Hampton Bay 847658003157
Hampton Bay 44 in. 3-Light White Integrated LED Track Lighting Kit
User Manual
Model: 847658003157
Introduction
Thank you for purchasing the Hampton Bay 44 in. 3-Light White Integrated LED Track Lighting Kit. This manual provides important information regarding the installation, operation, and maintenance of your new lighting system. Please read this manual thoroughly before installation and retain it for future reference.
Figure 1: Overview of the Hampton Bay 44 in. 3-Light White Integrated LED Track Lighting Kit.
Important Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- Read all instructions carefully before beginning installation.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- Do not install this fixture in wet locations. Suitable for indoor residential spaces only.
- Do not attempt to modify the fixture. Integrated LED lights are not user-replaceable.
- Ensure the mounting surface can support the weight of the fixture.
Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- 1 x 44 in. Linear Track
- 1 x Floating Power Canopy
- 3 x Multi-directional Track Heads (Integrated LED)
- Relevant accessories for installation
Figure 2: The Hampton Bay Track Lighting Kit, an Energy Star certified product.
Installation Instructions
This track lighting kit is designed for semi-flush mount installation. Professional installation is recommended.
- Prepare for Installation: Turn off power at the circuit breaker or fuse box. Ensure the power is completely off before proceeding.
- Mount the Track: Secure the 44-inch linear track to the ceiling using appropriate mounting hardware (included). Ensure the track is firmly attached and level.
- Connect the Power Canopy: Connect the floating power canopy to the electrical junction box in the ceiling. Follow standard wiring procedures (black to black, white to white, ground to ground). Ensure all connections are secure.
- Attach Track Heads: Insert the three multi-directional track heads into the track. Each head should click securely into place.
- Adjust Track Heads: Once installed, adjust the direction of each track head to illuminate desired areas. The heads are multi-directional.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Figure 3: Detail of a single multi-directional track head with integrated LED.
Figure 4: Detail of the floating power canopy connection point on the track.
Operating Instructions
This Hampton Bay track lighting kit is controlled via a remote control (not explicitly stated as included, but "Control Method: Remote" is in specs). Ensure the remote control is paired with the fixture according to its specific instructions (if applicable).
- Power On/Off: Use the designated button on your remote control to turn the lights on or off.
- Dimming: If your remote and electrical system support dimming, use the dimming controls on the remote to adjust the brightness of the integrated LED lights.
- Directional Adjustment: Manually adjust the angle of each track head to direct light as needed.
Maintenance
The Hampton Bay Track Lighting Kit features integrated LED technology, meaning the bulbs are not user-replaceable. This design ensures long-lasting, energy-efficient illumination with minimal maintenance.
- Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power to the fixture; Loose wiring connection; Faulty remote control. | Check circuit breaker/fuse. Ensure all wiring connections are secure. Check remote control battery and pairing. |
| Lights flicker or dim unexpectedly. | Incompatible dimmer switch; Loose connection; Electrical interference. | Ensure dimmer is LED compatible. Check wiring connections. Consult an electrician if problem persists. |
| Remote control not responding. | Dead battery; Not paired correctly; Obstruction. | Replace remote battery. Refer to remote's instructions for pairing. Remove any obstructions between remote and fixture. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Hampton Bay |
| Model Number | 847658003157 |
| Color | White |
| Material | Metal |
| Style | Modern |
| Light Fixture Form | Track Light Head |
| Room Type | Indoor Residential Spaces |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Semi Flush Mount |
| Control Method | Remote |
| Light Source Type | Integrated LED |
| Finish Type | Metal |
| Shade Material | Metal |
| Number of Light Sources | 3 |
| Voltage | 1 Volts |
| Light Color | White |
| Item Weight | 5.26 Pounds |
| Wattage | 12 watts |
| Bulb Base | GU10 |
| Brightness | 1500 lumen |
| Product Dimensions | 5 x 44.13 x 8.66 inches |
Warranty and Support
This product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. For support or warranty inquiries, please contact Hampton Bay customer service or the retailer from whom the product was purchased.
For further assistance, please visit the Hampton Bay website or contact their customer support.
Related documents847658003157
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.