disconnected at the circuit breaker.
5.1 Mounting Options
The LED strip light can be installed using either flush mount or chain mount methods. Both options utilize the provided mounting hardware.
Image 5.1: Example of two LED strip lights chain-mounted in a workshop setting, providing illumination over a workbench.
5.2 Flush Mount Installation
- Mark the desired mounting location on the ceiling or wall.
- Position the mounting clips (Image 3.1) and mark the screw holes.
- Drill pilot holes and insert wall anchors if necessary.
- Secure the mounting clips with the provided screws.
- Snap the LED strip light into the secured mounting clips.
Image 5.2: Underside view of the LED strip light, highlighting the integrated mounting channels and connection points for installation.
5.3 Chain Mount Installation
- Attach appropriate chains (not included) to the designated hanging points on the fixture (refer to Image 5.1 for example).
- Secure the chains to a sturdy overhead structure.
- Ensure the fixture is level and securely suspended.
5.4 Linking Multiple Fixtures
Use the provided linking cord to connect multiple LED strip lights end-to-end for continuous illumination. Ensure the total wattage of linked fixtures does not exceed the circuit's capacity.
Image 5.3: Close-up view demonstrating how two LED strip lights connect end-to-end using the linking cord for extended coverage.
After mounting and linking (if applicable), plug the fixture(s) into a standard electrical outlet.
6. Operating Instructions
The Commercial Electric LED Strip Light operates via a standard plug-in connection. Once plugged into a power source, the light can be controlled by an external switch, a compatible dimmer switch, or potentially via an app (refer to product specifications for details on app control compatibility, if applicable).
- Power On/Off: Use the wall switch connected to the outlet or any integrated push button switch on the fixture.
- Dimming: This fixture is dimmable. Use a compatible LED dimmer switch for adjustable brightness. Refer to your dimmer switch's instructions for proper operation.
7. Maintenance
The integrated LED technology in this fixture requires minimal maintenance.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- LED Replacement: The LEDs are integrated and designed for long life. They are not user-replaceable.
- Heat Output: The fixture produces virtually no added heat, contributing to its longevity and energy efficiency.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check power connection, wall switch, and circuit breaker. Ensure the fixture is securely plugged in. |
| Light flickers or dims improperly. | Incompatible dimmer switch or loose connection. | Ensure a compatible LED dimmer switch is used. Check all electrical connections for tightness. |
| Fixture is damaged. | Physical damage. | Do not attempt to repair. Contact customer support for assistance. |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact Commercial Electric customer service. Keep your purchase receipt for warranty claims.
Manufacturer: Commercial Electric
Model: CE-2FH-100W-2PACK
