SENLAN RS-10B

SENLAN RS-10B LED Par Bar Wall Wash Stage Light User Manual

Welcome

Thank you for purchasing the SENLAN RS-10B LED Par Bar Wall Wash Stage Light. This manual provides essential information for the safe and efficient operation of your new lighting fixture. Please read these instructions thoroughly before use and retain them for future reference.

Safety Instructions

To ensure safe operation and prolong the lifespan of your device, please observe the following safety precautions:

  • Power Supply: Ensure the power supply voltage matches the specified AC90V-240V/50-60Hz.
  • Grounding: Always connect the device to a grounded power outlet to prevent electrical shock.
  • Ventilation: Do not obstruct ventilation openings. Ensure adequate airflow around the unit to prevent overheating.
  • Moisture: Keep the device away from water, high humidity, and damp environments.
  • Temperature: Avoid operating the device in extremely high or low temperatures.
  • Handling: Handle the device with care. Avoid dropping or subjecting it to strong impacts.
  • Servicing: Do not attempt to repair or modify the device yourself. Refer all servicing to qualified personnel.
  • Eye Protection: Avoid direct eye exposure to the light source, as it can be intense.

Package Contents

Please check that all items listed below are included in your package:

  • 1 x SENLAN RS-10B LED Par Bar Wall Wash Stage Light
  • 1 x Power Cable
  • 1 x User Manual (This Document)
  • 1 x Spare 3A Fuse

Product Overview

The SENLAN RS-10B is a versatile LED Par Bar Wall Wash Stage Light designed for various applications, including disco, parties, and theater. It features 8 powerful 3W RGB 3-in-1 LEDs housed in a durable full aluminum casing, ensuring efficient cooling without a fan for silent operation. The unit offers multiple control modes and a digital LED display for easy configuration.

Key Features

  • Light Source: 8pcs x 3W RGB 3-in-1 LEDs with 25-degree acrylic lenses.
  • Housing: Full aluminum construction for silent, fan-less cooling.
  • Control Modes: DMX512, Automatic Operation, Sound Activation, Master/Slave.
  • DMX Channels: 7 different DMX modes, allowing individual LED control.
  • Effects: 24 different automatic "run water" effects.
  • Display: Digital LED display for manual color selection (0-255 for each RGB component) and mode configuration.
  • Dimming: 0-100% electronic dimming.
  • Power: AC90V-240V/50-60Hz, 40W wattage.
  • Fuse: Integrated fuse holder with a replaceable 3A fuse.

Product Diagram

Below is an image illustrating the rear panel of the SENLAN RS-10B LED Par Bar, showing its connections and display.

Rear view of SENLAN RS-10B LED Par Bar showing DMX In/Out, power input, and digital display.

Image: Rear panel of the SENLAN RS-10B LED Par Bar, highlighting the DMX input/output ports, power connection, and the digital control display with menu buttons.

Setup

Mounting

The SENLAN RS-10B LED Par Bar can be mounted in various positions using its adjustable brackets. Ensure the mounting surface or truss is capable of supporting the weight of the fixture (approximately 1.1 kg / 2.4 lbs). Always use appropriate clamps and safety cables when suspending the unit.

Power Connection

  1. Verify that the local power supply voltage matches the requirements of the fixture (AC90V-240V/50-60Hz).
  2. Connect the provided power cable to the power input on the rear of the unit.
  3. Plug the other end of the power cable into a grounded electrical outlet.

DMX Connection (Optional)

For DMX512 control, connect the fixture to a DMX controller and other DMX-compatible devices:

  1. Connect the DMX output of your DMX controller to the DMX IN port of the first fixture using a 3-pin DMX cable.
  2. To connect multiple fixtures, link the DMX OUT port of the first fixture to the DMX IN port of the next fixture in a daisy chain.
  3. Ensure the last fixture in the DMX chain has a DMX terminator connected to its DMX OUT port to prevent signal reflection.

Operating Modes

The SENLAN RS-10B offers four primary control modes, accessible via the digital LED display and menu buttons on the rear panel.

Digital LED Display and Menu Navigation

The digital LED display shows the current mode and settings. Use the menu buttons (MENU, UP, DOWN, ENTER) to navigate and adjust parameters:

  • MENU: Cycles through the main menu options.
  • UP/DOWN: Adjusts values or navigates within a menu option.
  • ENTER: Confirms a selection or saves a setting.

DMX512 Control

This mode allows external control of the fixture's functions using a DMX512 controller. The fixture supports 7 different DMX modes, enabling individual control over each LED's color and intensity.

  1. Set the desired DMX address for the fixture using the digital display. Refer to the DMX Channel Chart in the Specifications section for channel assignments.
  2. Ensure the DMX cables are correctly connected as described in the Setup section.
  3. Control the light's parameters (color, dimming, effects) from your DMX controller.

Automatic Operation

The fixture features 24 different pre-programmed automatic "run water" effects. These effects can be selected and run without an external controller.

  1. Navigate to the automatic mode setting on the digital display.
  2. Use the UP/DOWN buttons to cycle through the 24 available automatic programs.
  3. Press ENTER to select and activate a program.

Sound Activation

In sound activation mode, the light reacts to ambient sound, creating dynamic lighting effects synchronized with music or other audio. This mode can also be combined with the automatic "run water" effects.

