Flysky FS-GT5 6CH AFHDS RC Transmitter with FS-BS6 Receiver User Manual

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Flysky FS-GT5 6CH AFHDS RC Transmitter and FS-BS6 Receiver. Designed for remote control cars and boats, this system offers advanced features for precise and reliable control.

Figure 1.1: Flysky FS-GT5 Transmitter and FS-BS6 Receiver with its packaging.

2. What's in the Box

Upon opening the package, you should find the following components:

• 1 x Flysky FS-GT5 Transmitter
• 1 x Flysky FS-BS6 Receiver
• 1 x Quick Start Guide (Manual)

Figure 2.1: The Flysky FS-GT5 Transmitter, FS-BS6 Receiver, and Quick Start Guide as typically found in the package.

3. Key Features

The Flysky FS-GT5 system incorporates several advanced features for enhanced control and user experience:

• 6-Channel Control: Provides versatile control options for various RC models.
• 2.4GHz AFHDS 2A System: Second-generation Automatic Frequency Hopping Digital System ensures strong anti-interference capabilities, stable signal, and rapid response.
• Antler-Lock Antenna: 180° adjustable antenna for optimal signal reception and easy portability.
• F.SAFE (Fail-Safe) Function: Unique fail-safe function for multiple channels, enhancing safety by returning servos to a preset position in case of signal loss.
• Sound and Vibration Alarm: Provides tactile and audible alerts for important system status changes.
• Colorful LED Light: Customizable LED lighting for visual feedback.
• 4 Crawling Modes: Offers specialized modes for RC crawlers, allowing for precise control in challenging terrains.
• ABS Function: Automatic Brake System for improved braking performance and control.
• Built-in Gyro Receiver (FS-BS6): The included receiver features a built-in gyroscope for vehicle stability, which can be switched on or off.
• Battery Compatibility: Supports both AA batteries and 2S lithium batteries for flexible power options.

Figure 3.1: The FS-GT5's core capabilities: Anti-interference, Fast, and Precise control.

Figure 3.2: Explanation of the AFHDS 2A system's unique identity and multiple frequency hopping for stable and reliable communication.

Figure 3.3: The 180° adjustable Antler-Lock antenna and the F.SAFE (Fail-Safe) function for enhanced safety.

4. Components and Controls Overview

Familiarize yourself with the various parts and controls of the FS-GT5 Transmitter and FS-BS6 Receiver.

Figure 4.1: Labeled diagram of the FS-GT5 Transmitter and FS-BS6 Receiver components.

Transmitter Components:

• Antenna: Transmits the control signal.
• Channel 5 & 6 Knobs: Proportional control for auxiliary channels.
• LCD Display: Shows model information, settings, and status.
• LED Indicator: Displays power and binding status.
• BIND Button: Used for pairing the transmitter with the receiver.
• NavKey (Rotary Encoder): Used to navigate menus and select options. Rotate to select, press to confirm.
• BACK/EXIT Button: Returns to the previous menu or exits current function.
• Power Switch: Turns the transmitter on/off.
• 3-Position Switch (Channel 4): Provides three distinct positions for auxiliary control.
• Steering D/R (Dual Rate): Adjusts the maximum steering angle.
• Throttle/Brake Trigger (Channel 2): Controls forward/reverse movement and braking.
• ST.TRIM (Steering Trim): Adjusts the neutral point of the steering servo.
• TH.TRIM (Throttle Trim): Adjusts the neutral point of the throttle servo.
• Button (Channel 3): Provides on/off control for auxiliary functions.
• Battery Compartment: Houses the power source for the transmitter.

Receiver Components (FS-BS6):

• Antenna: Receives signals from the transmitter.
• BIND/VCC Port: Used for binding and power input.
• CH1-CH6 Ports: Connectors for servos and other auxiliary devices.
• LED Indicator: Displays receiver status.

Figure 4.2: The FS-BS6 Receiver, showing its ports and compact design.

5. Setup and Binding

5.1. Battery Installation

The FS-GT5 Transmitter can be powered by 4 AA batteries or a 2S lithium battery.

