Introduction
This manual provides instructions for the setup, operation, and maintenance of your DigiTech 2-Tech WD-4379 Digital Alarm Clock. Please read these instructions carefully before using the product.
The DigiTech 2-Tech WD-4379 is a portable, battery-powered alarm clock featuring an analog display with a Pinocchio dial. Its compact design makes it suitable for various indoor settings, including bedrooms and travel.
Package Contents
- DigiTech 2-Tech WD-4379 Digital Alarm Clock
- Service Card
Note: One AA battery is required and not included in the package.
Setup
1. Battery Installation
- Locate the battery compartment cover on the back of the alarm clock.
- Gently slide or unclip the cover to open it.
- Insert one (1) AA battery, ensuring the polarity (+ and -) matches the indicators inside the compartment.
- Replace the battery compartment cover, ensuring it is securely closed.
Image: Back view of the alarm clock, illustrating the battery compartment and setting controls. The model number "DIGI-TECH REF WD-4379" is visible.
2. Setting the Time
- Locate the time setting knob on the back of the clock (usually labeled "TIME SET" or similar).
- Rotate the knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
Operating Instructions
1. Setting the Alarm
- Locate the alarm setting knob on the back of the clock (usually labeled "ALARM SET" or similar).
- Rotate the alarm setting knob to move the alarm hand to your desired alarm time.
- Ensure the alarm ON/OFF switch (if present) is in the "ON" position.
2. Turning the Alarm On/Off
- To activate the alarm, slide the alarm switch (often located on the side or back) to the "ON" position.
- To deactivate the alarm, slide the alarm switch to the "OFF" position.
- To temporarily stop a sounding alarm, press the snooze button (if available, typically on top). The alarm will sound again after a few minutes.
Maintenance
Cleaning
- Wipe the clock's exterior with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish.
Battery Replacement
When the clock's display dims or the alarm sound weakens, it is time to replace the battery. Follow the "Battery Installation" steps in the Setup section to replace the AA battery.
Troubleshooting
- Clock not working: Ensure the AA battery is inserted correctly with the correct polarity and is not depleted. Replace the battery if necessary.
- Alarm not sounding: Check that the alarm is set to the desired time and the alarm ON/OFF switch is in the "ON" position. Ensure the battery has sufficient power.
- Incorrect time display: Adjust the time using the time setting knob on the back of the clock.
Specifications
| Feature | Detail |
|---|---|
| Brand | DigiTech |
| Model | 2-Tech WD-4379 |
| Color | Blue (Pinocchio dial) |
| Display Type | Analog |
| Style | Modern |
| Special Feature | Alarm |
| Power Source | Battery Powered (1x AA, not included) |
| Room Type | Bedroom |
| Shape | Round |
| Usage | Indoor |
| Material | Plastic |
| Dimensions (L x W x H) | 100 mm x 40 mm x 100 mm |
| Weight | 100 g |
Warranty Information
This product comes with a standard manufacturer's warranty. Please refer to the service card included in your package for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.
Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact DigiTech customer support. Contact details can typically be found on the product packaging or the official DigiTech website.
