1. Introduction
Welcome to the user manual for your new Fossil Townsman FS5437 Men's Quartz Chronograph Watch. This timepiece combines classic design with modern functionality, featuring a chronograph movement and a durable leather strap. Designed with inspiration from 1960s architectural and automotive aesthetics, the Townsman offers a clean, symmetrical style with elevated construction. Its elegantly vaulted hands, beveled indices, and shapely case ensure a timeless appeal.
Figure 1: Fossil Townsman FS5437 Watch, front view.
2. Watch Components
Familiarize yourself with the key components of your Fossil Townsman watch:
- Case: 44mm round black stainless steel case.
- Dial: Brown satin dial with brown/cream accents, featuring three sub-dials.
- Crystal: Hardened mineral crystal lens, designed to resist scratches.
- Crown: Located on the right side of the case, used for setting time and date.
- Pushers: Two pushers located above and below the crown, used for chronograph functions.
- Watch Band: Dark brown, genuine leather strap with a secure adjustable buckle closure. Interchangeable with all 22mm Fossil watch straps.
- Movement: Accurate Quartz movement with chronograph analog display.
Figure 2: Side view of the watch, highlighting the crown and pushers.
3. Setup and Operation
3.1 Setting the Time
- Pull the crown (middle dial) out to position 2. The second hand will stop.
- Turn the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
- Once the time is set, push the crown back into position 0.
Note: Some models may have two pull positions for the crown. The first pull position (position 1) is typically for setting the date, while the second pull position (position 2) is for setting the time. If your watch has a date window, refer to section 3.2.
3.2 Setting the Date (if applicable)
If your watch features a date window, follow these steps:
- Pull the crown out to position 1 (the first click).
- Turn the crown clockwise or counter-clockwise to adjust the date.
- Once the date is set, push the crown back into position 0.
Important: Avoid setting the date between 9 PM and 3 AM, as this can interfere with the date change mechanism. If you need to set the date during this period, first set the time outside this range, adjust the date, then reset the time.
3.3 Using the Chronograph (Stopwatch)
Your Townsman watch is equipped with a chronograph function, allowing it to act as a stopwatch. The three sub-dials track minutes, seconds, and 24-hour time.
- Start: Press the top pusher to start the chronograph. The large second hand and the sub-dial hands will begin moving.
- Stop: Press the top pusher again to stop the chronograph. The elapsed time will be displayed on the sub-dials.
- Reset: Press the bottom pusher to reset the chronograph hands to their zero positions.
- Split Time (if available): Some chronographs allow for split-time measurement. Press the bottom pusher while the chronograph is running to freeze the hands and read an intermediate time. Press the bottom pusher again to allow the hands to catch up and continue timing.
Figure 3: Close-up of the watch dial, showing the chronograph sub-dials.
4. Maintenance
4.1 Water Resistance
Your watch is water resistant up to 50 meters (165 feet), or 5 ATM. This means it is suitable for short periods of recreational swimming and showering. It is not recommended for diving or snorkeling. Always ensure the crown is fully pushed in before exposing the watch to water.
4.2 Battery Replacement
The watch is powered by a Quartz movement and requires one C battery (SR920SW). When the battery needs replacement, it is recommended to take your watch to an authorized Fossil service center or a professional watch repairer. Attempting to replace the battery yourself may void the warranty or damage the watch.
4.3 Leather Strap Care
The genuine leather strap is designed for comfort and durability. To maintain its appearance and longevity:
- Avoid prolonged exposure to direct sunlight or extreme temperatures.
- Keep the strap dry. If it gets wet, gently wipe it with a soft, dry cloth and allow it to air dry naturally.
- Clean with a damp cloth and mild soap if necessary, then wipe dry.
- Leather straps can be interchanged with any 22mm Fossil watch strap.
Figure 4: The watch on a wrist, showcasing the brown leather strap.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch is not running. | Battery is depleted or crown is pulled out. | Push the crown fully into position 0. If the watch still does not run, the battery may need replacement by a professional. |
| Chronograph hands do not reset to zero. | Misalignment due to impact or magnetic fields. | Consult the full Fossil watch manual for specific chronograph calibration instructions, or take it to an authorized service center. |
| Date does not change at midnight. | Time is set to AM instead of PM, or vice-versa. | Advance the time by 12 hours. Ensure the date is not set between 9 PM and 3 AM. |
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | FS5437 |
| Brand | Fossil |
| Case Diameter | 44 Millimeters |
| Case Thickness | 12 Millimeters |
| Band Width | 22 Millimeters |
| Band Material Type | Leather calfskin |
| Band Color | Brown |
| Dial Color | Black |
| Watch Movement Type | Quartz |
| Display Type | Analog |
| Water Resistance Depth | 50 Meters (165 Feet) / 5 ATM |
| Crystal Type | Mineral |
| Item Weight | 2.6 Ounces |
| Included Components | Strap removal tool |
Figure 5: Fossil watch case size guide for round cases.
7. Warranty and Support
Your Fossil Townsman watch comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. For further assistance, product registration, or to locate an authorized service center, please visit the official Fossil website or contact their customer support.
Official Fossil Website: www.fossil.com
Figure 6: Example of Fossil watch packaging.
