Nespresso Lattissima Touch Espresso Machine by De'Longhi (Model EN560S) User Manual

Introduction

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Nespresso Lattissima Touch Espresso Machine by De'Longhi, Model EN560S. This machine is designed to prepare a variety of coffee and milk-based beverages, including Espresso, Lungo, Cappuccino, Latte Macchiato, and warm milk froth, using Nespresso OriginalLine capsules.

Image: The Nespresso Lattissima Touch Espresso Machine in Frosted Silver, featuring the main unit and integrated milk frother.

Safety Instructions

Please read all safety instructions carefully before using the appliance to prevent personal injury or damage. Keep this manual for future reference.

• Electrical Safety: Ensure the voltage rating on the appliance matches your local power supply. Do not immerse the machine, power cord, or plug in water or other liquids. Unplug the machine before cleaning and when not in use for extended periods.
• Hot Surfaces and Liquids: The machine produces hot water and steam. Exercise caution to avoid burns. Do not touch hot surfaces during operation.
• Children and Vulnerable Persons: This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Keep out of reach of children.
• Maintenance: Do not attempt to repair or modify the appliance yourself. Contact authorized service personnel for any repairs.

Product Overview

Familiarize yourself with the components of your Lattissima Touch machine.

• Water Tank: Removable tank for fresh water.
• Capsule Container: Collects used Nespresso capsules.
• Milk Frother System: Integrated unit for frothing fresh milk. Features a texture regulator knob.
• Control Panel: Illuminated buttons for various coffee and milk recipes (Ristretto, Espresso, Lungo, Hot Milk, Cappuccino, Latte Macchiato).
• Coffee Outlet: Where the brewed coffee dispenses.
• Milk Spout: Where frothed milk dispenses.
• Drip Tray: Adjustable and removable for different cup sizes.

Setup

Before first use, follow these steps to prepare your machine.

1. Unpacking: Remove all packaging materials and place the machine on a clean, stable, and level surface.
2. Rinsing: Fill the water tank with fresh drinking water. Place a container under the coffee outlet. Turn on the machine and run a few cycles of Lungo without a capsule to rinse the internal system.
3. Milk Frother Assembly: Ensure the milk frother components are correctly assembled and attached to the machine.
4. Water Hardness Setting: It is recommended to set the water hardness according to your local water supply for optimal descaling alerts. Refer to the full manual for detailed instructions on this setting.

Operating

Your Lattissima Touch offers a variety of one-touch beverage preparations.

Preparing Coffee (Espresso, Lungo, Ristretto)

1. Fill the water tank with fresh water.
2. Turn on the machine. Wait for the lights to stabilize.
3. Lift the lever and insert a Nespresso OriginalLine capsule. Close the lever.
4. Place a cup under the coffee outlet.
5. Press the desired coffee button (Ristretto, Espresso, or Lungo). The machine will brew and automatically eject the used capsule into the container.

Preparing Milk-Based Beverages (Cappuccino, Latte Macchiato, Hot Milk)

1. Fill the water tank with fresh water.
2. Fill the milk container with fresh, cold milk (whole milk or 2% milk with higher protein content is recommended for best froth). Attach the milk container to the machine.
3. Adjust the milk froth texture regulator knob to your preference.
4. Lift the lever and insert a Nespresso OriginalLine capsule (for Cappuccino/Latte Macchiato). Close the lever.
5. Place an appropriate cup under the milk spout and coffee outlet.
6. Press the desired milk beverage button (Cappuccino, Latte Macchiato, or Hot Milk). The machine will automatically prepare the beverage.

Programming Cup Sizes

The machine allows you to program the volume for each of the six beverage buttons. To program, press and hold the desired button until the desired volume is reached, then release. The machine will remember this setting for future use.

Maintenance

Regular cleaning and descaling ensure optimal performance and longevity of your machine.

Daily Cleaning

• Drip Tray and Used Capsule Container: Empty and rinse daily.
• Exterior: Wipe with a damp cloth. Do not use abrasive cleaning agents.

Milk System Cleaning

• After Each Milk Preparation: Turn the milk froth regulator knob to the "Clean" position and press any milk button to rinse the system. This helps prevent milk residue buildup.
• Weekly Deep Clean: Disassemble all components of the milk frother system. Wash them thoroughly with warm soapy water or place them on the top rack of a dishwasher. Ensure all milk residue is removed from the internal parts, especially the froth regulator knob and its spring-loaded receptacle, to prevent blockages and malfunction.
• Storing Milk Container: The milk container can be stored in the refrigerator with milk, but it is recommended to remove the top frother mechanism before storage.

Descaling

The machine features an intuitive descaling function that alerts you when descaling is required, based on your programmed water hardness setting. Follow the instructions provided by the machine's indicators and use a Nespresso-approved descaling solution. The pluggable descaling pipe simplifies the process.

Troubleshooting

Refer to this section for common issues and their potential solutions.

• No Coffee Dispensing: Check water tank level, ensure capsule is correctly inserted, and machine is heated.
• No Milk Froth or Poor Quality Froth:
  • Ensure milk container is clean and all parts of the frother mechanism are free from dried milk residue.
  • Use fresh, cold milk. Higher protein milk (e.g., whole milk, 2%) generally froths better.
  • Check that the milk frother is correctly assembled and attached.
• Beverage Not Hot Enough: Pre-heat your cup with hot water. Ensure the machine has fully heated up before brewing.
• Machine Not Turning On: Check power connection and ensure the power outlet is functional.
• Descaling Light On: Perform the descaling procedure as indicated by the machine.

For more detailed troubleshooting, consult the comprehensive user manual or contact Nespresso customer support.

Specifications

Image: Dimensions of the Nespresso Lattissima Touch Espresso Machine, showing depth, width, and height.

Warranty and Support

For warranty information, product registration, or technical assistance, please contact Nespresso Customer Service. Details can typically be found on the Nespresso official website or within the packaging materials that came with your machine.

Nespresso provides excellent customer support for their products, including troubleshooting and assistance with parts or repairs.