1. Introduction
These Easy@home Carbon Electrode Pads are designed for use with Transcutaneous Electrical Nerve Stimulators (TENS) and Electrical Muscle Stimulators (EMS). They feature a self-adhesive, reusable design with 2mm pin connectors, compatible with various TENS units, including Easy@home models EHE009 and EHE012PRO. This manual provides essential information for the correct application, maintenance, and storage of your electrode pads.
Image: Front and back view of the Easy@home TENS unit carbon electrode pads, showing their square shape and integrated lead wire connectors.
2. Setup and Application
Follow these steps for proper setup and application of the electrode pads:
- Prepare Skin: Clean the skin thoroughly where the electrodes will be applied. Ensure the area is free of lotions, oils, make-up, or dirt, as these can reduce adhesion.
- Connect Wires: Insert the pins of the lead wire from your TENS or EMS device into the electrode wire connectors on the pads.
- Apply Pads: Carefully remove the electrodes from their protective liner and apply them firmly to the skin. Adhesion typically improves as the electrodes reach skin temperature.
- Helpful Hint: For improved adhesion and extended service life, moisten the skin with a damp towel prior to applying the electrodes.
Image: Illustration demonstrating common placement areas for electrode pads on the body, such as the back, shoulders, and legs.
3. Operating Instructions
Once the electrode pads are correctly applied and connected to your TENS or EMS device, operate the device according to its specific instruction manual. The pads facilitate the electrical impulses from the device to the targeted area.
Image: A person using TENS electrode pads on their shoulder, illustrating a typical application during use.
4. Maintenance and Storage
Proper maintenance and storage will extend the life of your electrode pads:
- Storage: After each use, place the electrodes back onto their protective liners and store them in the original PE (polyethylene) bag. Keep the bag in a cool, dry place.
- Pad Longevity: The lifespan of the electrodes varies based on factors such as skin condition, storage environment, frequency of use, type of stimulation, and body part applied to. Following the application and storage instructions carefully can help maximize electrode life.
Image: Easy@home TENS electrode pads shown in their original sealed packaging, ready for storage.
5. Troubleshooting and Cautions
Observe the following cautions and troubleshooting tips:
- Poor Adhesion: If electrodes do not stick well, ensure the skin is thoroughly cleaned and free of any lotions, oils, make-up, or dirt prior to application. Moistening the skin slightly with a damp towel can also improve adhesion.
- Single-Person Use: These electrodes are intended for single-person use only to maintain hygiene and effectiveness.
- Avoid Broken Skin: Do not apply electrodes to broken, irritated, or damaged skin.
- Skin Irritation: Should a skin rash or irritation occur, discontinue use immediately and consult a physician.
- Activity Restrictions: Do not use the TENS unit and electrodes while driving a motorized vehicle or operating heavy machinery.
- Power Limit: Do not exceed a stimulation intensity of 0.1 watts/cm.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | ETP-505 |
| Pad Dimensions | 2" x 2" (Individual) |
| Connector Type | 2mm Pin Connectors |
| Material | Reusable Carbon Adhesive Gel, Flexible White Backing |
| Package Contents | 8 Individual Electrode Pads (2 packs of 4) |
| FDA Clearance | Cleared for OTC (Over-The-Counter) use |
| Package Dimensions | 6.81 x 5.83 x 0.67 inches |
| Item Weight | 2.12 ounces |
| Manufacturer | Easy@Home |
| Date First Available | February 2, 2018 |
Image: Exploded view diagram showing the internal layers of the electrode pad, including the non-woven fabric, conductive carbon film, TENS gel, and protective film.
7. Compatibility
These electrode pads are designed for broad compatibility:
- Connector: Features standard 2mm pin connectors.
- Devices: Compatible with most Transcutaneous Electrical Nerve Stimulators (TENS) and Electrical Muscle Stimulators (EMS) that utilize 2mm pin connectors.
- Easy@Home Units: Specifically compatible with Easy@Home TENS units models EHE009, EHE010, and EHE012PRO.
Image: Detailed view of the 2mm pin connector, highlighting its design for universal compatibility with TENS units.
Image: Easy@home TENS units (EHE009 and EHE012PRO) shown alongside the electrode pads, illustrating their direct compatibility.
8. Support Information
For questions, comments, or support, please contact Easy Healthcare Corporation:
- Toll-Free Phone: 1-855-822-6999 (Monday - Friday, 9 a.m. - 5 p.m. CST)
- Email: service@healthcare-manager.com
- Manufacturer Address: Easy Healthcare Corporation, 360 Shore Dr, Unit B, Burr Ridge, IL 60527, Made in China