  1. Select the sound activation mode from the digital display.
  2. The fixture will now respond to sound input via its built-in microphone.
  3. Adjust the sound sensitivity if available, or experiment with placement relative to the sound source.

Master/Slave Mode

This mode allows multiple fixtures to operate in synchronization without a DMX controller. One fixture acts as the "Master" and controls all "Slave" fixtures.

  1. Connect the DMX OUT of the Master fixture to the DMX IN of the first Slave fixture. Continue daisy-chaining all Slave fixtures.
  2. Set the first fixture to "Master" mode using its digital display.
  3. Set all subsequent fixtures to "Slave" mode.
  4. The Master fixture's settings (e.g., automatic programs, sound activation) will now be replicated across all Slave fixtures.

Color Mixing and Dimming

The 3-in-1 RGB LEDs allow for a wide spectrum of colors. The digital display offers a "Mixology" feature to manually select specific color shades.

  • Navigate to the color mixing settings on the digital display.
  • Adjust the intensity of Red, Green, and Blue components individually from 0-255 to create custom colors.
  • The overall brightness can be adjusted using the 0-100% dimmer function.

Light Effect Demonstrations

The following images demonstrate various color outputs and effects achievable with the SENLAN RS-10B LED Par Bar.

Two SENLAN LED Par Bars projecting red and green light onto a wall.
Image: Two light bars displaying alternating red and green beams on a wall.
Two SENLAN LED Par Bars projecting red light onto a wall.
Image: Two light bars displaying solid red beams on a wall.
Two SENLAN LED Par Bars projecting purple light onto a wall.
Image: Two light bars displaying solid purple beams on a wall.
Two SENLAN LED Par Bars projecting red and yellow light onto a wall.
Image: Two light bars displaying red and yellow beams, creating a warm wash effect.
Two SENLAN LED Par Bars projecting red and green light onto a wall with a wave effect.
Image: Two light bars displaying dynamic red and green wave effects on a wall.
Two SENLAN LED Par Bars projecting blue and red light onto a wall with a wave effect.
Image: Two light bars displaying dynamic blue and red wave effects on a wall.
Two SENLAN LED Par Bars projecting blue and yellow light onto a wall.
Image: Two light bars displaying blue and yellow beams on a wall.
Two SENLAN LED Par Bars projecting blue light onto a wall with a wave effect.
Image: Two light bars displaying dynamic blue wave effects on a wall.

The following videos demonstrate the various lighting effects and operational capabilities of the SENLAN RS-10B LED Par Bar.

Video: A demonstration of the RGB LED wall wash light displaying various color changes and patterns. The light bars are arranged in a triangular formation on the floor, projecting colors onto a wall.
Video: A demonstration showcasing the LED Par bar wall wash stage light's capabilities, including color mixing and dynamic effects. Two light bars are shown projecting various colors onto a wall.
Video: A detailed view of the LED Par bar wall wash stage light, demonstrating its physical features and various light outputs. The video includes a close-up of the unit and its projected light patterns.

Maintenance

Regular maintenance helps ensure optimal performance and longevity of your SENLAN RS-10B LED Par Bar.

  • Cleaning: Periodically clean the lenses and the exterior of the fixture with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
  • Inspection: Regularly inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
  • Fuse Replacement: The fixture includes a replaceable 3A fuse. If the unit fails to power on, check and replace the fuse if necessary. Always use a fuse of the correct rating.
  • Storage: When not in use for extended periods, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.

Troubleshooting

If you encounter issues with your SENLAN RS-10B, refer to the table below for common problems and solutions.

ProblemPossible CauseSolution
Fixture does not power on.No power supply; Blown fuse; Faulty power cable.Check power connection and outlet; Replace 3A fuse; Try a different power cable.
No DMX control.Incorrect DMX address; Faulty DMX cable; No DMX signal; Missing DMX terminator.Verify DMX address setting; Check DMX cable connections; Ensure DMX controller is active; Add a DMX terminator to the last fixture.
Lights flicker or behave erratically.DMX signal interference; Loose connections; Power fluctuations.Ensure DMX cables are properly shielded; Check all cable connections; Use a power conditioner if power is unstable.
Sound activation not working.Low sound input; Incorrect mode selected.Increase sound volume or move fixture closer to sound source; Verify sound activation mode is selected on the display.

Technical Specifications

FeatureDetail
Model NumberRS-10B
Light Source8pcs x 3W RGB 3-in-1 LED
Beam Angle25 Degrees
Control ModesDMX512, Automatic, Sound Activation, Master/Slave
DMX Channels7 Modes
Dimming0-100% Electronic Dimmer
VoltageAC90V-240V / 50-60Hz
Wattage40W
MaterialAluminum Housing, Acly/ABS Lenses
Product Dimensions20.08 x 2.76 x 3.94 inches (51 x 7 x 10 cm)
Item Weight2.4 pounds (1.09 kg)
Fuse3A
UPC192187124188

Warranty Information

SENLAN products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. Specific warranty terms and duration may vary by region and retailer. For detailed warranty information, please refer to the documentation provided at the time of purchase or contact customer support.

Customer Support

If you have any questions, require technical assistance, or need to report an issue with your SENLAN RS-10B LED Par Bar, please contact our customer support team. Provide your product model number (RS-10B) and a detailed description of the issue for prompt assistance.

For support, please visit the SENLAN brand page on Amazon: SENLAN Store on Amazon