RCA RCRPST06GBE
RCA 6-Device Universal Remote (RCRPST06GBE) User Manual
Model: RCRPST06GBE
Introduction
This user manual provides comprehensive instructions for the RCA 6-Device Universal Remote, model RCRPST06GBE. It covers setup, operation, maintenance, and troubleshooting to help you maximize the functionality of your remote control. This remote is designed to consolidate control of up to six different audio/video devices, simplifying your home entertainment experience.
Product Overview

Figure 1: Front view of the RCA 6-Device Universal Remote. This image displays the full layout of the remote, including device selection buttons, navigation pad, numeric keypad, and media control buttons.
Setup
1. Battery Installation
The RCA 6-Device Universal Remote requires two AAA batteries (not included). Follow these steps to install them:
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Note: Always replace both batteries at the same time. Do not mix old and new batteries, or different types of batteries.
2. Programming the Remote
The universal remote can be programmed to control various devices. Refer to the specific programming instructions provided with your remote for detailed steps, as methods may vary (e.g., direct code entry, auto code search, brand code search). Generally, the process involves:
- Turning on the device you wish to program (e.g., TV, DVD player).
- Pressing and holding the desired device button (e.g., TV, DVD/VCR, SATELLITE/CABLE, AUDIO/SOUNDBAR, STREAM1/AUX1, STREAM2/AUX2) on the remote until the indicator light illuminates.
- Entering the programming code for your device's brand.
- Testing the remote's functionality with the device.
If the first code does not work, try other codes listed for your brand or use the auto code search method.
Operating Instructions
1. Button Functions
Familiarize yourself with the various buttons on your RCA universal remote:
- POWER: Turns the selected device on or off.
- Device Buttons (TV, SATELLITE/CABLE, DVD/VCR, AUDIO/SOUNDBAR, STREAM1/AUX1, STREAM2/AUX2): Selects the device you wish to control.
- GUIDE/HOME: Accesses the program guide or home menu of the selected device.
- OPTIONS/INFO: Displays options or information about the current program/input.
- CLEAR: Clears entries or closes on-screen displays.
- Navigation Pad (Up, Down, Left, Right, OK): Navigates menus and confirms selections.
- VOL (+/-): Adjusts the volume.
- CH (+/-): Changes channels.
- MUTE: Mutes the audio.
- MENU: Accesses the main menu of the selected device.
- GO BACK: Returns to the previous screen or menu.
- Numeric Keypad (0-9): Enters channel numbers or codes.
- ENTER: Confirms numeric entries.
- INPUT: Changes the input source on the TV.
- Media Control Buttons (REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE): Controls playback functions for devices like DVD players, VCRs, or DVRs.
- Color Buttons (Red, Green, Yellow, Blue): These buttons often have specific functions depending on the device or application, typically indicated on-screen.
2. Device Selection
To control a specific device, press the corresponding device button at the top of the remote (e.g., TV, DVD/VCR). The remote will then send commands to that device until another device button is pressed.
Maintenance
- Cleaning: To clean the remote, wipe it with a soft, slightly damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the remote's performance degrades or the indicator light does not illuminate. Always dispose of old batteries responsibly according to local regulations.
- Storage: Store the remote in a dry place away from extreme temperatures and direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote does not operate device. | Batteries are dead or inserted incorrectly. Remote is not programmed for the device. Device is not turned on. | Replace batteries, ensuring correct polarity. Reprogram the remote for the device using the correct code. Ensure the device is powered on. |
| Some buttons do not work. | Incorrect device selected. Button not supported by the device. | Press the correct device button (e.g., TV, DVD). Some advanced functions may not be supported by universal remotes. |
| Indicator light does not flash when a button is pressed. | Batteries are low or dead. | Replace batteries. |
Specifications
- Brand: RCA
- Model: RCRPST06GBE
- Number of Devices: 6
- Compatible Devices: Television, Satellite/Cable Box, DVD/VCR, Audio/Soundbar, Streaming Devices (Auxiliary)
- Battery Type: 2 x AAA (Alkaline recommended)
- Connectivity Technology: Infrared (IR)
- Dimensions: Approximately 3.81 x 11.43 x 27.94 cm
- Weight: Approximately 136.08 g (without batteries)
- Special Features: Universal, Programmable
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official RCA website. Keep your proof of purchase for warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







