Introduction
This manual provides instructions for the installation, operation, and maintenance of your Fluval Aquasky 2.0 Bluetooth LED Aquarium Light. The Aquasky 2.0 is designed to provide customizable lighting for freshwater and fish-only marine aquariums, featuring RGB and 6500K white LEDs, app control, and various lighting effects.
Safety Information
- Always disconnect the power supply before performing any maintenance or installation.
- Ensure the light fixture is securely mounted to prevent accidental submersion or falling into the aquarium.
- The unit is rated IP67 waterproof, meaning it can be safely mounted directly above the water surface. However, it is not designed for continuous submersion.
- Do not operate the light if any part is damaged, especially the power cord or LED array.
- This product is for indoor use only.
Package Contents
Verify that all components are present:
- Fluval Aquasky 2.0 LED Light Fixture (18W, 24-36 inch)
- Extendable Mounting Brackets
- Power Supply Unit
- Instruction Manual
Setup
1. Mounting the Light Fixture
The Fluval Aquasky 2.0 offers versatile mounting options:
- On Aquarium Rim: Attach the extendable mounting brackets to the light fixture. Adjust the brackets to fit the width of your aquarium rim. Ensure the light is centered and stable.
- Suspended Above Aquarium: A suspension kit (sold separately, e.g., Mounting Clips #14565 and Suspension Kit #14566) is required for this method. Follow the instructions provided with the suspension kit for secure installation.
Image: Mounting options for the Fluval Aquasky 2.0, illustrating both extendable brackets for rim mounting and a suspension method for hanging above the aquarium.
Image: Diagram highlighting key features such as IP67 waterproof rating, flexible positioning, extendable mounting brackets, and wide 120-degree light spread for uniform illumination.
2. Power Connection
Connect the power supply unit to the light fixture, then plug the power supply into a suitable electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
3. FluvalSmart App Installation and Pairing
The Fluval Aquasky 2.0 is controlled via the FluvalSmart App. Download the app from your device's app store (iOS or Android).
- Ensure Bluetooth is enabled on your smartphone or tablet.
- Open the FluvalSmart App.
- Follow the on-screen instructions to discover and pair your Aquasky 2.0 light fixture.
Image: A smartphone screen showing the FluvalSmart App, illustrating the interface for customizing light settings and schedules via Bluetooth.
Operating Instructions
The FluvalSmart App provides comprehensive control over your Aquasky 2.0 light.
1. Customizing the Light Spectrum
The light features RGB and 6500K white LEDs, allowing for a wide range of color combinations. Use the app to adjust individual color channels (Red, Green, Blue, White) to achieve desired lighting effects or replicate natural aquatic environments.
Image: Three aquarium scenes demonstrating the adjustable color spectrum, from warm red tones to cool blue-green and vibrant natural green settings.
2. Setting 24-Hour Light Cycles
Program a daily light cycle to mimic natural sunrise, midday, sunset, and night conditions. This promotes healthier behavior in fish and plants.
- Access the 24-hour cycle settings within the FluvalSmart App.
- Set specific times for sunrise (gradual increase), midday (peak brightness), sunset (gradual decrease), and night (low intensity or off).
- Adjust brightness and color for each phase of the cycle.
Image: A visual representation of the programmable 24-hour light cycle, depicting the transition from sunrise to midday, dusk, and night over an aquarium.
3. Activating Weather Effects
The app includes realistic weather effects to enhance your aquarium's environment.
- Navigate to the weather effects section in the FluvalSmart App.
- Select from options such as lightning storms, dense clouds, or seasonal shifts.
- Configure the intensity and duration of these effects as desired.
Image: App interface screenshots demonstrating the selection and scheduling of various weather effects, including sunrise/sunset simulations and dynamic cloud/storm patterns.
Maintenance
Cleaning the Light Fixture
Regular cleaning helps maintain optimal light output and extends the product's lifespan.
- Always unplug the light fixture from the power source before cleaning.
- Wipe the exterior of the light with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Ensure no water enters the electrical connections.
- The IP67 waterproof rating protects against splashes and temporary immersion, but proper care during cleaning is still recommended.
Troubleshooting
- Light Not Turning On: Check power connections. Ensure the power supply is plugged in and the outlet is functional. Verify the light is paired and enabled in the FluvalSmart App.
- App Connectivity Issues: Ensure Bluetooth is active on your device and the light is within range. Restart the app or your device. If issues persist, try re-pairing the light in the app settings.
- Inconsistent Light Routines: Confirm that the 24-hour cycle and weather effects are correctly programmed and saved within the FluvalSmart App. Ensure no other devices are interfering with the Bluetooth connection.
- Dim or Uneven Light: Clean the light fixture to remove any mineral deposits or debris that may obstruct light output.
For further assistance, refer to the FluvalSmart App's help section or contact Fluval customer support.
Specifications
Image: Detailed dimensions of the light fixture and a table outlining different Aquasky models, their sizes, and compatible aquarium widths.
| Feature | Detail |
|---|---|
| Model Number | 14532 |
| Wattage | 18 W |
| Extendable Size Range | 24 - 36 inches (61-91 cm) |
| LEDs | 42 (28 White, 14 RGB) |
| Lumens | 1250 lm |
| Color Temperature | 3000 - 25000 K |
| Lifetime | 50,000 hours |
| Product Dimensions | 5.5"D x 26"W x 2.75"H |
| Item Weight | 1.8 Pounds |
| Light Source Type | LED |
| Material | Plastic, Aluminum |
| Control Method | Bluetooth (via FluvalSmart App) |
| Waterproof Rating | IP67 |
| Voltage | 120 Volts |
| UPC | 015561145329 |
Image: A comprehensive table comparing different Fluval Aquasky 2.0 models, detailing their unique specifications such as wattage, lumen output, and LED configuration.
Warranty and Support
Warranty Information
This Fluval Aquasky 2.0 LED Aquarium Light comes with a 3-year limited warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.
Customer Support
For technical support, troubleshooting assistance, or warranty inquiries, please contact Fluval customer service. Refer to the Fluval website or product packaging for the most current contact information.
Official Product Videos
No official product videos were found in the provided data for embedding in this manual.
