CLP Pacific Office Chair with Massage Function User Manual

1. Introduction

Thank you for choosing the CLP Pacific Office Chair with Massage Function. This ergonomic office chair is designed to provide comfort and support during long periods of sitting, featuring adjustable height, recline, a retractable footrest, and an integrated massage system. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair.

Please read this manual thoroughly before using the chair and retain it for future reference.

2. Safety Warnings

WARNING: To prevent injury or damage, adhere to the following safety guidelines:

• Use the massage function strictly according to the instructions provided in this manual.
• Do not use the chair if any components are damaged, missing, or appear to be faulty. Contact customer support immediately.
• The chair is designed to support a maximum weight of 150 kg (approximately 330 lbs). Exceeding this weight limit may cause damage to the chair or lead to personal injury.
• Ensure all connections for the massage function are securely plugged in before use.
• Keep children and pets away from the chair's moving parts during adjustment.

3. Setup and Initial Inspection

Your CLP Pacific Office Chair is designed for straightforward setup. While specific assembly steps are not detailed in the provided product information, general guidelines for initial setup and inspection are as follows:

1. Unpacking: Carefully remove all components from the packaging. Place them on a soft, clean surface to prevent scratches.
2. Component Check: Verify that all parts are present and undamaged. Refer to the product images for a visual guide.
3. Base Assembly: If the chair base (with casters) is separate, attach it securely to the chair's main seat mechanism. Ensure casters are firmly inserted into the base.
4. Stability Check: Before first use, ensure all connections are tight and the chair is stable on a flat surface.
5. Power Connection: For the massage function, locate the power cable (approximately 188 cm long) and plug it into a standard 230V (EU) power outlet.

Figure 3.1: Fully assembled CLP Pacific Office Chair in Taupe, showing the main structure and remote control storage.

4. Operating Instructions

The CLP Pacific Office Chair offers several adjustable features and a massage function for enhanced comfort.

4.1. Chair Adjustments

• Height Adjustment: Use the lever located under the seat (typically on the right side) to adjust the chair's height. Lift the lever to raise or lower the seat. Release the lever to lock the height. The seat height is adjustable from 47 cm to 56 cm.
• Backrest Recline: The backrest can be adjusted for recline. Locate the recline mechanism (often a lever or knob on the side) and adjust to your desired angle.
• Retractable Footrest: Pull the footrest out from under the seat to extend it. Push it back in when not in use. This allows for comfortable reclining.

Figure 4.1: Side view of the chair, illustrating the retracted footrest position.

Figure 4.2: Detail of the footrest mechanism and the convenient side pocket for the massage remote.

4.2. Massage Function

The chair features an integrated massage function controlled by a wired remote. Ensure the chair is plugged into a 230V (EU) power outlet before use.

• Power On/Off: Use the designated button on the remote control to activate or deactivate the massage function.
• Intensity Levels: Select from 2 intensity levels to customize your massage experience.
• Massage Modes: Choose from 5 distinct massage modes: Pulse, Press, Wave, Auto, and Normal.
• Massage Points: The system targets 7 specific massage points: 1 for the head, 2 for the back, 2 for the lumbar vertebrae, and 2 for the thighs.
• Timer Function: Set the massage duration to 15 minutes, 30 minutes, or 60 minutes. The massage will automatically stop after the selected time.

Figure 4.3: Visual representation of the 7 massage points located in the headrest, backrest, lumbar area, and seat.

Figure 4.4: Underside view detailing the massage mechanism and wiring for the remote control.

5. Maintenance

Regular maintenance helps prolong the life and appearance of your office chair.

• Fabric Care: The chair's upholstery is 100% polyester fabric. For general cleaning, use a soft brush or vacuum cleaner to remove dust and loose debris. For spills, gently blot with a clean, damp cloth and mild soap solution. Avoid harsh chemicals or abrasive cleaners.
• Frame and Base: Wipe the chrome-plated metal base and plastic components with a soft, damp cloth. Dry thoroughly.
• Casters: Periodically check the casters for accumulated hair or debris and clean them to ensure smooth movement.
• Fasteners: Occasionally check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
• Electrical Components: Ensure the massage unit's power cord and remote control are not pinched or damaged. Unplug the chair from the power outlet when not in use for extended periods or during cleaning.

6. Troubleshooting

If you encounter issues with your CLP Pacific Office Chair, refer to the following common troubleshooting tips:

• Chair Squeaks: Check all bolts and screws for tightness. Apply a small amount of silicone lubricant to moving metal parts if squeaking persists.
• Height Adjustment Not Working: Ensure the gas lift lever is fully engaged. If the chair consistently sinks, the gas lift cylinder may need replacement.
• Casters Not Rolling Smoothly: Inspect casters for debris (hair, lint) and clean them. Ensure they are securely inserted into the base.
• Massage Function Not Activating:
  • Verify the power cord is securely plugged into both the chair and a working 230V (EU) power outlet.
  • Check the remote control for any visible damage.
  • Ensure the power button on the remote is pressed.
• Chair Feels Unstable: Double-check that the base is correctly attached and all screws are tightened. Ensure the chair is on a flat, even surface.

If these steps do not resolve the issue, please contact CLP customer support for further assistance.

7. Specifications

8. Warranty and Support

Information regarding specific warranty terms and conditions for the CLP Pacific Office Chair is not available in the provided product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer or the manufacturer, CLP, directly.

Please have your model number (1924518124) and proof of purchase ready when contacting support.