Product Overview
The Eurofase 34166-017 LED Large Pendant is a modern lighting fixture designed for various indoor applications. It features an integrated LED light source, dimmable functionality, and a sleek satin nickel finish. This manual provides essential information for the safe installation, operation, and maintenance of your pendant light.
Figure 1: Front view of the Eurofase 34166-017 LED Large Pendant.
Safety Information
- Always turn off the main power supply at the circuit breaker before beginning installation or performing any maintenance.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all wiring connections are secure and comply with local electrical codes.
- Do not exceed the specified voltage (120 Volts) or wattage (3 watts).
- Handle glass components with care to prevent breakage.
- This product is designed for indoor use only.
Setup and Installation
The Eurofase 34166-017 LED Large Pendant requires semi-flush mount installation and assembly. Follow these general steps for proper setup:
- Unpack Contents: Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged.
- Prepare for Installation: Turn off power at the main circuit breaker. Ensure the mounting surface is clean, dry, and structurally sound.
- Mounting Bracket Installation: Attach the mounting bracket to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
- Wiring Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Ensure connections are tight and insulated.
- Fixture Assembly: Assemble the pendant light components as per the detailed instructions included in the product packaging. This typically involves attaching the pendant body to the canopy.
- Secure Fixture: Carefully push the wired connections into the junction box and secure the fixture canopy to the mounting bracket using the provided screws.
- Final Check: Ensure the fixture is firmly attached and all connections are secure.
Figure 2: Side view of the pendant light, showing its slender design.
Operating Instructions
Once installed, operating your Eurofase LED Large Pendant is straightforward:
- Power On: Restore power at the main circuit breaker.
- Turning On/Off: Use the wall switch or the remote control (if included with your specific model) to turn the light on or off. The control method is typically a push button.
- Dimming Function: This fixture is dimmable. If connected to a compatible dimmer switch, adjust the dimmer to achieve your desired brightness level. Ensure your dimmer switch is rated for LED lighting.
- Light Color: The pendant provides Daylight White light.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your pendant light:
- Cleaning: Before cleaning, ensure the power is turned off. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- LED Light Source: The integrated LED light source is designed for long life and does not require replacement under normal operating conditions. Do not attempt to replace the LED components yourself.
- Inspection: Periodically inspect the fixture for any loose connections or signs of wear. If any issues are found, turn off power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; loose wiring; faulty switch. | Check circuit breaker. Ensure all wiring connections are secure. Test the wall switch. |
| Light flickers or dims unexpectedly. | Incompatible dimmer switch; loose wiring; power fluctuations. | Ensure dimmer is LED compatible. Check wiring connections. Consult an electrician if power fluctuations persist. |
| Humming noise from fixture. | Incompatible dimmer switch. | Replace dimmer with a high-quality, LED-compatible dimmer. |
If troubleshooting steps do not resolve the issue, please contact customer support.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Eurofase |
| Model Name | 34166-017 |
| Light Source Type | LED |
| Wattage | 3 watts |
| Voltage | 120 Volts |
| Brightness | 250 Lumen |
| Color | Satin Nickel (Fixture), Frosted (Shade) |
| Material | Metal (Fixture), Glass (Shade) |
| Product Dimensions | 1"L x 1"W x 36"H |
| Item Weight | 2.07 pounds |
| Installation Type | Semi Flush Mount |
| Special Feature | Dimmable |
| Indoor/Outdoor Usage | Indoor |
| Light Color | Daylight White |
| Assembly Required | Yes |
| Specification Met | ETL |
Warranty Information
This Eurofase product comes with a Limited Manufacturer's Warranty. For specific details regarding the terms, conditions, and duration of your warranty, please refer to the warranty documentation included with your product packaging or visit the official Eurofase website. The warranty covers defects in materials and workmanship under normal use.
Customer Support
For any questions, technical assistance, or warranty claims, please contact Eurofase customer support. Our North America-based customer support team is available to provide fast and responsive service.
- Online Support: Visit the official Eurofase website for FAQs and support resources.
- Contact Information: Refer to your product packaging or the Eurofase website for current contact details (phone number, email).
We offer an extended 60-day return window for your confidence. Your satisfaction is our top priority.
