LANOX Lubricant MX4-750 User Manual

Introduction

This user manual provides essential information for the safe and effective use of the INOX LANOX MX4-750 Lanolin Anti-Corrosion Lubricant. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

Image: The LANOX MX4-750 Lanolin Anti-Corrosion Lubricant is supplied in a 750ml bottle with a white spray nozzle. The label features the INOX logo, product name MX4 LANOX, and icons indicating its suitability for various applications including vehicles, heavy machinery, and boats.

Product Overview

LANOX MX4 is a heavy-duty, anti-corrosion lubricant made from lanolin. It is designed to protect metal surfaces from rust and corrosion, displace moisture, and provide long-lasting lubrication in various environments.

Key Features:

• Lanolin-based formula for superior anti-corrosion properties.
• Displaces moisture and penetrates rust.
• Non-conductive and non-toxic.
• Suitable for industrial, automotive, marine, and domestic applications.

Safety Information

Always handle chemical products with care. Refer to the product's Safety Data Sheet (SDS) for comprehensive safety information. Keep out of reach of children. Use in a well-ventilated area. Avoid prolonged skin contact. In case of eye contact, rinse thoroughly with water.

Setup and Preparation

1. Surface Preparation: Ensure the surface to be treated is clean and free from loose dirt or debris. For best results, remove any existing rust or scale if possible.
2. Shake Well: Before each use, shake the LANOX MX4 bottle thoroughly to ensure the product is well-mixed.
3. Nozzle Attachment: Ensure the spray nozzle is securely attached to the bottle.

Operating Instructions

LANOX MX4 can be applied by spraying, brushing, or dipping, depending on the application area and desired coverage.

1. Direct Spray Application: Hold the bottle approximately 6-12 inches (15-30 cm) from the surface and spray evenly. Ensure complete coverage for maximum protection.
2. Penetration: For seized parts or rusted components, apply a generous amount and allow time for the lubricant to penetrate. This may take several minutes to hours depending on the severity of corrosion.
3. Moisture Displacement: Apply directly to wet components to displace water and prevent further corrosion.
4. Lubrication: Apply to moving parts, hinges, chains, or bearings for effective lubrication.

Note: A thin, even coat is generally sufficient. Avoid excessive application unless specifically required for deep penetration.

Maintenance and Storage

• Nozzle Cleaning: After use, if the nozzle becomes clogged, remove it and rinse with warm water.
• Storage: Store the bottle upright in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cap is tightly closed to prevent evaporation.
• Shelf Life: LANOX MX4 has a long shelf life when stored correctly.

Troubleshooting

Specifications

• Product Name: LANOX Lubricant MX4
• Model Number: MX4-750
• Brand: INOX
• Volume: 750 Milliliters
• Item Weight: Approximately 1.59 Pounds (0.72 kg)
• Package Dimensions: 10.08 x 4.45 x 2.91 inches (25.6 x 11.3 x 7.4 cm)
• Primary Use: Anti-Corrosion, Lubrication, Moisture Displacement
• ASIN: B07B8WSCC7
• Date First Available: March 6, 2018

Warranty and Support

For information regarding product warranty, technical support, or further inquiries, please contact INOX directly or visit their official website. Contact details can typically be found on the product packaging or the manufacturer's website.

Manufacturer: INOX

Website: www.inoxmx.com (Note: This is a general example, please refer to the actual manufacturer's website for precise contact information.)