1. Introduction
Thank you for choosing the Oasser P6 Portable Air Compressor Tire Inflator Pump. This device is designed for convenient and efficient inflation of various items, including car tires, bicycle tires, RV tires, and other inflatables. Its compact design, digital LCD, and LED light make it an essential tool for on-the-go inflation needs. Please read this manual thoroughly before operation to ensure safe and proper use.
2. Safety Information
- Always operate the air compressor in a well-ventilated area.
- Do not leave the inflator unattended while in use.
- Keep out of reach of children.
- Ensure the power source (12V DC) is compatible with the device.
- Avoid over-inflating. Always refer to the recommended pressure for your item.
- Do not operate if the device or power cord is damaged.
- Allow the unit to cool down after prolonged use to prevent overheating.
3. Package Contents
- Oasser P6 Air Compressor Tire Inflator Pump
- Power Cord
- Air Hose
- Nozzles (3 PCS Adaptor Kit)
4. Product Overview
Familiarize yourself with the components of your Oasser P6 Air Compressor:
Figure 4.1: Oasser P6 Air Compressor with labeled components and dimensions.
- Power Switch Button
- LED Light
- LED Switch Button
- 12V Plug With 2.8M Cord
- Pressure Valve
- Pressure Unit Switch (M button)
- Pressure Adjust Button (+/- buttons)
- Digital Display
Figure 4.2: LCD Digital Display and control buttons.
The LCD Digital Display allows you to select from 4 units (PSI, Bar, kPa, kg/cm²) and provides an accurate tire pressure gauge. It also supports preset tire pressure with auto-shutoff functionality.
Figure 4.3: Considerate Design with unique storage slots for the trachea (air hose).
Figure 4.4: Multifunction design for various inflatables, including the 3-piece adaptor kit.
Figure 4.5: Standard Schrader Valve connection with convenient buckle for fixing.
5. Setup & Operating Instructions
Follow these steps for proper setup and operation:
Figure 5.1: Visual guide for operating the Oasser P6 air compressor.
- Start the engine: For vehicle tires, ensure your vehicle's engine is running to provide stable power to the compressor.
- Plug in the power cord: Insert the 12V DC power cord into your car's cigarette lighter socket.
- Preset the tire pressure: Use the '+' and '-' buttons to set your desired tire pressure value on the digital LCD. Press the 'M' button to cycle through pressure units (PSI, Bar, kPa, kg/cm²).
- Connect the air hose: Connect the air hose to the tire valve. Press down the buckle on the Schrader valve connector to secure it. For other inflatables, use the appropriate adaptor nozzle from the kit.
- Press Power Button to inflate: Press the power switch button to begin inflation.
- Auto-Shutoff: The air compressor will automatically stop working once the preset tire pressure is reached.
Using the LED Light
The built-in LED light provides illumination for nighttime use or in low-light conditions.
Figure 5.2: High-brightness LED light for adequate illumination at night.
To turn the LED light on or off, press the LED Switch Button (labeled with a lightbulb icon) on the device.
Product in Use
Figure 5.3: The Oasser P6 in action, inflating a car tire.
The compact design allows for easy placement next to the tire during inflation.
Official Product Video
Video 5.1: Official product demonstration of the Oasser Air Compressor Tire Inflator Pump, showcasing its features and ease of use.
6. Maintenance
- Cleaning: Wipe the exterior of the air compressor with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is unplugged before cleaning.
- Storage: Store the air compressor in a cool, dry place away from direct sunlight and extreme temperatures. Utilize the integrated storage slots for the air hose to keep it tidy and prevent damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Compressor does not turn on. | No power from 12V socket; Blown fuse in car or compressor plug; Loose connection. | Check car's cigarette lighter fuse; Check compressor plug fuse; Ensure secure connection. |
| Slow inflation or no air output. | Air hose not properly connected; Leak in hose or valve; Item already at desired pressure. | Ensure secure connection to tire valve; Check for leaks; Verify current pressure reading. |
| Inaccurate pressure reading. | Sensor calibration issue; External factors (temperature). | Compare with a reliable external gauge; Ensure stable operating conditions. |
| Compressor overheats and shuts off. | Prolonged continuous use. | Allow the unit to cool down for 10-15 minutes before resuming operation. |
8. Specifications
- Brand: Oasser
- Model Name: P6
- Voltage: 12 Volts DC
- Max Pressure: 150 PSI
- Power Source: Corded Electric
- Noise Level: 65 dB
- Item Weight: 2.29 pounds
- Product Dimensions: 7.87 x 7.28 x 2.36 inches
- Hose Length: 20.87 Inches
- Material: Plastic
- Color: Red
- Recommended Uses: Tire Inflation
9. Warranty & Support
Oasser products are manufactured to the highest quality standards. For warranty information, technical support, or any inquiries regarding your Oasser P6 Air Compressor, please refer to the contact information provided on the product packaging or visit the official Oasser website. Please retain your proof of purchase for warranty claims.