1. Open the battery compartment cover located at the bottom of the transmitter.
2. Insert 4 AA batteries, ensuring correct polarity, or connect a fully charged 2S lithium battery to the designated connector.
3. Close the battery compartment cover securely.

Figure 5.1: Battery compartment and battery options for the FS-GT5.

5.2. Binding the Transmitter and Receiver

Binding is the process of linking the transmitter and receiver so they can communicate. This must be done before first use and after replacing either component.

1. Ensure the transmitter is powered off and the receiver is disconnected from power.
2. Connect the bind cable to the receiver's BIND/VCC port.
3. Connect the power supply to any other channel port on the receiver. The receiver's LED will flash rapidly, indicating it is in binding mode.
4. Press and hold the BIND button on the transmitter while turning on the power switch.
5. The transmitter's LED will flash slowly, then turn solid, indicating successful binding. The receiver's LED will also turn solid.
6. Release the BIND button on the transmitter and disconnect the bind cable from the receiver.
7. Power off both the transmitter and receiver.
8. Power on the transmitter first, then the receiver. The receiver's LED should turn solid, indicating a successful connection.

Note: If binding fails, repeat the steps. Ensure no other 2.4GHz devices are operating nearby during the binding process to avoid interference.

6. Operating Instructions

The FS-GT5 offers a range of adjustable settings and functions accessible via its LCD display and NavKey. Below are common operations and feature adjustments.

6.1. Basic Navigation and Display

The main interface displays information related to the model, such as transmitter voltage, function status, and more. Use the NavKey to navigate through menu options.

Figure 6.1: The display interface showing various settings and modes, including Crawling Mode and ABS Function.

6.2. Adjusting Settings (Example: D/R, EPA, ABS, SVC)

To adjust specific settings, navigate to the corresponding menu item using the NavKey and then modify the values.

• D/R (Dual Rate): Adjusts the maximum throw of the steering or throttle. Useful for fine-tuning control sensitivity.
• EPA (End Point Adjustment): Sets the maximum travel for each servo channel. Ensures servos do not over-travel and bind.
• ABS (Automatic Brake System): Configures the anti-lock braking function. This can prevent wheels from locking up during hard braking, improving control.
• SVC (Smart Vehicle Control): Adjusts the sensitivity of the built-in gyroscope for vehicle stability. Higher values provide more stabilization.
• CRAWL Mode: Selects specialized modes for crawler vehicles, optimizing control for low-speed, high-torque maneuvers.

Refer to the on-screen menu and the detailed manual for specific adjustment procedures for each function.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Flysky FS-GT5 system:

• Cleaning: Use a soft, dry cloth to clean the transmitter and receiver. Avoid using solvents or abrasive cleaners.
• Storage: Store the system in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
• Antenna Care: Handle the antenna carefully. Avoid bending it excessively or applying undue force, as this can damage the internal wiring.
• Battery Care: Always use recommended battery types. Ensure batteries are charged correctly and disposed of responsibly.

8. Troubleshooting

If you encounter issues with your FS-GT5 system, refer to the following common troubleshooting steps:

For more complex issues, consult the full manual or contact Flysky customer support.

9. Specifications

FS-GT5 Transmitter:

• Channels: 6
• Frequency: 2.4GHz
• Wireless Protocol: AFHDS 2A
• Power: < 20dBm
• Low Voltage Alarm: < 4.4V (AA battery) or < 7.2V (2S LiPo)
• Antenna Length: 26mm
• Display: 128x64 LCD with white backlight
• Online Update: Yes
• Range: > 200m (no ground interference)
• Working Current: 100-120mA
• Dimensions: 158x150x241mm
• Weight: 296g
• Country of Origin: China

FS-BS6 Receiver:

• Channels: 6
• Frequency: 2.4GHz
• Wireless Protocol: AFHDS 2A
• Power: < 20dBm
• Receiving Sensitivity: -95dBm
• Dimensions: 30x22x16mm
• Weight: 8g
• Built-in Gyro: Yes (Switchable)

10. Warranty and Support

Flysky products are manufactured to high-quality standards. For specific warranty information and support inquiries, please refer to the official Flysky website or contact their customer service directly. Keep your proof of purchase for any warranty claims.