1. Introduction
Welcome to the user manual for your new Dimplex PLX125 1.25kw Electronic Controlled Panel Heater. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your appliance. Please read this manual thoroughly before using the heater and retain it for future reference.
Figure 1: Dimplex PLX125 1.25kw Electronic Controlled Panel Heater. This image shows the front view of the white panel heater with horizontal vents at the top and vertical grooves along its body.
2. Important Safety Information
Always observe the following safety precautions to reduce the risk of fire, electric shock, or injury.
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- To disconnect heater, turn controls to off, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has a Tip-Over Protection feature which automatically shuts off the unit if it is accidentally knocked over.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
3. Product Overview
The Dimplex PLX125 is a 1.25kw electronically controlled panel heater designed for efficient and compliant heating. It features a sleek, modern design suitable for various indoor environments.
Key Components:
- Control Panel: Located on the side or top, housing the electronic thermostat and operational buttons.
- Air Outlet: Vents located at the top for warm air distribution.
- Power Cord: For connecting to the mains supply.
- Mounting Brackets: (If wall-mounted) For secure installation.
4. Setup
The Dimplex PLX125 heater is designed for either wall mounting or floor standing (with optional feet, not included). Ensure the chosen location is away from curtains, furniture, and other flammable materials.
4.1 Wall Mounting (Typical for Panel Heaters)
- Choose Location: Select a suitable wall location, ensuring adequate clearance from corners, ceilings, and floors as specified in the installation guide (refer to separate installation instructions if provided with packaging).
- Marking: Use the provided wall bracket as a template to mark drilling points on the wall.
- Drilling: Drill holes and insert appropriate wall plugs (not supplied).
- Attach Bracket: Securely screw the wall bracket to the wall.
- Mount Heater: Carefully lift the heater and hook it onto the wall bracket, ensuring it clicks securely into place.
4.2 Electrical Connection
- Ensure the mains supply voltage matches the heater's rating (230 Volts AC).
- Plug the heater directly into a suitable wall socket. Do not use extension cords or multi-plugs.
- Ensure the power cord is not trapped or stretched and is kept away from hot surfaces.
5. Operating Instructions
Your Dimplex PLX125 heater features an electronic thermostat for precise temperature control.
5.1 Powering On/Off
- To Turn On: Plug the heater into the mains socket and press the power button on the control panel. The display will illuminate.
- To Turn Off: Press the power button again. The display will turn off. For complete disconnection, unplug from the mains.
5.2 Setting the Temperature
- With the heater powered on, use the '+' and '-' buttons on the control panel to adjust the desired room temperature.
- The display will show the set temperature. The heater will automatically maintain this temperature, switching on and off as required.
5.3 EcoDesign Compliance
This heater is EcoDesign compliant, meaning it meets stringent energy efficiency standards. It incorporates features to optimize energy consumption, such as accurate electronic temperature control.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your heater.
6.1 Cleaning
- Always unplug the heater from the mains supply and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, polishes, or chemical solvents.
- Do not immerse the heater in water or any other liquid.
- Periodically vacuum the air inlet and outlet grilles to remove dust and lint.
6.2 Storage
If the heater is not to be used for extended periods, store it in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.
7. Troubleshooting
If you experience issues with your heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Power button not pressed. Tip-over protection activated. | Check if the heater is plugged in and the wall socket is active. Press the power button. Ensure the heater is upright on a flat, stable surface. |
| Heater is on but not heating. | Temperature setting too low. Room temperature already reached. | Increase the set temperature. The heater will cycle on/off to maintain the set temperature. This is normal operation. |
| Unusual smell or noise. | New heater smell (normal initially). Dust accumulation. | Initial smell will dissipate after a few uses. Unplug and clean the heater as per maintenance instructions. |
If the problem persists after trying these solutions, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Dimplex |
| Model Number | PLX125E |
| Item Weight | 6.1 kg |
| Voltage | 230 Volts (AC) |
| Special Feature | Tip-Over Protection |
| Form Factor | Pedestal (can be floor mounted with optional accessories) |
| Indoor/Outdoor Usage | Indoor |
| Mounting Type | Floor Mount (with optional accessories) / Wall Mount |
9. Warranty and Support
Your Dimplex PLX125 heater comes with a manufacturer's warranty. Please refer to the warranty card included with your product packaging for specific terms and conditions.
For technical support, spare parts, or service inquiries, please visit the official Dimplex website or contact their customer service department. Ensure you have your model number (PLX125E) and purchase details ready when contacting support.
For more information, visit the Dimplex Store on Amazon.
