Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your WOFI Ceiling Light Glam 1flg, Model 9135.01.70.7000. Please read this manual carefully before installation and use to ensure safe and efficient operation. Keep this manual for future reference.
Image: WOFI Ceiling Light Glam 1flg, showcasing its round, silver-colored frame and sparkling LED diffuser.
Important Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician or in accordance with local electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- Product Use: This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Handling: Handle the light fixture with care to avoid damage. Do not apply excessive force.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Light Source: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the LED module.
Package Contents
Verify that all components are present before beginning installation:
- 1 x WOFI Ceiling Light Glam 1flg (Model 9135.01.70.7000)
- 1 x Remote Control (requires 2 AAA batteries, included)
- Mounting Hardware (screws, anchors)
- Instruction Manual
Setup and Installation
- Prepare for Installation:
- Ensure the power supply to the installation area is turned off at the main circuit breaker.
- Unpack all components and inspect for any damage.
- Mounting the Fixture:
- Identify the mounting location on the ceiling.
- Secure the mounting bracket (if separate) to the ceiling using the provided screws and anchors. Ensure it is firmly attached to a structural element.
- Connect the electrical wires from the ceiling to the fixture's wires according to standard wiring practices (Live to Live, Neutral to Neutral, Ground to Ground). Ensure all connections are secure.
- Carefully attach the light fixture to the mounting bracket, ensuring it is flush with the ceiling and securely fastened.
- Power On:
- Once the fixture is securely installed and wired, restore power at the main circuit breaker.
- Test the light using the remote control.
Image: The WOFI Ceiling Light Glam 1flg mounted on a ceiling, demonstrating its sleek, low-profile design.
Operating Instructions
The WOFI Ceiling Light Glam 1flg is operated using the included remote control.
- Remote Control Setup:
- Insert the two AAA batteries into the remote control, observing correct polarity.
- Turning On/Off:
- Press the ON/OFF button to switch the light on or off.
- Adjusting Color Temperature:
- Use the dedicated buttons on the remote control to cycle through different color temperatures (e.g., warm white, neutral white, cool white). Refer to the remote control's markings for specific functions.
- Dimming Function:
- The remote control allows for dimming the light intensity. Use the + and - buttons (or similar) to increase or decrease brightness.
- Night Light / Sleep Function:
- Activate the night light or sleep function using the corresponding button on the remote control. This typically sets the light to a very low brightness level suitable for ambient lighting.
Image: The WOFI Ceiling Light Glam 1flg illuminated with a warm light setting, demonstrating its adjustable color temperature feature.
Maintenance
- Cleaning: Before cleaning, ensure the light fixture is turned off and cool. Use a soft, dry, lint-free cloth to wipe the surface. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or electrical components.
- LED Module: The integrated LED module is designed for long-term use and does not require replacement. Do not attempt to open or service the LED components.
- Remote Control Batteries: Replace the AAA batteries in the remote control when its range or responsiveness decreases. Dispose of used batteries responsibly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Remote control batteries are dead. Wiring issue. | Check circuit breaker. Replace remote control batteries. Verify wiring connections (consult a qualified electrician if unsure). |
| Light flickers or dims unexpectedly. | Unstable power supply. Loose wiring connection. Remote control interference. | Check household electrical system. Inspect and secure wiring connections. Ensure no obstructions between remote and light. |
| Remote control not responding. | Dead batteries. Out of range. Interference. | Replace batteries. Move closer to the light fixture. Remove any objects blocking the signal path. |
Specifications
| Feature | Detail |
|---|---|
| Brand | WOFI |
| Model Number | 9135.01.70.7000 |
| Type | Ceiling Light |
| Style | Round |
| Color | Silver |
| Material | Aluminium, Metal, Plastic |
| Light Source | Integrated LED |
| Number of Lights | 1 |
| Wattage | 138 Watts |
| Luminous Flux | 3100 Lumen |
| Color Rendering Index (CRI) | 80 |
| Average Life | 20000 Hours |
| EU Energy Efficiency Label | A+ |
| Area Lighting Classification | IP20 |
| Product Dimensions (L x W x H) | 60 x 60 x 90 cm |
| Item Weight | 5.12 Kilograms |
| Power Source | Mains Powered |
| Control Method | Remote Control |
| Batteries Required for Remote | 2 AAA (Included) |
Image: EU Energy Efficiency Label for the WOFI Ceiling Light Glam 1flg, indicating an A+ rating.
Warranty and Support
For warranty information and technical support, please refer to the official WOFI website or contact your retailer. Keep your purchase receipt as proof of purchase.
Manufacturer: WOFI Leuchten Wortmann & Filz GmbH
