LKPower 180130261

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

LKPower 6V AC Adapter User Manual

For Wacom CTE-630BT and CTE-630BT/T Bluetooth Pen Tablets

Introduction

This manual provides essential information for the safe and effective use of your LKPower 6V AC Adapter. This power supply is designed to provide reliable power to your compatible device or charge its battery from standard electrical outlets. It converts AC power from the wall into the DC power required by your device.

The LKPower AC Adapter is a high-quality replacement power charger, manufactured to meet the power requirements of your device. It features over-voltage and over-heat protection to ensure safe operation.

Compatibility: This adapter is specifically designed for use with Wacom CTE-630BT and CTE-630BT/T Bluetooth Pen Tablets.

Product Overview

LKPower 6V AC Adapter with power cord and DC plug

Figure 1: LKPower 6V AC Adapter. This image displays the main unit of the AC adapter, featuring the standard US two-prong plug, the main body with ventilation slots, and the attached DC output cable with its barrel connector.

Front and side view of LKPower 6V AC Adapter

Figure 2: Front and Side Views of the Adapter. This image provides a clear view of the adapter's front face, showing the input specifications and regulatory marks, alongside a side profile highlighting its compact design.

Dimensions of LKPower 6V AC Adapter and cable length

Figure 3: Adapter Dimensions and Cable Length. This image illustrates the physical dimensions of the adapter unit (approximately 2.6 inches long, 1.6 inches wide, and 1.2 inches thick) and the total cable length (approximately 76 inches).

Setup

  1. Verify Compatibility: Ensure your device requires a 6V power input and has a compatible DC input jack. This adapter is designed for Wacom CTE-630BT and CTE-630BT/T.
  2. Connect to Device: Insert the DC output plug of the AC adapter firmly into the power input port of your Wacom tablet.
  3. Connect to Power Outlet: Plug the AC adapter into a standard electrical wall outlet (AC 100-240V, 50/60Hz).
  4. Power On: Once connected, your device should receive power or begin charging its battery.
LKPower 6V AC Adapter connected to a power strip with a tablet in the background

Figure 4: Adapter in Use. This image shows the AC adapter plugged into a power strip, with a tablet visible in the background, illustrating a typical usage scenario.

Operating Instructions

The LKPower 6V AC Adapter operates automatically once connected. It provides a stable 6V DC output to power your Wacom tablet or charge its internal battery.

  • Ensure the adapter is securely plugged into both the wall outlet and your device.
  • The adapter is designed for continuous operation. However, for optimal lifespan, disconnect it from the wall outlet when not in use for extended periods.
  • The adapter features automatic voltage detection (AC 100-240V), making it suitable for worldwide use with appropriate plug adapters (not included).

Maintenance

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: Store the adapter in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
  • Cable Care: Do not bend, twist, or crimp the power cord excessively. Avoid placing heavy objects on the cord.
  • Inspection: Periodically inspect the adapter and cable for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately.

Troubleshooting

ProblemPossible CauseSolution
Device not powering on/charging.
  • Adapter not fully plugged in.
  • Wall outlet not functioning.
  • Device power port issue.
  • Adapter damage.
  • Ensure all connections are secure.
  • Test the wall outlet with another device.
  • Try another compatible adapter (if available) to rule out device issues.
  • Inspect adapter and cable for visible damage. Discontinue use if damaged.
Adapter feels excessively hot.
  • Overload or faulty device.
  • Poor ventilation.
  • Disconnect immediately. Allow to cool.
  • Ensure adapter is in a well-ventilated area.
  • If overheating persists, discontinue use and contact support.
Intermittent power supply.
  • Loose connection.
  • Damaged cable or connector.
  • Check all connections for tightness.
  • Inspect cable and connector for damage. If damaged, replace the adapter.

Specifications

  • Model Number: 180130261
  • Input: AC 100-240V, 50/60Hz (Worldwide AC Input)
  • Output: 6V DC (Specific amperage not provided, but compatible with Wacom CTE-630BT/T)
  • Main Power Connector Type: 2 Pin (US Standard)
  • Cable Length: Approximately 76 inches (193 cm)
  • Features: Over Voltage Protection, Over Heat Protection
  • Compatible Devices: Wacom CTE-630BT, Wacom CTE-630BT/T Bluetooth Pen Tablets
  • Manufacturer: LKPower

Warranty and Support

This LKPower AC Adapter is designed for reliability and performance. While specific warranty details are not provided in this manual, standard return policies typically apply for new products. For any issues, questions, or support needs, please refer to the seller's return policy or contact the manufacturer directly through their official channels.

Always ensure you purchase from authorized sellers to guarantee product authenticity and access to support.

© 2023 LKPower. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.