ROCKPOINT HX2026-44
ROCKPOINT 58-Inch Farmhouse TV Stand with Sliding Barn Doors Instruction Manual
Model: HX2026-44
Introduction
Thank you for choosing the ROCKPOINT 58-Inch Farmhouse TV Stand. This entertainment center is designed to accommodate TVs up to 65 inches, offering a sturdy tabletop with a load-bearing capacity of up to 360 pounds. It features two smooth-sliding barn doors, six storage compartments with adjustable shelves, and a convenient backboard hole for wire management. This manual provides essential information for assembly, operation, maintenance, and safety to ensure proper use and longevity of your product.
Safety Information
Tip Over Hazard: To prevent injury, use anchors to secure the TV stand to the wall. Do not place the unit on unstable surfaces. Ensure the load on the tabletop and shelves does not exceed the specified weight limits. Keep the TV stand away from direct heat sources. Small parts may be present during assembly; keep them out of reach of children.
Specifications
| Feature | Detail |
|---|---|
| Brand | ROCKPOINT |
| Model Number | HX2026-44 |
| Color | Espresso |
| Dimensions (L x D x H) | 58 inches x 15.4 inches x 30.6 inches |
| TV Size Compatibility | Up to 65 inches |
| Top Table Load Capacity | 360 pounds |
| Item Weight | 82 pounds |
| Number of Shelves | 6 (adjustable) |
| Material Type | Engineered Wood |
| Included Components | Instruction manual, hardware, panels |
Setup and Assembly
Your ROCKPOINT TV stand comes with all necessary hardware and a detailed instruction manual. Please follow the step-by-step instructions provided in the included manual for proper assembly. Ensure all parts are accounted for before beginning assembly. A second person may be helpful for certain steps.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Identify Parts: Refer to the parts list in your included manual to identify each component.
- Follow Step-by-Step Instructions: Assemble the unit according to the numbered steps in the provided assembly guide.
- Secure Connections: Ensure all screws and fasteners are tightened securely, but do not overtighten.
- Wall Anchoring: For safety, use the provided wall anchoring hardware to secure the TV stand to a wall, preventing tip-over accidents.
Image: Product dimensions and TV size compatibility. Note: The image indicates a 150 lbs weight capacity, but the product specifications state 360 lbs. Please refer to the product specifications for the accurate weight capacity.
Image: Details of the adjustable shelf, crown molding, and stable base, highlighting key structural features.
Operating Instructions
- Sliding Barn Doors: The two barn-style doors are designed to slide smoothly along the top metal tracks. Gently push or pull the doors using the handles to open or close the compartments. The flexible design allows you to cover either the central open shelves or the side cabinets as needed.
- Adjustable Shelves: The interior shelves are adjustable to accommodate items of various sizes. To adjust a shelf, remove any items, lift the shelf, and reposition the shelf pins into the desired holes. Ensure all four pins are securely in place before placing items back on the shelf.
- Cable Management: Utilize the pre-drilled cable hole on the back panel to route and organize power cords and media cables from your TV, game consoles, and other devices. This helps prevent tangling, promotes heat dissipation, and maintains a tidy appearance.
Image: Features such as the cable management hole, smooth sliding door mechanism, and ergonomic handles.
Video: An overview of the ROCKPOINT 58-inch TV Stand, demonstrating its features including the sliding barn doors and storage capabilities.
Maintenance
To maintain the appearance and longevity of your TV stand, wipe it with a damp cloth as needed. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish. Regularly check all fasteners to ensure they remain tight. If any part becomes loose, tighten it immediately.
Troubleshooting
- Doors Not Sliding Smoothly: Check the metal tracks for any obstructions or debris. Ensure the doors are properly aligned on the tracks. If necessary, clean the tracks with a soft, dry cloth.
- Unit Feels Unstable: Verify that all assembly screws are securely tightened. Ensure the TV stand is placed on a level surface. Re-check the wall anchoring system to confirm it is properly installed and secure.
- Damaged or Missing Parts: If you encounter any damaged or missing parts during assembly, please contact customer support immediately for assistance. Do not attempt to assemble the unit with damaged or missing components.
Warranty and Support
For warranty information or any product-related inquiries, please contact ROCKPOINT customer support. You can find more information and contact details by visiting the official ROCKPOINT store on Amazon: Visit the ROCKPOINT Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.