1. Introduction
This manual provides essential instructions for the safe and efficient use of your Paladone Boo Mini Lamp. Please read this guide thoroughly before operating the device and retain it for future reference.
Figure 1: Front view of the Paladone Boo Mini Lamp, unlit.
2. Safety Information
- This product is intended for indoor use only. Do not expose to water or high humidity.
- Keep out of reach of small children due to small parts and battery hazards.
- Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Insert batteries correctly, observing polarity (+/-).
- Remove exhausted batteries promptly.
- Do not attempt to disassemble or modify the lamp.
- Clean only with a dry, soft cloth. Do not use abrasive cleaners or solvents.
3. Package Contents
Verify that all items are present in the package:
- 1 x Paladone Boo Mini Lamp (Model PP4374NN)
Note: 3 x AAA batteries are required and not included.
Figure 2: The Paladone Boo Mini Lamp in its retail packaging.
4. Setup
4.1 Battery Installation
- Locate the battery compartment cover on the underside or back of the lamp base.
- Using a small Phillips head screwdriver (not included), carefully unscrew the battery compartment cover.
- Insert 3 new AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery compartment cover and secure it with the screw. Do not overtighten.
Figure 3: Side view of the lamp, indicating the location of the power switch and typical battery compartment area.
5. Operating Instructions
5.1 Turning On/Off
The Paladone Boo Mini Lamp features a push-button or touch control switch, typically located on the base of the unit. To operate:
- Press the power button once to turn the lamp ON.
- Press the power button again to turn the lamp OFF.
Figure 4: The Paladone Boo Mini Lamp illuminated.
6. Maintenance
6.1 Cleaning
To clean the lamp, ensure it is turned off and remove batteries if storing for extended periods. Wipe the surface with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or internal components.
6.2 Battery Replacement
When the light output becomes dim or the lamp stops functioning, it is time to replace the batteries. Follow the battery installation steps in Section 4.1.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Batteries are dead or incorrectly installed. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Light is dim. | Batteries are low. | Replace batteries with new AAA batteries. |
| Lamp flickers. | Loose battery connection or low batteries. | Check battery installation. Replace batteries if necessary. |
8. Specifications
| Model Number | PP4374NN |
| Product Dimensions (D x W x H) | 2.76" x 3.15" x 2.76" (approx. 7cm x 8cm x 7cm) |
| Item Weight | 2.82 ounces (approx. 0.08 kg) |
| Material | Plastic |
| Light Source Type | LED (Light Emitting Diode) |
| Power Source | 3 x AAA Batteries (not included) |
| Switch Type | Push Button / Touch Control |
| Indoor/Outdoor Usage | Indoor Only |
| Water Resistance Level | Not Water Resistant |
| Assembly Required | No |
Figure 5: Dimensions of the Paladone Boo Mini Lamp.
9. Warranty and Support
This product is covered by the manufacturer's standard warranty. For warranty claims, technical support, or further assistance, please refer to the contact information provided on the product packaging or visit the official Paladone website.
