Muddy Pro-Cam 20 Game Camera User Manual

Introduction

The Muddy Pro-Cam 20 Trail Camera is designed to capture high-definition wildlife and wilderness video and still images with rapid response. It delivers high-quality 20 MP full-color images during the day and 5MP monochrome images at night, utilizing Invisible Flash technology with 36 HE LEDs. This manual provides comprehensive instructions for setting up, operating, and maintaining your Pro-Cam 20 to ensure optimal performance.

Figure 1: Front view of the Muddy Pro-Cam 20 Game Camera, showcasing its camouflage finish.

Safety Information

• Do not expose the camera to extreme temperatures or direct sunlight for prolonged periods.
• Ensure the battery compartment is sealed properly to prevent water ingress.
• Use only recommended battery types (6 AA batteries). Do not mix old and new batteries or different battery types.
• Keep the camera away from strong magnetic fields.
• Do not attempt to disassemble or modify the camera. This will void the warranty.
• Dispose of batteries according to local regulations.

Package Contents

Please check the package contents to ensure all items are present:

• Muddy Pro-Cam 20 Game Camera (1 unit)
• Adjustable strap with buckle for mounting (1 unit)
• User Manual (this document)

Note: SD card and AA batteries are not included and must be purchased separately.

Product Overview

Familiarize yourself with the key components of your Muddy Pro-Cam 20.

Figure 2: Internal view of the camera, displaying the backlit LCD screen and control panel.

• Lens: Captures images and videos.
• PIR Sensor: Passive Infrared sensor for motion detection.
• Invisible Flash LEDs (36 HE LEDs): Provides illumination for night images without visible light.
• Backlit LCD Screen: For easy setup and programming.
• Control Buttons: Navigation and selection buttons (M, OK, Up, Down, Left, Right).
• On/Off Switch: Powers the camera on or off.
• Battery Chamber: Holds 6 AA batteries.
• SD Card Slot: Accepts up to 32 GB SD card.
• 12V Power Port: For external power supply (not included).
• Padlock Loop: For theft deterrence.
• 1/4"-20 Tripod Mount: For mounting on a tripod or other compatible accessories.
• Cable Track: Guides mounting straps or cables.

Figure 3: Bottom view highlighting the battery chamber, power port, padlock loop, and tripod mount.

Figure 4: Side view illustrating the camera's dimensions and the cable track for mounting.

Setup

1. Battery Installation

1. Open the camera's front cover.
2. Locate the battery chamber at the bottom of the camera.
3. To open the battery chamber, press the chamber lightly and then slide the eject button.
4. Pull firmly to remove the chamber.
5. Insert 6 AA batteries, ensuring correct polarity (+/-).
6. Reinsert the battery chamber until it clicks securely into place.

2. SD Card Installation

1. With the camera open, locate the SD card slot on the side of the internal compartment.
2. Insert an SD card (up to 32 GB, not included) into the slot with the metal contacts facing down.
3. Push the card in until it clicks into place. To remove, push it in again until it springs out.

3. Mounting the Camera

The camera can be mounted using the included strap or a tripod.

• Strap Mounting: Thread the adjustable strap through the cable track slots on the back of the camera. Secure the camera to a tree or pole at the desired height and angle.
• Tripod Mounting: Use the 1/4"-20 tripod mount on the bottom of the camera to attach it to a compatible tripod or mounting arm.

4. Initial Setup (Date/Time)

1. Turn the camera ON using the switch inside the front cover.
2. The backlit LCD screen will illuminate.
3. Use the navigation buttons (Up, Down, Left, Right) to navigate through the menu options.
4. Press the M button to enter the menu.
5. Navigate to the "Date/Time" setting.
6. Use the Up/Down buttons to adjust values and Left/Right to move between fields.
7. Press OK to confirm settings.
8. Set other desired parameters such as Camera ID, Photo Burst, Video Length, etc.

Operating Instructions

1. Camera Modes

The Pro-Cam 20 supports various modes:

• Photo Mode: Captures still images.
  • Resolution: 20 MP (day), 5 MP (night).
  • Photo Burst: Optional 2 to 8 photos per trigger event.
  • Trigger Speed: 0.6 seconds.
• Video Mode: Records video clips with audio.
  • Resolution: 1280 x 720 HD or VGA (32 frames-per-second).
  • Video Length: 6 options from 5 to 10 minute spans.
• Time-Lapse Mode: Captures images at set intervals.
  • Period: Available 1, 2, 3, or 4 hours after sunrise and before dusk.
  • Custom: All day or custom start and end times available.

2. Detection and Flash Ranges

• Detection Range: Up to 70 ft.
• Flash Range (Night): Up to 60 ft.

3. Viewing Images/Videos

To view captured media:

1. Turn the camera ON.
2. Navigate to the "Playback" or "View" option in the menu.
3. Use the navigation buttons to scroll through images and videos.
4. Alternatively, remove the SD card and insert it into a computer or compatible device to view files.

Figure 5: Example images captured by the Pro-Cam 20, demonstrating its ability to capture wildlife in sequence.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the camera lens and body. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace all 6 AA batteries when the battery indicator is low. For optimal performance, use high-quality alkaline or lithium batteries.
• SD Card Management: Regularly format your SD card using the camera's menu option to ensure optimal performance and prevent data corruption. Back up important files before formatting.
• Storage: When not in use for extended periods, remove batteries and store the camera in a cool, dry place.

Troubleshooting

Specifications

Warranty and Support

For questions, technical support, or warranty information, please refer to the contact details provided on the product packaging or the manufacturer's official website.

As per the product information, you can visit GoMuddy.com for registration, tech support, FAQs, and to submit photos or purchase accessories. You may also call 844-745-7723 or 507-832-6322 for support.