1. Product Overview
The VEVA Advanced Filter Replacements are designed to maintain optimal air quality and vacuum performance. This pack includes premium activated carbon pre-filters, compatible with various vacuum and air purifier models.
- High-Quality & Efficient Performance: Captures unwanted particles and helps improve air quality.
- Ideal for Various Environments: Effectively traps odors from pets, cooking, and smoke, keeping living spaces fresh.
- Compatible & Precut Design: Specifically designed to fit Shark vacuum models NV350, NV358, NV360, UV440, Honeywell HPA200 air purifiers, and 853460008013 vacuums.
- Comprehensive Value Pack: Includes 6 premium activated carbon pre-filters (11.25" x 13.9" x 0.2").
- Boost Your Vacuum's Capabilities: Upgrades your vacuum cleaner for improved performance and a cleaner, healthier living environment.
Image 1.1: The VEVA Advanced Filter Replacements package, showing two HEPA filters and four foam/felt filters.
2. Important Safety Information
Please read all instructions before use. This product is a replacement filter and should be handled with care. Ensure your appliance is turned off and unplugged before attempting any filter replacement.
Legal Disclaimer: This is a generic product designed and engineered by VEVA. We are not affiliated with, sponsored by or associated with Shark. This is not a Shark OEM product and is not covered under any Shark manufacturer's warranty. The Shark, Navigator, and Lift-Away brand names and logos are the registered trademarks of their respective owners. Any use of the brand name or model designation for this product is made solely for purposes of demonstrating compatibility. VEVA offers discounted products that provide superb value on premium quality products but may not use identical materials as Shark and, therefore, cannot guarantee identical results, including with respect to filtration quality (e.g., pressure drop, airflow rate, and efficiency) or durability. VEVA packaging may vary.
3. Setup and Installation
Proper installation of your VEVA Advanced Filter Replacements is crucial for optimal performance. Refer to your appliance's original instruction manual for specific filter compartment locations.
3.1 Identifying Your Appliance Model
Locate the model number on your vacuum or air purifier. The VEVA filters are compatible with:
- Shark Navigator Lift Away Models: NV350, NV351, NV352, NV355, NV356, NV357, NV358, NV360, NV370, NV391, UV440, UV490, UV540
- Honeywell HPA200 Air Purifiers
- 853460008013 Vacuums
Image 3.1: Illustration indicating where to find the model number on a vacuum cleaner and a list of compatible models for VEVA filters.
3.2 Replacing Filters (General Steps)
- Power Off: Ensure your vacuum or air purifier is turned off and unplugged from the power outlet.
- Access Filter Compartment: Open the filter compartment(s) on your appliance. This usually involves releasing latches or opening a cover.
- Remove Old Filters: Carefully remove the old HEPA, foam, and felt filters. Dispose of them according to local regulations.
- Insert New Filters: Place the new VEVA foam and felt filters into their designated slots. Ensure they are seated correctly. Then, insert the new VEVA HEPA filter.
- Close Compartment: Securely close the filter compartment(s).
- Power On: Plug in and turn on your appliance.
Image 3.2: Visual representation of the benefits of VEVA Premium HEPA and Foam/Felt filters, highlighting improved air quality and vacuum motor protection.
4. Operating Instructions
Once the new filters are installed, your appliance is ready for operation. The VEVA filters are designed to work seamlessly with your compatible vacuum or air purifier to provide enhanced filtration.
4.1 Filter Functionality
- HEPA Filters: These filters capture small particles as tiny as 0.3 microns, including pollen, mold spores, bacteria, and germs, improving overall air quality.
- Foam and Felt Filters: These pre-filters protect your vacuum motor by capturing larger dust, dirt, and small particles, extending the life of the HEPA filter and maintaining suction performance.
Image 4.1: An infographic illustrating the key advantages of VEVA filters, including their ability to provide clean air, enhance suction, capture microparticles, and their broad compatibility.
5. Maintenance
Regular maintenance of your VEVA filters ensures continued high performance and extends the lifespan of your appliance.
5.1 Cleaning Foam and Felt Filters
The foam and felt pre-filters are washable. Follow these steps:
- Remove the foam and felt filters from the appliance.
- Rinse them under lukewarm water until the water runs clear.
- Gently squeeze out excess water.
- Allow the filters to air dry completely for at least 24 hours before reinserting them. Do not use a dryer or heat source.
5.2 HEPA Filter Replacement
HEPA filters are not washable and should be replaced periodically. The frequency depends on usage and environmental factors. It is recommended to replace the HEPA filter every 6-12 months for optimal performance.
Image 5.1: A comparison graphic showing the superior qualities of VEVA filters (thick, super absorbent, antibacterial, perfect fit, supports suction, easy removal) versus other filters (thinner, non-absorbent, discolored, incorrect size, reduced suction).
6. Troubleshooting
If you experience issues after replacing your filters, consider the following:
- Reduced Suction:
- Ensure all filters are correctly seated and the filter compartment is securely closed.
- Check if the foam and felt filters are clean and completely dry.
- The HEPA filter might need replacement if it's old or heavily soiled.
- Unusual Odors:
- Ensure foam and felt filters are completely dry before reinstallation to prevent mildew.
- Replace activated carbon pre-filters more frequently in environments with strong odors (pets, cooking, smoke).
- Filters Not Fitting:
- Double-check your appliance model number against the compatible models listed in Section 3.1.
- Ensure filters are oriented correctly according to your appliance's design.
7. Specifications
| Brand | VEVA |
| Model Number | 43486-625 |
| Material Type | Charcoal |
| Item Weight | 1.03 pounds |
| Product Dimensions | 11.25"L x 0.2"W x 13.9"H |
| Compatible Devices | Shark Navigator Lift Away Models NV350, 351, 352, 355, 356, 357, 358, 360, 370, 391, UV440, 490, 540; Honeywell HPA200; 853460008013 Vacuums |
| Reusability | Foam/Felt filters are reusable (washable); HEPA filters are not reusable. |
8. Warranty and Support
For warranty information or customer support regarding your VEVA Advanced Filter Replacements, please refer to the official VEVA website or contact their customer service directly. While specific warranty details are not provided in this manual, VEVA is committed to customer satisfaction.
You can visit the VEVA Store on Amazon for more information and to contact support.
